EXTENSIVE, B/R REPAIRS WORK AT SELECTION CENTRE EAST AND ENGINEER PARK MD ACCN AT TARAPORE ROAD, FD REGT AND FASF UNDER AGE B/R-I AT NEW CANTT PRAYAGRAJ.

Amount

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description exc 1.0 sqm but not exc 2.0 Sqm each and removing from site complete all as specified.

S&F MS framed work as in doors frame,doors or gates of angle iron,door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc. to prepared for hanging or sliding with including either hooks and hinges, also fastening and fixing and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for 30 mm thick flush shutters with block board core & plywood face panels commercial type on both face complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24(a) and for door and fixed with chowkats,chemically pressure treated complete all as specified and directed.

S&F Providing and fixing factory made UPVC white colour Sliding window (Area not exceeding 2.00 sqm each) Three track made of extruded profiles with wall thickness of 2.3mm (+ / - 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+/- 0.2mm thick galvanised steel Frame (30mm x 18mm) 2 Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories as per manufacturer's specification complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

S&F factory made solid PVC door frame of size 50 mm x 95 mm made out of 5 mm wood grained printed colour PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheet complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with partical board core (stile:), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front Face & 2 mm Plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

Dismantaling of old unserviceable hinge / tower bolt / handle / sliding bolt and other doors or window fittings as required for replacement complete all as specified and directed.

S&F 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.

S&F 150mm long aluminium alloy floor door stopper ,fabricated type complete all as specified and directed.

S&F in repair aluminium door strip with brush fixed as in door bottom fixed with nails or screw complete all as specified and directed.

Dismantling timber framed work as in fillets, rails, post, rafters purlins, etc under 40 sqm in section complete all as specified and directed.

S&F plain fillets, square, rectangular or triangular in section clean sawn secured with nails or brads 2nd class hard wood, sectional area exc 3 Sqcm but not exc 6 Sqcm complete all as specified and directed.

S&F plain fillets, square, rectangular or triangular in section clean sawn secured with nails or brads 2nd class hard wood, sectional area exc 13 Sqcm but not exc 25 Sqcm complete all as specified and directed.

S&F including fabrication of framed work such as in grills, grating ,hold fast of door and window chowkat etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors, and similar work conforming toFe 290 Gde-E-165 complete all as specified and directed

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm for new door / window shutter complete all as specified and directed.

Hacking out old broken glasses of any thickness size & quality from wooden or steel window glazed with putty or fixed with beads including punching or drilling out old glazing pins/clips etc complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.

S&F 4.8mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed.

S&F 3mm thick figured glass pin head type in square n.exc 0.5 Sqm in each pane new ventilator / window shutter complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F 30mm width of flaps continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F 100 mm hasp & staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L for brickwork with sub class 'B' bricks (old size), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size) straight or curved on any radius built in CM 1:4 in half brick thick walls complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or stone walls finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surface finished even & smooth without using extra cement complete all as specified.

M&L for rendering 5mm thick in CM 1:3 on ceiling surfaces of RCC or brick surface finished even & smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete( unreinforced) including floor tiles or stone floor in any description and any position etc removal from site and complete all as specified and directed

Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick plain cement concrete type B1 1:2:4 (20mm graded crushed stone aggregate) as in levelling course on floor and other similar works complete all as specified and directed.

M&L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06sqm but n exc 0.11 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface laid over & including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) as in skirting /dado etc with and including 10 mm thick rendering in cement mortar 1:4 on wall complete all as specified and directed.

M&L for vitrified dark shade (double charged/wooden look) floor tiles (scratch free) 10mm thick (square/ rectangular) area of each tile not exc 0.36 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for vitrified dark shade (double charged/wooden look) floor tiles (scratch free) 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface laid over & including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for vitrified dark shade (double charged/wooden look) floor tiles (scratch free) 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface laid over & including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for vitrified dark shade (double charged/wooden look) vertical tiles (scratch free) 10mm thick (square/ rectangular) as in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement match fixed with and including 10 mm thick rendering in cement mortar 1:4 on wall complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450mm X 300mm X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified.

