Special repairs including all Civil works, Internal and External Electrical works DG Sets Substation equipments and Plumbing and Drainage works

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Different Civil & Electrical works related to maintenance purpose based on DSR-2023 &

2022 respectively

DSR 2023 Rate as per

I /Non-DSR Civil Works 2023 DSR

Providing and laying in position cement concrete of specified grade excluding the cost of centring

and shuttering - All work up to plinth level :

1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including manufactured sand derived from Recycled

Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal size including

Recycled Concrete

Aggregate (RCA) upto 25%).

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,

over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching

shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved

3 11.41A make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), 0.00

including grouting the joints with white cement and matching pigments etc.,

11.41.A.1 Double charge vitrified tile polished finish of size 0.00

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm

(both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm

thick with flanges of 27 mm and 37mm, at 1200 mm centre

to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm

dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with

nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5

mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at

450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm

long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including

jointing and finishing to a flush finish of tapered and square edges of the board with recommended

jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150

mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s

specification and also including the cost of making openings for light fittings, grills, diffusers,

cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer

in Charge but excluding the cost of painting with :

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

5 12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board sqm 100 1529.10 152910.00

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal

level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @

120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to

get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at

1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum)

sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of

1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm

thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of

600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture

in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats

of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners,

4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at

1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be

pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as

directed by Engineer-in-charge

12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre

conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm

5 12.52.4 c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on sqm 50 1528.00 76400.00

the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board,

including providing and fixing of frame work made of special section power pressed/ roll form G.I.

sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel

50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the

spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or

suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one

flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor

and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener

9.105 or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to

both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the

spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints

staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two

flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs

using metal to metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5

mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and

direction of engineer in charge all complete.

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced

Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks)

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum

plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand

8 13.80 and manufacturer, over the plastered wall surface to prepare the surface even and smooth sqm 500 156.05 78025.00

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy

touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.

complete at all levels.

9 8.2.2.2 Area of slab over 0.50 sqm sqm 10 5136.30 51363.00

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen

10 8.5 platform, vanity counter and similar location in marble/ Granite/stone work, including necessary each 20 978.70 19574.00

holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic

enamel paint of approved brand and manufacture and required colour on old work :

11 13.94.2 100 mm diameter pipes metre 500.00 35.50 17750.00

12 13.94.3 150 mm diameter pipes metre 800.00 51.20 40960.00

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic

Compound ) content less than 50 grams/ litre of approved brand and manufacture, including

applying additional coats wherever required to achieve even shade and colour.

Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an

13.109 Finishing walls with water proofing cement paint of required shade : 0.00

Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80

litres/10 sqm complete including cost of Priming coat.

13.110 Finishing walls with textured exterior paint of required shade : 0.00

16 13.110.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 litre/10 sqm. sqm 200 218.54 43708.00

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded

built up standard tubular sections/ appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap beading for glazing /

panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) :

17 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 100 530.90 53090.00

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long

with SS screws etc .complete as per direction of Engineer-in-Charge.

18 21.12.1 Anodized (AC 15 ) aluminium tubular handle bar each 5 575.75 2878.75

19 21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar. each 5 631.55 3157.75

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and

manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement

and making necessary holes etc. for fixing required door fittings, all complete as per direction of

Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate

false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on

inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm

including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and

of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre,

and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced

between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross

‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter

locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery

21 12.53 walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 sqm 20 2158.15 43163.00

mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long

dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling

tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers,

grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be

suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm

dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of

size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24

mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per

specifications, drawings and as directed by Engineer-in-Charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including

22 15.57 disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters sqm 100 56.35 5635.00

lead as directed by Engineer-in-charge. Page 6 of 25 Digitally signed by AMIT

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give SINGH

an even shade :

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

24 13.99.1 One or more coats on old work sqm 2000 102.80 205600.00

25 13.114 Melamine polishing on wood work (one or more coat). sqm 250 1192.30 298075.00

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under,

including cutting the patch in proper shape, raking out joints and preparing and plastering the

surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres

26 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) sqm 50.00 547.40 27370.00

27 14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) sqm 10 560.50 5605.00

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required

pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick

stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)

11.51 laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry

admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble

stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore.

