E1-4493-2025-18-ECMC

Amount

Dismantling the existing damaged Pressed Tiles including all labour charges cost and conveyance of all materials to site etc., complete as per standard specification

Brick work in cement mortar 1:5 mix using (One cement and five sand) using best quality of country bricks of size(22cmx11cmx7cm) for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 80mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with M sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supplying and fixing of trusses using necessary 'L' angles 25mmx25mmx3mm size and I each according to design approved by the departmental officers including cutting, welding cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Supply and fixing of M.S. iron grill gate of required size and design approved by the departmental officers including cost of materials and labour charges including one coat of primer of red oxide etc., complete as per standard specification

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Plastering with cement mortar 1:5 mix (One cement and five sand) to 12mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Supplying and fixing in position of Indian mark glazed earthenware wash basin 22"x6" with a pair C.T.brackets12mm CP pillar, tail pieces, 32mm C.P.waste pipe rubber plug PVC (or) lead brass connections, 12mm PVC (or) lead bars connections, 12mm G.M.wheel valve, 12mm brass nipple and giving necessary connections including cost of white lead, teak wood, plug clamps, screws, rubber washers painting two coats of paint over lead pipe etc., complete

Supplying and fixing in position of EWC standard size colour glazed earthenware with cost of "P" trap and double flapped seat cover 10 lit. capacity P.V.C low level flush tank with connections etc., including all internal fitting on . Brackets 12mm PVC or brass nipple chromium plated brown headed stopcock 12mm nylon connection with necessary teak wood plugh clamps, screws to the portion coming with wall and floor, including dismantling masonery and redoing the same to the original condition complete as per standard specifications

Supplying and delivery of the following size of GI pipe and PVC pipes and specials including cutting threading and jointing with specials including cost of pipe and specials and including labour for cutting threading jointing etc., complete as per standard specification

25 mm dia G.I Pipe "B" Class

25mm dia G.I Elbow

25mm dia G.I TEE

25 mm dia G.I Pipe "B" Class

20mmx15mm GI Reduser

15mm GI Elbow

15mm Tap

25mm GM Gate Value

2000 Lit PVC Water Tank

15mm dia CP Screw down Tap

Supply and Fixing of Soild PVC door shutter using 19Gauge 19mm MS Sq tubes for styles and outer frames,15mm MS Sq. tubes for top, lock and bottam rails. The steel tubes shall be coverd with 5mm thick soild PVC sheets, Shutter using 5mm thick soild PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail, lock rail and bottam rail shall be 75mmx30mm. The Over all size of frames shall be 50mmx45mm, with suitable rabate for housing the shutter.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Finishing the top with one course Solar Reflective ceramic tiles (colour and shade as directed by the Departmental officer) of size 305 mm x 305mm x 7 mm thick of approved quality set in cement mortor 1:3 to (one cement and three M sand ) 12 thick and mixed with for 10M2/4.00kg of Epoxy packing conforming to iss including curing etc., complete complying with standard specification and as directed by the Departmental officers ( The Quality of solar reflective ceramic tiles should be got approved by departmental officers before use on work)

Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wireconnection of 14 SWG wire for open Light point/fan point (5 points per coil) [ SD No. 21 ]

Supplying and fixing of water tight Bulk head fitting with guard (Philips/bajaj/crompton/Klite) suitable for incandescent lamp and 60W bulb.[SD 83]

Supply and fixing in position of 110mm dia PVC rainwater downfall pipe with necessary PVC shoe, PVC bend, TW plug, CI clamps including all labour charges cost and conveyance of all materials to site etc., complete as per standard specification - 3 Rm

Supply and fixing of single box type 4'-36W flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of Tube Light [SD 87 ]

Painting with cement paint of approved colour and best quality of Weater sheild paint over new plastered surface including cleaning the surface curing complete including cost of all materials and labour etc., complete

Painting two coats with best approved enamel paint over new iron work including cleaning the surface including cost of all materials and labour charges etc., complete as per standard specification

SRI MALAIYAMMAN & CO (BID ID -1437133)