Construction of New Town Police Station building with development works at PARAMAKUDI in Ramanathapuram District

Amount

1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

1.8) Earth work excavation for Open foundation in Soft disintegrated rock (excluding refilling) a. 0 to 2 mt.

2.6) Supplying and filling with 40mm HBSJ

2.7) Supplying and filling with 20mm HBSJ

7.2) Supplying and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1) Filling with excavated earth

21.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m

b. T.W. below 2.00 m length.

23.3) Supplying and fixing of Magnetic door catches

24) Manufacturing & supply of steel windows (weight basis)

25) Supplying and fixing of MS hold fast

30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

37.1) White washing 3 coats (slaked)

39) Supplying and fixing of MS Grills in position

40) Painting 2 coats - New "wood work"

41) Painting 2 coats - New "iron work"

47) Supplying and fixing of Alu. Towel rail 75 cm long

48) Supplying and fixing of 5 pin Coat stand

49) Supplying and fixing of Chromium plated 8 gauge picture hook

50.3) Supplying and planting avenue trees

50.4) Providing Tree guard

52) Supplying, laying, fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 including the cost of suitable PVC/GI/GM specials a. 32 mm dia

b. 25 mm dia

53.3) Supplying and fixing of C.I. steps (5 Kg)

61.2) Supplying and laying and loose jointing the following dia stone ware pipes a) 100mm dia Stone ware pipe

62.2) Supplying and fixing of the following dia stone ware Tee a) 100mm dia Stone ware Tee

Electrical arrangements 69) Supplying and fixing of 15 Amps 3 pin Power plug socket

72) Supplying and fixing of Box type Fibre Fan hook

73.1) Supplying and fixing of 3 phase Distribution board with 6 way per phase 32A per way with neutral link

74) Charges for assembling and fixing of ceiling "Fan"

76) Supplying and fixing of 8 SWG G.I. wire

77.3) Supplying and fixing of TV/Telephone line Socket

77.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line

78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)

86) Providing Pre-constructional Anti termite treatment

Annexure 2.1.1) Supplying and filling the Foundation and basement with gravel

2.1.3) Supplying and filling in foundation and basement with Crushed stone sand

3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand with Admixture

3.3.1) P.C.C. 1:8:16 using 20 mm broken brick jelly using crushed stone sand

3.10.1) P.C.C. 1:3:6 for vertical wall with 20mm HBG Metal using crushed stone sand for foundation and basement

4.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Foundation and basement

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Ground Floor

b. In First Floor

c. In Second Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture a. In Ground Floor

b. In First Floor

c. In Second Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") 70 mm tk using crushed stone sand with Admixture (B.P.) a. In Ground Floor

b. In First Floor

14.2.2) Precast Cupboard slab 20mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 20mm thick a. In Ground floor

b. In First floor

14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 40mm thick a. In Foundation & Basement

18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c. For Square and rectangular columns and small quantities

d. For Vertical wall

f. For Curved Surface

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

21.6.2) R.C.C. Door frames of size 100x75mm with one edge grooves size 't' x 20mm using standardised concrete mix M 20 Grade using crushed stone sand with Admixture a. 1200 x 2100mm

22.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws

23.1.1) T.W.single leaf door shutter using 9mm thick phenol bonded BWR grade plywood with brass screws. Suitable for door of size a. 1200 x 2100mm

23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings

23.5) Supplying and fixing of door with Iron bar & M.S Flat for the door Shutter (Lockup) a.1000 x 2100 mm

24.1.1) Supplying and fixing of ventilator with iron bars and MS flats (Lock up) a) V-1350 x 600mm

26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand with Admixture

35.1.1) Plastering in CM 1:3, 12 mm tk. with Admixture and mixed with WPC using crushed stone sand

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture a. 150 mm wide Border

b. 75 mm wide Border

c. 50 mm wide Border

38.4.2) Providing two coats of wall putty for new plastered surface

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M20 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit

b) Augering 30cm dia

44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450x300x150 mm using crushed stone sand

50.5.1) Supplying fabricating and erection of M.S Scheme name board using crushed stone sand with Admixture

50.6.1) Precast slab 50 mm tk.in C.C.1:3:6 mixed with fibre using crushed stone sand

51.1) Supplying and fixing of HDPE water tank 700 lit capacity with ISI mark

52.4) Supplying laying fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTM pipe (fully consealed in walls) with necessary PVC/GI/GM specials c. 20mm dia

53.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)

53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")

54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)

54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

59.5.2) Supplying and fixing of Gully Trap using crushed stone sand

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

b) 160mm dia UPVC Non Pressure pipe

62.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC as per IS 10124/1982 Part II a) 110mm dia PVC Bend

b) 160mm dia PVC Bend

62.2.1) Supplying and fixing of PVC Equal Tee (mould) BIS 7834/1975 as per IS 10124/1982 Part-II a) 110mm dia PVC Equal Tee

b) 160mm dia PVC Equal Tee

64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose with bakelite battern holder

c. Calling bell point with Buzzer/Calling bell

65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan Point

66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself

68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places

71.2) Supplying and fixing of 32 Amps triple pole main switch

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed

79.2.1) Supplying and fixing of 3 Nos. of 32 Amps Fuse Unit

84.4) Run of Main 4 wires of 4 Sqmm PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.2) Supplying, fixing, connecting and commissioning of 20 Amps Metal clad switch for Air conditioner (Superior variety)