28 11.51.1 18mm Italian Marble stone slab, Perlato , Rosso Verona,Fire Red or Dark Emperadore. Sqm 10 9971.48 99714.80

Providing and fixing machine cut, mirror / eggshell polished , Marble stone work for wall lining

(veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever

required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3

8.11 (1 cement : 3 oarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including

pointing with white cement slurry admixed with pigment of matching shade, including rubbing,

curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-

29 8.11.1 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. sqm 10 10414.80 104148.00

30 2407.0 Float glass sheet of nominal thickness 5.5 mm (weight not less than 13.50 kg/sqm) sqm 50 515.00 25750.00

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work

15.10 manually/ by mechanical means including stacking of serviceable and disposal of unserviceable 0.00

material within 50 metres lead as per direction of Engineer-in-charge :

31 15.10.2 In cement mortar cum 1 2877.75 2877.75

Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned

materials will be measured) :

32 15.11.2 In cement mortar cum 1 689.20 689.20

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven

story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes

joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase

system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for

the required duration as approved and removing it there after .The scaffolding system shall be

stiffened with bracings, runners, connection with the building etc wherever required for inspection of

work at required locations with essential safety features for the workmen etc. complete as per

directions and approval of Engineering-charge .The elevational area of the scaffolding shall be

measured for payment purpose .The payment will be made once irrespective of duration of

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded

wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I,

Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing

arrangement and screws etc. complete :

Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug

and drilling necessary holes for rawl plug etc. including priming coat complete.

34 8.27.1 Kiln seasoned and chemically treated hollock wood cum 0.25 187277.65 46819.41

Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer

and of required shade and colour complete as per manufacturer’s specification.

35 13.42.1 One or more coats on old work sqm 2000 92.75 185500.00

Mirror polishing on marble work/Granite work/stone work where ever

required to give high gloss finish complete.

13.46 Finishing walls with Acrylic Smooth exterior paint of required shade : 0.00

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior

primer applied @ 2.20 kg/ 10 sqm)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

foundation and plinth in:

38 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 5 7370.65 36853.25

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50

39 15.12.1 Of area 3 sq.meters and below Sqm 10 367.20 3672.00

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and

disposal of unserviceable material within 50 metres lead.

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying

cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of

slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm.

This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242

kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to

air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of

surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer

Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size

666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with

bonding plaster as per manufacturer’s specifications in uperstructure above plinth level up to floor

V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2

Polishing in high gloss/matt finish melamine clear polish on wood work in required colour/wooden

shade texture with following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of

160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for

1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with

emery cloth of finer grading with ample water to remove excess sealer layer and make the surface

further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to

43 13.116 fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs. on which sqm 10 3,049.85 30498.50

again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat

of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in

required proportion. This 1st coat is allowed to dry for 24 hrs. then this dry surface is again fine wet

rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with

compressor pressure spray gun using melamine clear polish and melamine thinner mixed in

required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2

layers without gap of time.)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,

including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all

complete.Structural steel work riveted, bolted or welded in built up sections, trusses and framed

work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel

44 10.2 primer all complete.Structural steel work riveted, bolted or welded in built up sections, trusses and Kg 1000 111.95 111950.00

framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved

steel primer all complete.Structural steel work riveted, bolted or welded in built up sections, trusses

and framed work, including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer all complete.

Total Amount of DSR (Civil) 2023 : (A) 3625444.36

Total Amount of DSR (Civil) 2023 : (A) 3625444.36

II /Non-DSR Electrical Works

Supplying and drawing following sizes of FRLS PVC insulated copper conductor , single core cable in

the existing surface/ recessed steel/ PVC Conduit as required Page 9 of 25 Digitally signed by AMIT

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Supplying and drawing following pair 0.5 dia FRLS PVC insulated annealed copper conductor ,

unamored telephone cable in the existing surface/ recessed steel/ PVC Conduit as required

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

7 1.21 surface/ recess including cutting the wall and making good the same in case of recessed conduit as

Supplying and drawing of UTP 4 Pair CAT 6 LAN Cable in the existing surface/recessed Steel/PVC

conduit as required.

Supplying , laying, fixing testing and commissioning of following thickness closed cell elastrometric

12 16.5 nitrile rubber of class O applied by suitable adhesive , as per specifications and as required complete

Supply , installation , balancing and commissioning of fabricated at site GSS sheet metal rectangular

/ round ducting complete with neoprene rubber gaskets, elbows , splitter dampers,vanes ,hangers

support etc. as per approved drawings and specifications of following sheet thickness complete as

Supplying & Fixing of powder coated extruded aluminium supply Air Grills with aluminium volume

control dampers as per specifications.