M&L for 18 to 20 mm thick machine cut kota stone flooring ,laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing finished laid over and including 20 mm thick screed bed or bedding layer in CM (1:6) complete in repairs all as specified and directed.

M&L for Makrana white marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and with 15 mm thick screed bedding in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete in repairs all as specified and as directed.

M&L for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and with 10 mm thick plastering in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types finished complete in repairs all as specified and as directed.

M&L for 18 to 20 mm thick machine cut kota stone as in riser of step,dado and skirting fixed over and including 10 mm thick 1:4 CM backing on vertical surface of wall with rubbing and mirror polishing finished complete in repairs all as specified and as directed.

M&L for rubbing & polishing of existing kota stone or mosaic flooring complete all as specified and directed.

M&L for vitrified pavement outdoor tiles of 300mm X 300mm X 10mm thick coloured for floor /pavement etc and jointed in solvent and pointed in coloured cement to match the tiles including 15mm thick screed bed or bedding layer ie. cement mortar (1:6) complete all as specified and as directed.

M&L for 60 mm thick M-35 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over and including 25 mm thick sand cushioning and joints filling with sand complete all as specified and directed.

M&L for 80 mm thick M-40 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over and including 25 mm thick sand cushioning and joints filling with sand complete all as specified and directed.

M&L 40 mm thick PCC flooring type B1 (1:2:4) (using 20 mm graded crushed stone aggregate) with even and smooth surface by using extra cement and with insertion of glass dividing strips complete all as specified and directed. Note :- Glass dividing strip shall be measured and paid separately

S&F 3mm X 38 mm size glass dividing strips fixed in floor complete all as specified and directed.

M&L for 18 to 20 mm thick red or black granite work (table rubbed and polished) in cooking platforms and similar works laid with screed bed 15 mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite in repairs complete all as specified.

M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing, sub base etc complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints etc complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B2 using 40 mm graded crushed stone aggregate as in channel or surface drain including forming and finishing with extra cement including taking down existing concrete complete all as specified and directed.

M&L RCC type B-1 1:2:4 using 20mm graded crushed stone aggregate as in kitchen shelves etc including demolation of old slab complete all as specified and directed.

M&L for form work to suspended slab as in kitchen shelves etc not exceeding 200 mm thick for rough finished surface of concrete complete all as specified and directed.

M&L TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition of plain cement concrete in any position including tar felt & cement mortar bedding etc from roof or sunken complete all as specified and directed.

Complete removal of mud phuska from roofs of any thickness and removing the waste material from site to a distance exc. 250m but not exc. 500m and deposited where directed including cleaning of surface complete all as specified and directed.

Dismantaling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) as in roof padding,roof kerbs, benching on roof slab and other similar works laid as per slop required finished even and fair complete all as specified and directed.

M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed.

Cleaning the dust,durt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed.

M&L for Laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm side lap and 150mm end overlap,sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and directed. (Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.)

Supply only Liquid water proofing admixture (ISI marked) complete all as specified and directed.

M&L for 40mm thick brick tiles laid over and including 15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed.

Refixing of 40mm thick brick tiles ( obtanied from Item No. 70) laid over and including 15 mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement or as per manufacturer's instruction and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed.

M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm on water proofing treatment with preparation of surface as on non assesible area complete all as specified and directed.

M&L for Sunken floor treatment as in following sequence:- (a) The surface of Sunken floor is to be properly cleaning the dust,durt and any other foreign material,fungus moss etc from the surface. (b) M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of sunken area when concrete is green. (c) Applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986. (d) M&L for APP based polymeric water proofing membrane of 3mm thick (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm ie overlap and 150mm end overlap,sealing all overlaps including at all junction and corners with bonded to the surface by fusing and bonding torchon method complete all as specified and directed.

M&L for cement concrete 1:5:10,type E2 (40 mm graded aggregate) as in sunken filling and mass concrete works complete all as specified and directed.

M&L for 40 mm bore galvanised steel tubes 'medium grade' as in sunken spout pipe complete all as specified and directed.

