RENOVATION OF COMMUNITY HALL BUILDING AT ALAGANERI VILLAGE OF T.KURUVIKULAM VILLAGE PANCHAYAT KURUVIKULAM BLOCK TENKASI DISTRICT

RENOVATION OF COMMUNITY HALL BUILDING AT ALAGANERI VILLAGE OF T.KURUVIKULAM VILLAGE PANCHAYAT IN KURUVIKULAM BLOCK _ TENKASI DISTRICT

Dismantling Brick Work and Clearing away from the site and unused meterials including all labour Charges etc complete.,

Dismantling Chipping for Plastering surface and Clearing away from the site and unused meterials including all labour Charges etc complete.,

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement Concrete 1:4:8 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site, labour charges for mixing, laying, compacting and curing concrete etc., complete

Cement Concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site, labour charges for mixing, laying, compacting and curing concrete etc., complete

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum.

Brick work with cement mortar 1:5 mix using Country bricks for Foundation, Basement and Superstructure inculding cost and conveyance of all materials to site, labour charges for curing and other incidental charges etc ,complete.(Bricks Size - 8 3/4" x 4 1/4" x 2 3/4")

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete.

Plastering with Cement Morter 1:5 mix, 12mm thick Smooth finish for Brick, RR masonry surface and other Concrete surfaces inculding cost and conveyance of all materials to site and all other labour charges, incidental charges etc., complete

Distembering two coats Oil Bound Distember over priming coat inculding cost and conveyance of all materials to site and all labour charges for preparing the surface, scrapping, attaining smooth finish etc., complete (Inner wall)

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting two coats over Old Iron work such as doors, windows, ventilators, windows bars, balustrades etc., with best approved best quality of synthetic enamal paint of approved colour over the existing priming coat etc., complete

Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm X 2 cm laid in cement mortar 1:3 (One cement and three Sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight.

Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete for 10 cum

Dadooing of walls with Printed design glazed tiles of size 30 cm x20cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10Sqm.

Paving the floor with best quality Stain free Nano Polish Vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

Supply and fixing of steel door and windows with steel angles of size 35 x35 x5 mm and stell sheet of 18 gauge thickness including cost and conveyance of all materials to site and all labour charges etc complete. [Door - 0.90m x 2.10m]

Supply and fixing of steel door and windows with steel angles of size 35 x35 x5 mm and stell sheet of 18 gauge thickness including cost and conveyance of all materials to site and all labour charges etc complete. [Door - 0.90m x 2.10m]

Supply and fixing of steel door and windows with steel angles of size 35 x35 x5 mm and stell sheet of 18 gauge thickness including cost and conveyance of all materials to site and all labour charges etc complete. [Door - 0.90m x 2.10m]

Supply and fixing of 1000 litre capacity HDPE tank

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}