Supplying, Fixing testing commissioning of supply air diffusers of powder coated aluminium with

aluminium volume control dampers with anti smudge ring & removable core.

Supplying, Fixing testing commissioning of out air diffusers of powder coated aluminium with

aluminium volume control dampers with anti smudge ring & removable core.

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS

1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing

the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats

of synthetic enamel paint of required shade complete as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

18.11 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS

13095 of following sizes as required :

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

II Electrical Works DSR

LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) Supplying,

Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/

Rectangular) SMD type of following body material with PMMA and prismatic diffuser and

construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C,

internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95,

IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time

(LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen

maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM

8.1 (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the

specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/

Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external

connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and

earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and

<120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS

shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per

requirement. (Thermal management: heat sink of aluminium housing such that LED junction

temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including

LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing

& Commissioning of Panel light 2x2 ft., of following body material and construction as per IS :

10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-

270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5

KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified

Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical

circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as

per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI

Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not

more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word

Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external

connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and

earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120

lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall

be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.

(Thermal management: heat sink of aluminium housing such that LED junction temperature shall

not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Total Amount of DSR (Electrical) 2022 & 2025 : (B) 7164564.00

Total Amount of DSR (Electrical) 2022 & 2025 : (B) 7164564.00

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

III Non DSR Items Civil & Electrical

Charges for providing and fixing of Glass of ST 408 DEEP GREEN colour of size 6mm including

complete fitting , Labour as per instruction of Engineer In charge.

Charges for providing and fixing of 12mm thick Toughened glass partition include complete fitting

as per instruction of Engineer In charge.

Charges for providing of Floor spring machine of make Door set/ Dorma including labour for

complete fitting.

Charges for providing of glass door pivots of make Door set/ Dorma including labour for complete

Providing & fixing of GYPSUM tiles 595x595 mm,12.5 mm thick fully Perforated Gypsum Board tile

made from plasterboard having glass fibre conforming to IS: 2095 part.

6 MR 6 Providing & fixing of 12.5 mm thick tapered edge gypsum moisture resistant board. Sqm 50 786.59 39329.40

Rewinding & repairing of electric motors (copper) of different capacity with other accessories

complete as required:-

Providing & fixing of looking mirror glasses of 6mm thick including bevelling, holes studs complete

as per direction of Engineer In charge.

Providing and fixing of Hind ware/parry ware washbasin including fitting, cutting and making good

wall wherever required as per direction of Engineer In charge.

28 MR 10 Charges for providing and Fixing of Anti Skid Tape. metre 10 465.40 4653.98

29 MR 11 Supply of choke 13 watt No 50 196.65 9832.35

30 MR 12 Charges for supplying and fixing of exhaust fan. No. 20 3277.45 65549.00

31 MR 13 Supply and fixing of floor mat Sqm 50 917.69 45884.30

34 MR 14 Supply and fixing of CAT 6 LAN I/O , Make D link No. 100 249.09 24908.62

Providing and fixing in position film of approved colour, designPage

of 25 over glass wherever Digitally signed by AMIT

required complete in all respects.

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

38 MR 16 Supply of lift light 7watt No. 50 1245.43 62271.50

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Providing and fixing of Eco clik locking system on the edges 5mm thick, antifungal Castor chair

39 MR 17 resistant chemical resistant, fire resistant formal dehyde LVT flooring as per approved shade as per sqm 50 3932.94 196647.00

site condition and direction of Engineer In Charge.

40 MR 18 Dismentaling & refixing of table & mic at attrium 11th floor of CBI HQ Building Job 2 83902.72 167805.44

41 MR 19 SITC of polycarbonate sheet 8mm thick including fastners , screws etc. complete in all respect Sqm 50 3277.45 163872.50

SITC of Sump pumps with Head of 20 meters and discharge 202 LPM kirloskar 2200 CW 3 HP with

automatic start panel float switch control cabling power cabling complete in all respects

Total Amount of Non- DSR : (C) 2674024.44

Total Amount of Non- DSR : (C) 2674024.44

IV Plumbing and Drainage works - Non.DSR items

Maintenance & up keep of Plumbing, Sanitary, Carpentry and water supply with external drainage

installation complete to keep the system operational and cleaning of underground and over head Per

water tank etc. at all time including Sunday & other Holiday. Water Supply and Plumbing System month

Complete Whole external drainage system.