M&L for Disconnecting existing water tanks, 500 to 1000 ltrs setting aside (or lowering if required) and hoisting, reconnecting and re-fixing in same position after cleaning complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) three layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank of capacity 1000 ltr (Cylindrical/vertical with closed top) three layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.

S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed.

S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts,plastic water closet white. seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580mm x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.

S&F in repair vitreous china wash and basin with pedestal, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting,pipe and union complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S&F in repair vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling, CP urinal spredar with CP pipe up to angle cock, waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed.

S&F in repair PVC connection 450 mm long, 15 mm size with brass chromium plated nuts complete all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning for refixing complete all as specified and as directed

Refixing old 15 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) with all fittings required complete all as specified and as directed.

S&F 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning for refixing complete all as specified and as directed

Refixing old 20 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) with all fittings required complete all as specified and as directed

S&F 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore chromium plated fancy type stop valves with long shanks fixed with 15 mm dia bore pipes complete all as specified and directed.

S&F in repair CP angle stop cock/valve of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed..

S&F in repair 15 mm bore CP central hole basin mixer (swan neck/head type) with regular spout fancy type, cast copper alloy with capstan heads,long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

S&F in repairs Pillar tap 15mm bore, cast copper alloy,with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair 20mm bore dia stop valve cast copper alloy screwed down , high pressure with crutch or butter fly handle ,screwed both ends for pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore CP fancy stop valve (concealed type) with long shanks and cup fixed with pipes complete all as specified and directed.

S&F in repair for 125 mm size fancy type chromium plated shower rose with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed.

S&F in repair CP urinal spreader with CP connection pipe complete all as specified and directed.

S&F in repairs 600mmx1500mm bevelled circular edge mirror of 5mm thick toughened glass mounted on 6mm thick AC building board or commercial plywood and fixed with chromium plated brass screws and cups washer complete all as specified and directed.

S&F in repairs 600mmx900mm bevelled circular edge mirror of 5mm thick toughened glass mounted on 6mm thick AC building board or commercial plywood and fixed with chromium plated brass screws and cups washer complete all as specified and directed.

S&F in repairs Stainless steel grating dome 100 mm dia with or without waste holes as required complete all as specified and directed.

S&F in repair brass CP health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and directed.

S&F in repair brass CP flushing jet spray for pedestal pattern EWC including 1.00 m long flexible pipe and brass chromium plated nuts complete all as specified and directed.

S&F in repair 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm white in colour fixed in repairs to walls or laid in floors including all fittings such as bend, elbow, tee etc. complete all as specified and directed.

S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side end caps and fixing bracked complete all as specified and directed.

S&F in repair stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets and connecting union or waste fitting to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of 900 mm X 1200 mm size (Min weight 4.50 Kg) of thickness 0.85 mm complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trenches complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trences complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.

Dismantling mild steel work of any description in any position complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.

S&F 6mm thick asbestos cement one-piece plain angular ridge fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Dismantling of old CGI sheet (corrugated, semi corrugated etc) from roof coverings including ridges of any type & any description complete all as specified and directed.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting (CGI) with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts with grade of zinc coating 275 etc complete all as specified and directed.

S&F 0.50 thick (including coated thickness) pre-colour, pre-profiled corrugated (Galvalume/Zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed.

S&F 0.50 thick (including coated thickness) pre-colour, plain type sheet (Galvalume/Zinkalume) any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,used as in ridge fixed with self tapping screws all as per manufacturer/profile maker instruction complete all as specified and directed.

M&L for steel work in square or rectangular hollow section used as in purlins, rafter, column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc. using induction butt welded tubes conforming to IS-4923-1997 grade Yst-310 complete all as specified and directed.

S&F in repair powder coated GI ceiling suspension system false ceiling grid of 600x 600mm size and 0.30 mm thick (MS galvanized (PPP CGS)) with main tee, cross tee and wall angle grid hanging with 4mm dia Gl wire and roof fasteners or butterfly clips etc complete all as specified and directed.

