GE S U 49 2022 23 REPAIR TO BOUNDARY WALL DRAIN PATH CLEANING

Amount

Desluding/Dewatering of septic tank/ soakage wells/drain including inlet/out let chambers removing out all scum, silt residuals sludge (both) organic/ inorganic in nature) after plugging the incomming sewage lines through combined high pressure water jetting cum suction (vaccum) type machine mounted on LCV/HCV facility of high pressure vaccum and removing the same in the tank to a place outside MOD load meant for the purpose by local municipality complete all as specified and as directed.

Removal of blockage and cleaning of sewage lines of 75/100 mm bore by roding from manholes to manholes or manholes to cleaning eyes, taking out all debris, sludges and solid materials from sewage lines and removing out side MOD land not less than 1000 metres and well flushing with water complete all as specified and as directed.

All as per ser item No 2 but 150 mm bore complete all as specified and as directed.

All as per ser item No 2 but 200 mm bore complete all as specified and as directed.

Cleaning of cast iron pipes 100mm/75mm bore pipes by roddimg with jute bags and well flushing after cleaning complete all as specified and as directed.

Cleaning of man holes n.exc 1.5m deep and removing sludge/waste material to distance n.exc 500m and burying in pits and refilling the same complete all as specified and as directed.

All as per srl item No 6 above exceeding 1.5m deep and 3.0m deep complete all as specified and as directed.

Cleaning of floor traps and removing waste material etc to a distance not exceeding 50 m and burring in pits and re-filling the same complete all as specified and as directed.

Removal of blockage/waste and cleaning gully traps and Nahani traps of any description and size and waste material etc to a distance not exceeding 50 m and burrying in pits and re-filling the same complete all as specified and as directed.

Cleaning of blocked WC any type and removing waste material etc to a distance not exceeding 50m and burring in pits and re-filling the same complete all as specified and as directed.

Cleaning of shurbs/ bushes around septic tank, ,filter bed,manholes and along the sewage line etc complete all as specified and as directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5 m deep and getting out in any type of soil complete all as specified and as directed.

Excavation in trenches n exc 1.5m wide but exc 1.5 m deep and getting out in any type of soil complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers n exc 25cm thickness complete all as specified and as directed.

Removing excavated soil to a distance n exc 50m and depositing at a level n exc 1.5m above the starting point complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n.exc 15 cm thick below or above ground level complete all as specified and as directed.

PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as mass concrete and filling of foundation complete all as specified and as directed.

Demolition and breaking up drain pipes 100 mm dia (Salt glazed ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Demolition and breaking up drain pipes 150 mm dia ( Salt glazed ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Demolition and breaking up drain pipes 200 mm dia ( Salt glazed ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Demolition and breaking up drain pipes 300 mm dia (Salt glazed ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Salt glazed stone ware drain pipe 100mm bore in trenches and jointed complete all as specified and as directed.

Salt glazed stone ware drain pipe 150mm bore in trenches and jointed complete all as specified and as directed.

Salt glazed stone ware drain pipe 200mm bore in trenches and jointed complete all as specified and as directed.

Salt glazed stone ware drain pipe 300mm bore in trenches and jointed complete all as specified and as directed.

Cement Concrete 1:4:8 type C-2 (using 40mm graded crushed stone aggregates) as in bed to 100mm drain pies including packing under and haunching against the sides pipes after they are laid and tested for complete all as specified and as directed.

Cement Concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to 150mm drain pies including packing under and haunching against the sides pipes after they are laid and tested for complete all as specified and as directed.

Cement Concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to 200mm drain pies including packing under and haunching against the sides pipes after they are laid and tested for complete all as specified and as directed.

Cement Concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to 300mm drain pies including packing under and haunching against the sides pipes after they are laid and tested for complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per srl item No 31 here-in-above but except bricks complete all as specified and as directed.

Walling of random rubble masonary , rectangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed.

All as per Srl item No 33 here-in- above but except stone complete all as specified and as directed.

Taking down cement plaster on brick or stone masonry wall etc including racking out joints haking for key, scrubbing down with water etc as in external surfaces of man holes, septic tank, filter bed etc including removing of debrie complete all as specified and as directed.

Rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in manholes, septic tank, filter bed out let drain etc complete all as specified and as directed.

Flush pointing to squared rubble masonry coursed or uncoursed in CM (1:3) complete all as specified and as directed.

Extra over stone walling (sand stone) for hammer dressing with miximum depression on face from straight edge held against the dressed surface not exceeding 20mm to face stones (granite or trap stone) and dressing of face beds and joints, as specified or random rubble walling, uncoursed or brought upto courses complete all as specified and as directed.

Hand packing with broken stone or boulders (any thickness) at back of wall over arches etc and rising (or lowering) to the required level complete all as specified and as directed.

PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in coping ,benching and the like including form work complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling old serviceable/unserviceable barbed wire including removing of unserviceable barbed wire from site and serviceable materials kept in safe custody for re-use complete all as specified and as directed.

Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of post including securing and tying at crossing with and provision of galvanised mild steel wire staple or steel pins etc complete all as specified and as directed. (Each line wire to be mesured)

Fixing only old serviceable barbed wire complete all as specified and as directed.

Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe-290, Gde E-165 complete all as specified and as directed.

Mild steel conforming to grade Fe-165 (Fe-290) angle post or struts in fencing fixed independently including cutting and bending to shape as directed drilling holes, notching for wire etc. complete all as specified and as directed.

Applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer of any description over 10 cm in width or grith not otherwise described including preparation of new steel surfaces complete all as specified and as directed.

Applying one coat of synthetic enamel paint including preapration of old steel surfaces over 10 CM width or girth complete all as specified and as directed.

Dismantling chain link fencing any type complete all as specified and as directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out in soft and loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and as directed.

Supply only chain link M S galvanised fencing complete all as specified and as directed.

Fixing only chain link fencing including link wires, any mesh size and type to any type of standard rails straining bolts etc including provn of binding wire complete all as specified and as directed.

Demolation of reinforced cement concrete not exeeding 15cm thickness (below or above ground level) complete all as specified and as directed.

Reinforced cement concrete type B-1 (using 20mm graded crushed stone aggregates) work as in slabs supported on walls , beams etc complete all as specified and as directed.

RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) for precast cement concrete slabs as in manhole covers etc set in cement mortar 1:4 complete all as specified and as directed.

Form work to soffits of suspended slabs and similar work not exceeding 200mm thick complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over cut to length bent to shape required , including cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and as directed.

Cutting in to existing manholes for forming new drains and making good to pipe and making good to pipe and rendering, cutting out existing benching in cement concrete 1:2:4 type B1(in 1/2 or 3/4 round in section)and reforming benching as required for 150mm bore pipe complete all as specified and as directed.

PVC (SWR) junction double,(Single T), equal or unequal. 110 mm dia complete all as specified and as directed.

PVC (SWR) junction double,(double T), equal or unequal 110 mm dia with access door complete all as specified and as directed.

PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed.

CI floor trap with grating including jointing to waste pipe with dia of outlet 75mm in repair complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches/walls, if required of internal dia of pipe 50/75/100 mm complete all as specified and as directed.

Sand cast cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to wals bore of pipe 100mm dia complete all as specified and as directed.

Sand cast cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls bore of pipe 75mm dia complete all as specified and as directed.

CI bends diminishing pieces or tapers bore of pipe 100mm complete all as specified and as directed.

CI bends diminishing pieces or tapers bore of pipe 75mm complete all as specified and as directed.

CI branch pieces, single (equal or unequal) ordinary or inverted (size or socket type) or with parallel branches with oval access door bore of pipe 100mm complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Rendering 10 mm thick on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished even and fair complete all as specified and as directed.

300mm x 200mm x 7 mm thick coloured glazed ceramic tiles as in skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and as directed.

Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in sub base complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregates) 25 mm thick as in floor, complete all as specified and as directed.

Chequered cement concrete (glossy finish) tiles 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 20 mm thick screed bed cement mortar 1:6 complete all as specified and as directed.

Sand cushion 20 to 30mm thick for fixing of inter locking tiles complete all as specified and as directed.

Machine pressed precast concrete interlocking paver block (glossy finish)of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and no pigment, M-35 Grade of approved colour and design ISI Make by GE complete all as specified and as directed.

Vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440 mm white, with integral foot rests including a provision of concrete bedding but fixed in repair complete all as specified and as directed.

Cast iron 'P' or 'S' trap for bore of pipe 100mm complete all as specified and as directed.

PCC 1:5:10 type E-2 (using 40 mm graded brick aggregates) as in filling under sunken floors etc complete all as specified and as directed.

Demucking of filled earth soil in drains of any size, depth or section in condition as per site reuirement complete all as specified and as directed.

Punched tape concertina coil (including spike and handle) with 50 turns and 1050mm dia, width of barbed 9mm dia width of barbed 9mm and spacing of clips 23.5mm to 24.5mm c/c weight of coil will be 10 to 14 kg without packing. Coil length will be 6m when opened up etc complete all as specified and as directed.

Two coats cement base paint on new plastered surfaces including preparation of surfaces complete all as specified and as directed.

One coats cement base paint on old plastered surfaces including preparation of surfaces complete all as specified and as directed.

Providing precast cement concrete louvers jallies, 25 mm thick (measured solid), 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) including all mouldings set with CM (1:4) as in repairs complete all as specified and as directed.

Dura stone ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

PVC (SWR) pipes (110mm Dia) single socketed in any length with rubber joints laid in tranches, floor and similar work complete all as specified and as directed.

Dismantling post or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground, post embedded in natural ground complete all as specified and as directed.

Mild Steel Round bars 10mm dia and over, cut to length, bent to shape required, including bending,hooking ends, with mild steel wire not less than 0.9mm dia or securing with clips quality conforming to Fe-290 Gde E-165 as in chian link fencing complete all as specified and as directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed on the other or screwed both ends , each screwed ends to be fitted with washers and one hexagonal or square nut, length exc 5 cm but n exc 10 cm dia of neck 11 to 15mm complete all as specified and as directed.

Note : (a) Contractor representative/Engineer will report to NCSR complaint cell/concern JE daily in morning 0900 Hrs to collect complaint for routine/urgent work related to day to day maintenance till completion of contract. (b) All routine/urgent jobs received on docket slip be attended within 24 Hrs, if contractor not complete the complaints then he will be liable to charged penalty of Rs 450 per complaint per day.

khajuria builders

M/S ASHOK KUMAR PACHIALA

RAJ MOHD

VIRINDER SINGH

SINGH CONST CO

sohtra and co

VISHWANATH AND SONS

vmd traders

RAMAN CONSTRUCTION CO