2 1.1 Under ground & Over head tank cleaning & repair etc. 2 72,103.90 144207.80

3 1.2 Supply of Hand spray set of Jaquar make. No. 50 1,835.37 91768.60

4 1.3 Supply of Bottle trap of Jaquar make. No. 50 1,966.47 98323.50

5 1.4 Supply of Soap Dispenser of Jaquar make. No. 10 1,573.18 15731.76

6 1.5 Supply of Sink Waste Jali of 4" No. 50 917.69 45884.30

7 1.6 Supply of Ball cock of Flushing cistern of make superflo. No. 50 655.49 32774.50

8 1.7 Supply of EWC seat of S type of make Hind ware or Equivalent. No. 5 20,320.19 101600.95

9 1.8 Supply of EWC seat cover of S type of make Hind ware or Equivalent. No. 10 1,900.92 19009.21

10 1.9 Supply of heavy duty flexible connection pipe 45cm to 90cm No. 100 242.53 24253.13

11 1.10 Supply of UPVC 6 KG pressure pipe 75mm metre 100 327.75 32774.50

12 1.11 Supply of UPVC 6 KG pressure pipe 110mm metre 50 458.84 22942.15

13 1.12 Supply of Mixture Phase /spindle No. 50 589.94 SINGH 29497.05

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

14 1.13 Supply of Flexible pipe of sink No. 100 183.54 18353.72

15 1.14 Supply of Drain jali 4" No. 100 131.10 13109.80

16 1.15 Supply of Drain jali 3" No. 100 117.99 11798.82

17 1.16 Supply of Drain jali 5" No. 100 150.76 15076.27

18 1.17 Supply of Paper Holder of Jaquar make No. 15 2,359.76 35396.46

20 1.19 Supply of Hexa blade No. 17 28.84 490.31

21 1.20 Supply of Dhaga Gola No. 20 20.98 419.51

22 1.21 Supply of Safeda 2 655.49 1310.98

23 1.22 Supply of Teflon tape No. 15 28.84 432.62

24 1.23 Supply of Mixture tap of Jaquar make. No. 5 5,506.12 27530.58

25 1.24 Supply of Duracell battery No. 500 81.28 40640.38

26 1.25 Supply of Urinal battery Box set No. 50 1,310.98 65549.00

27 Carpentry material - 0.00

28 1.26 Supply of Door closer No. 25 3,015.25 75381.35

29 1.27 Supply of Goodrej Lock set No. 25 3,277.45 81936.25

30 1.28 Supply of Steel Door Handle No. 15 1,900.92 28513.82

31 1.29 Supply of Star Screw 1.5" No. 1450 5.24 7603.68

32 1.30 Supply of Star Screw 2" No. 350 5.24 1835.37

33 1.31 Supply of SR Solution 998 Kg 1 1,310.98 1310.98

34 1.32 Supply of Fevicol Kg 3 393.29 1179.88

37 1.35 Supply of Trishul Bit (20mm)

No. 1 3.93 3.93by AMIT

Digitally signed

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

38 1.36 Supply of Gypsum patch 3/4" No. 1500 3.93 5899.41

39 1.37 Supply of Gypsum patch 1/2" No. 2000 3.93 7865.88

40 1.38 Supply of PVC Gitti screw 1/2" & 2' No. 350 3.93 1376.53

41 1.39 Supply of normal door stopper No. 40 393.29 15731.76

42 1.40 Supply of push door stopper No. 5 249.09 1245.43

44 1.42 Supply of double tape No. 5 353.96 1769.82

46 1.44 Supply of hinges 4" No. 4 170.43 681.71

47 1.45 Supply of back rubber No. 5 78.66 393.29

48 1.46 Supply of Glass door stopper No. 20 655.49 13109.80

49 1.47 Supply of Door cylinder lock set 8" No. 20 3,277.45 65549.00

50 1.48 Supply of drawer lock No. 50 524.39 26219.60

51 1.49 Supply of L Drop 3" (Golden Color) No. 2 878.36 1756.71

52 1.50 Supply of L Drop 6" (Steel Color) No. 2 996.34 1992.69

53 1.51 Supply of L Drop 8" (Steel Color) No. 2 1,101.22 2202.45

54 1.52 Supply of Toilet door lock No. 1 1,573.18 1573.18

55 1.53 supply of PVC gitti 1.5" Pkt 35 72.10 2523.64

56 1.54 Supply of PVC gitti 2" Pkt 1 85.21 85.21

63 1.60 Supply of Bib cock (tap) Page 18 of 25 No 50 1,709.97 Digitally85498.70

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

V Internal & External Electrical Works

Operation & Routine Maintenance of all Internal Electrical installation works(emergency as well as

normal system) on floors including floor panels, sub mains, cables, DBs, point wiring, fixtures, bus

ducting / rising mains etc. of the different floors as per installation in the building / campus

complete as per the terms and conditions of the Contract, Electrical Installations / Street lights/