S&F in repair Wall mixer with provision for overhead shower with 115 mm bend pipe on upper side,connecting legs and wall flanges complete all as specified and directed. Make : Jaquar cat part COP -273PM or equivalent in make Cera / Hindware

S&F for corner glass self (with bracket) complete all as specified and directed. Make : Jaquar Cat part ACN-CHR-1173 or equivalent in Cera/Hindware

S&F for shower arm 20 mm dia and 450 mm long round shape with 90 degree bend for wall mounted shower with flange complete all as specified and directed . Make : Jaquar Cat part SHA-CHR-479L450 or equivalent in Cera/Hindware

S&F for waste coupling 32mm size full thread with (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60ms) complete all as specified and directed.

S&F for vitreous china wash and basin thin rim table top basin of size 415mm x 415mm x 145mm shape round complete all as specified and directed. Make : Jaquar Cat part OPS-WHT-15905 or equivalent in Cera/Hindware

S&F for waste coupling 32mm size full thread with 130mm height complete all as specified and directed. Make : Jaquar Cat part ALD-CHR-705L130 or equivalent in Cera/Hindware

S&F for bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed. Make : Jaquar Cat part ALD-CHR-769L300X190 or equivalent in Cera/Hindware

S&F for Maze overhead shower 200 mm round shape single flow (body & face plate SS with chrome finish) with rubit cleaning systemcomplete all as specified and directed. Make : Jaquar Cat part OHS-CHR-1613 or equivalent in Cera/Hindware

S&F for cistern with frame complete s per manufacter instruction including all necessary accessories all as specified and directed. Make :Jaquar Cat part JCS-WHT-2400FS or equivalent in Cera/Hindware

S&F for cistern with plate complete as per manufacter instruction including all necessary accessoriesall as specified and directed. Make :Jaquar Cat part JCP-CHR-352415 or equivalent in Cera/Hindware

S&F for Wall hung western closet complete as per manufacter instruction including all necessary accessories all as specified and directed. Make :Jaquar Cat part ARS-WHT-39953BIUFSM or equivalent in Cera/Hindware

S&F for concealed body for 3-inlet single lever diverter with button assembly ,cartridge sleeve but w/o exposed parts complete all as specified and directed. Make :Jaquar Cat part ALD-CHR-193 or equivalent in Cera/Hindware

S&F for single lever exposed parts kit of HI-FLOW diverter consisting of operating lever cartridge sleeve wall flange (with seals)button assembly sleeve & button (compatible with ALD-079N) complete all as specified and directed. Make :Jaquar Cat part OPP-CHR-15079NKPM or equivalent in Cera/Hindware

S&F for opal prime bath tub spout with wall flange complete all as specified and directed. Make :Jaquar Cat part SPJ-CHR-15429PM or equivalent in Cera/Hindware

S&F for Pillar taps, swan neck fancy type cast copper alloy, with capstan heads, chromium plated,Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. Make :Jaquar Cat part OPP-CHR-15005BPM or equivalent in Cera/Hindware

S&F for angular stop cock with wall flange complete all as specified and directed. Make :Jaquar Cat part OPP-CHR-15053PM or equivalent in Cera/Hindware

S&F for frameless swivel mirror complete all as specified and directed. Make :Jaquar Cat part ACN-CHR-1195N or equivalent in Cera/Hindware

S&F for towel ring complete all as specified and directed. Make :Jaquar Cat part ACN-CHR-1195N or equivalent in Cera/Hindware

S&F in repair 4 mm thick non asbestos fiber cement building board of 600x600 mm in size (HPSC E-classic) decorative finish fixed to aluminum /CGI frame work with hold down clips in false ceiling complete all as specified and as directed.

S&F for two way bib cock with wall flange complete all as specified and directed. Make : Jaquar cat part KUP-CHR-35041PM or equivalent in Cera/Hindware

S&F for hand shower (health faucet) with 8mm dia 1.2 m long flexible tube and wall hook complete all as specified and directed. Make : Jaquar cat part ALD-CHR-573 or equivalent in Cera/Hindware

S&F for toilet paper holder with flap complete all as specified and directed. Make : Jaquar cat part AQN-CHR-7753 or equivalent in Cera/Hindware

S&F iin repair 16mm thick ceiling board (acoustical tegular ) 600x600 mm in size, fixed on Aluminium or GI snap grid complete all as specified and directed.