99) T.W.double leaves Panelled door shutter with brass fittings Suitable for door of size a. 1800 x 2100mm

100) Supplying and fixing of 9 watts LED Bulb

101) Supplying and fixing of 25 watts LED with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light fittings

103.1) Supplying and fixing of Bulk Head fitting suitable for 15 watts LED bulb

104.1) Supplying and fixing of 15 watts LED bulb

114) Supplying and delivery of following PVC Aluminium armoured LTUG cable a) 3.5 core 35 Sqmm PVC Aluminium armoured LTUG cable

117) Supplying and fixing of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable a) 3.5 core 35 Sqmm brass cable gland

117.1) Supplying and fixing of PVC cable end Termination (Crimping Lugs) suitable for following PVC Aluminium Armoured LTUG cable a) PVC cable end Termination (Crimping Lugs) for 3.5 core 35 Sqmm. Aluminium Armoured LTUG cable

119) Supplying and delivery of 2 HP clear water vertical wet type three phase submersible pumpset suitable for borewell Duty - 50 lpm x 75 m

119.1) Supplying and delivery of 2 HP open well submersible pumpset Duty - 50 lpm x 60 m

120) Labour charges for erection of submersible pumpset in borewell / openwell upto 5 HP

121.1) Supplying and fixing of MS fabricated DOL 2 HP panel board of wall mounting type with ISI mark with Ammeter, Voltmeter indicating lamps

121.2) Supply and fixing of Panel control board for 2 HP openwell submersible motor with two level

122) Supplying and fixing of following dia of the PVC, GI & GM specials a) 80mm dia GI Elbow

b) 80mm dia GI Hex Nipple

c) 80 mm dia GI Union

d) 50 x 32mm dia GI Reducer

e) 50 mm dia GI Elbow

f) 50 mm dia GI Hex Nipple

g) 50 mm dia GI Union

h) 50mm dia GI Bend

i) 50mm dia GI Tee

j) 50mm dia GI Coupling

k) 80 mm dia GM Non return valve

l) 50 mm dia GM Non return valve

m) 80 mm dia GM Gate valve

n) 50 mm dia GM Gate valve

o) 32 mm dia GM Gate valve

p) 63 mm dia PVC Elbow

q) 63 mm dia PVC Tee

r) 50 mm dia PVC Tee

s) 50 mm dia PVC Elbow

t) 63 x 50 mm dia PVC Reducer

u) 50 x 40 mm dia PVC Reducer

v) 80 mm dia GI Bend

w) 80 mm dia GI Coupling

123) Supplying and Delivery of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable for submersible pumpset

124) Supplying and laying of following dia GI pipes 'B' class in position a) 80mm dia GI pipe

b) 50mm dia GI pipe

c) 32mm dia GI pipe

124.1) Supplying and laying of following dia GI pipe B class with ISI mark for including cost of clamping and labour charges, fixing GI pipes, GI specials etc., all complete (Below Ground level) a) 80mm dia GI pipe

125) Supplying and delivery of following dia PVC pipe a) 63mm dia PVC pipe/10 Kg/cm2

b) 50mm dia PVC pipe/10 Kg/cm2

125.1) Supplying and fixing of following dia UPVC pipe a) 32mm dia UPVC pipe

126.1) Supplying and fixing of following dia M.S. Clamp set a) 150 mm dia MS clamp set

127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump

129.1) Supplying and fixing in position of following size of Stainless steel TNPHC Emblem a) 15" height TNPHC Emblem

130) Supplying and fixing of following size of Aluminium dye casting letters with MRF powder coating a) Aluminium dye casting letter 9" dia

132.1) Charges for developing the Borewell with Air compressor of 600 CFM capacity (Minimum 8 Hrs)

132.2) Drilling of borewells any where in Tamilnadu including Transporation from one place to another within Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebble boulders etc., by first taking a pilot bore 140mm/150mm dia and them enlarging to required dia direct or reverse rotary mud circulance method using rotary rings, fuel, labour and drilling at site a) Upto 60m depth ending below Ground Level

b) From 60m depth upto 90m depth ending below ground level

132.3) Reaming of 140/150 mm dia pilot bore to 300mm dia bore a) Upto 60m depth ending below ground level

b) From 60m depth and upto 90m depth ending below ground level

133) Supplying and delivery of following dia PVC casing pipes suitable for 150mm dia borewell a) 150mm dia PVC Casing Pipe (Casing Shallow Depth) upto 80m

b) 150mm dia PVC Casing Pipe (Casing Medium depth) (upto 81 to 110m)

133.1) Labour charges for inserting 150mm dia PVC casing pipe assembly (with slots or without slots) in the drilled hole including jointing the Pipes with PVC couplers with cement paste etc., complete

134) Supplying and fixing of 160mm dia PVC end cap for borewell

154) Supplying and fixing of TNEB Meter Board suitable for 3 Phase 63A service connection

164) Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade stainless steel pipe of 1.60mm thick

344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm

361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick

367) Providing wooden melamine polish for main door new wood work

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

379.5.1) Supplying and laying of Granite tiles flooring of size 2'x1', 10mm tk (Ruby red) over cement plastering in CM 1:3 20mm thick using crushed stone sand

448.2) Supplying and fixing of PVC Tee with end cap of 32mm dia

796) Two coat of Exterior emulsion paint including primer for outer wall

796.1) Two coat of Plastic emulsion paint including primer

A VELANI

siva constructions

Senthilkumar.N

Balraj Contractor