D.G sets/Substation & Distribution system.Compound Lights, street lights, feeder pillar and all

power cables and other items related to this for the whole campus all the installation complete as

per terms and conditions of the contract. Maintenance and upkeep of all internal electrical

installations in basements including sub mains, cables, DBs, point wiring, fixtures, bus ducting /

1 2.1 rising mains etc. of the basements (I and II) complete as per terms and conditions of the 12.00 8,64,131.28 10369575.30

contract.Running Operation &Maintenance of DG Set of capacity 3 Nos. 1010 KVA each and 1 No.

750 KVA on all the days round the clock including Sunday & Holidays complete with all materials i/c

Mobil oil, grease etc. and all other such things required for its satisfactory functioning including the

allied pumping system and cooling towers etc. but excluding diesel oil complete as per terms and

conditions of the contract.Substation & Distribution System for Running Maintenance and upkeep of

all HT, LT electrical installation including panels, transformers, bus ducts, rising main, power cables,

earthing pits, lightening protection systems, UPS etc. upto floor panel as per terms and conditions

of the contract.

Servicing/repairing and cleaning of 63 Nos. LT Panels, including capacitor panals,HVAC

panals,Rising main panel.

Servicing of 3 Nos x 1010 KVA + 1 No x 750 KVA DG sets. Brief work consist of B-check after 6

3 2.3 months and C-check of engine, replacement of Batteries, chemical cleaning of cooling tower etc Year 1 10,48,784.00 1048784.00

after one year.

Annual Service Contract of 3 Nos x 1010 KVA + 1 No x 750 KVA DG sets with AMF panel powered

with cummins diesel engines under 12 visit plant for one year.

Servicing, Overhauling , Healthiness Testing of 33 KV/.433 of 4 Nos x 2000 KVA Dry type Half

Transformers with all relevant servicing & testing as required for above transformers. yearly

Servicing , inspection, overhauling and protection testing of HT Panel 33 KVA breaker, isolator,

Relays etc. equipment including VCB.

7 2.7 Supply of T-5 fitting Tube light of 14 W of make philips or Equivalent. No. 2500 157.32 393294.00

8 2.8 Supply of T-5 fitting Choke of 14 W of make philips or Equivalent. No. 225 1,009.45 227127.29

9 2.9 Supply of CFL 865 13W two pin of make philips or Equivalent. No. 860 183.54 157841.99

Digitally14748.53

10 2.10 Supply of LED bulb 40W for Lamps. No. 90 163.87

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

11 2.11 Supply of Compound box PVC 8X3 of make Schneider or Equivalent. No. 60 157.32 9439.06

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

12 2.12 Supply of Compound box PVC 4X3 of make Schneider or Equivalent. No. 60 124.54 7472.59

13 2.13 Supply of Compound plate PVC 6 Module of make Schneider or Equivalent. No. 70 209.76 14682.98

14 2.14 Supply of Compound plate PVC 3 Module of make Schneider or Equivalent. No. 40 176.98 7079.29

15 2.15 Supply of CFL 865 18W two pin white of make philips or Equivalent. No. 25 235.98 5899.41

16 2.16 Supply of CFL 865 18W Four pin white of make philips. No. 30 262.20 7865.88

17 2.17 Supply of 6A switch of make Schneider or Equivalent. No. 210 117.99 24777.52

18 2.18 Supply of 16A switch of make Schneider or Equivalent. No. 150 183.54 27530.58

19 2.19 Supply of 6A socket of make Schneider or Equivalent. No. 85 183.54 15600.66

20 2.20 Supply of 16A socket of make Schneider or Equivalent. No. 150 262.20 39329.40

21 2.21 Supply of 6A Top of make Schneider or Equivalent. No. 50 65.55 3277.45

22 2.22 Supply of 16A Top of make Schneider or Equivalent. No. 35 91.77 3211.90

23 2.23 Supply of Panel Indicator lamp for pannel of RED, Yellow,Blue of make L & T. No. 10 288.42 2884.16

24 2.24 Supplyof 3 module Compound plate pvc No. 5 137.65 688.26

25 2.25 Supply of T-5 tube light 28W No. 30 131.10 3932.94

26 2.26 Supply of Tube light 36W No. 450 65.55 29497.05

28 2.28 Supply of Starter 36W No. 270 111.43 30086.99

29 2.29 Supply of 20W LED complete fitting No. 50 524.39 26219.60

30 2.30 Supply of cooper strip 50/6 No. 5 1,442.08 7210.39

31 2.31 Supply of cooper strip 25/5 No. 5 917.69 4588.43

32 2.32 Supply of Old Dhoti No. 110 52.44 5768.31

33 2.33 Supply of PVC tape (10x1box) Box 10 393.29 3932.94

34 2.34 Supply of Halogen tube 1000W No. 40 111.43 SINGH 4457.33

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

35 2.35 Supply of halogen holder No. 5 589.94 2949.71

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

37 2.37 Supply of capacitor rating 2.5 farad No. 5 39.33 196.65

38 2.38 Supply of capacitor rating 3.15 farad No. 5 45.88 229.42

39 2.39 Supply of RCCB 63 amp make Schneider or Equivalent. No. 5 5,243.92 26219.60

40 2.40 Supply of RCCB 40 amp make Schneider or Equivalent. No. 5 4,588.43 22942.15

41 2.41 Supply of MCB 10 amp make Schneider or Equivalent. No. 5 183.54 917.69

42 2.42 Supply of MCB 16 amp make Schneider or Equivalent. No. 5 183.54 917.69

43 2.43 Supply of High Pressure sodium lamp 70 W Model No. EE27200-250v make Phillips or Equivalent. No. 5 3,932.94 19664.70

44 2.44 Supply of High Pressure Mercury lamp 125 W Model No. HQL(MFB-U) make Osram. No. 1 3,670.74 3670.74

45 2.45 Supply of Bulb white thread 40W compac size make phillips or Equivalent. No. 5 163.87 819.36

46 2.46 Supply of Choke 70W Model No BSN070M363 make phillips or Equivalent. No. 5 1,835.37 9176.86

47 2.47 Supply of Bulb thread 125W Model No SON/T150V make phillips or Equivalent. No. 5 196.65 983.24

48 2.48 Supply of CFL 4 pin 36W PL-L4P make phillips or Equivalent. No. 5 262.20 1310.98

50 2.49 Supply of PVC insulated FRLS 4mm wire make polycab, Havels , finolex. (90 meter in 1 roll) Roll 5 4,981.72 24908.62

51 2.50 Supply of PVC insulated FRLS 2.5mm wiremake polycab, Havels , finolex.(90 meter in 1 roll) Roll 12 3,277.45 39329.40

52 2.51 Supply of PVC insulated FRLS 1.5mm wiremake polycab, Havels , finolex (90 meter in 1 roll) Roll 19 2,884.16 54798.96

53 2.52 Supply of PVC Batten 25mm No. 150 78.66 11798.82

54 2.53 Supply of PVC Batten 50mm No. 25 117.99 2949.71

55 2.54 Supply of Cable tie having 50 ties in one packet No. 2 262.20 524.39

56 2.55 Supply of complete halogen 1000W No. 5 1,573.18 7865.88

57 2.56 Supply of complete LED focus light 18w make phillips or Equivalent. No. 5 1,940.25 9701.25

59 2.57 Supply of CFL light (Simple holder) 18W make Osram. No. 2 196.65 SINGH 393.29

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

60 2.58 Supply of extension board of 4 shocket No. 1 852.14 852.14

61 2.59 Supply of LED bulb thread of 7W make Osram No. 50 117.99 5899.41

62 2.60 Supply of PVC insulated flexible 3 core 6sqmm copper wire m 210 262.20 55061.16

63 2.61 Supply of Red & Green Busy light with remote complete No. 5 2,621.96 13109.80

65 2.63 Supply of I O Box (PVC/GI) No. 100 308.08 30808.03

66 2.64 Supply of I O Face Plate No. 100 314.64 31463.52

67 2.65 Supply of RJ 45 Socket No. 500 11.80 5899.41

68 2.66 Supply of Jhalar lights all colours No. 100 196.65 19664.70

69 2.67 Supply of hepa filter of required sizes to be fixed in existing AHUs. No 50 3,932.94 196647.00

70 2.68 Supply of bollard LED light 9 watt No 22 2,359.76 51914.81

71 2.69 Supply of LED post top lantam No 5 4,719.53 23597.64

Grand Total inclusive GST ₹ 3,64,53,575.00

Grand Total inclusive GST ₹ 3,64,53,575.00