S&F for 25 mm thick bonded mineral wool blankets slab made from rock, density 48 kg/cum and fixed as per manufacturer’s instructions complete all as specified and diretced

S&F for 18 mm thick 100% Solid PVC Laminated Board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/Cum having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter complete all as per specified and directed. Note : Material test certificate and authentication should be provided by the manufacturing company.

S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as per specified and directed. Make; (Hettich, Cat part No.9281432 or any other equivalent approved make )

S&F of stainless steel handles 138 mm size for kitchen cabinet shutters complete all as per specified and directed. Make: (Hettich, Cat part No.9113468 or any other equivalent approved make)

Dismantaling of old existing aluminium Doors /windows/wall partations of any type and in any size complete all as specified and directed.

S&F fabricating anodized aluminium frame work,door shutter ,windows, partisions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall /ceiling columns/beams etc complete all as specified and directed.

S&F powder coated aluminium anodised grills of bar size 6mm x 5 mm with square gap of size 75mm fixed with suitable aluminium channel of size 12-15 mm section complete all as specified and directed .

S&F in double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed .

S&F in repair aluminium (extruded section) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed .

S&F in repair 75 mm size 4 levers aluminium mortice lock, vertical type complete all as specified and directed .

S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed .

S&F in repair 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed .

S&F in repair solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet includsive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed .

S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed .

M&L for wall cladding tiles sizes 300 mm x 600 mm x 7-8 mm thick designer type coloured for wall etc set & jointed in cement and pointed in coloured cement to match the shade of tile laid over and including 15 mm thick rendering in CM(1:4) on brick work or concrete surface on wall and finished the even and fair to receive tiles complete all as specified and directed.

S&F in repair aluminium composite panel sheet 3 mm thick PVCF of brand name GURIND/ALSTRONG fixed with necessary aluminium tube with required silicon & screw as in ceilling/columns and in vertical surface complete all as specified and directed.

S&F in repair Stainless steel letters 450 mm height and 32 mm depth made of 1 mm thick stainless sheet with seemless welding rubbed polished and edges made smooth with necessary fixing devices complete all as specified and directed

S&F 12 mm thick tuffened glass door with suitable locking arrangement with lock (Godrej/link) 6 lever and self closing devices with rebates including jointing cleats of suitable section for fixing builders hard ware fittings door spring (Make Sandhoo/Samrat) with two Nos decorative type aluminium handle of 200 mm dia complete all as specified and directed .

S&F in repair sheet glass shelf assembly 60cm long, 12cm wide, made out of 5.5 mm thick glass with CP bracket guard and railing, fancy type, fixed to plug with CP screws and cup washer complete all as specified and directed.

Preparation of old decorated surface of walls by scrapping tools/electric hand grinder and applying one coat of white wash on wall with paint sprayer machine complete all as specified and directed .

Preparation of old decorated surface of ceiling by scrapping tools/electric hand grinder and applying one coat of white wash on ceiling with paint sprayer machine complete all specified and as directed.

Complete removal of existing treatment on wall of old plaster surface by scrapping tools/electric hand grinderand applying two coats of cement base paint with paint sprayer machine complete all as specified and directed.

Complete removal of existing treatment on wall of old plaster surface by scrapping tools/electric hand grinder and applying one coat of oil bound distemper white or tinted with paint sprayer machine over 1mm thick wall care birla putty complete all as specified and directed.

Complete removal of existing treatment on wall of old decorated surfaces by scrapping tools/electric hand grinder and applying two coats of oil bound distemper white or tinted with paint sprayer machine with 1mm thick one or two coat of wall care putty complete all as specified and directed.

Preparation of old decorated wall surface by scrapping tools/electric hand grinder and applying one coats of internal plastic emulsion paint white or tinted with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete all as specified and directed.

Complete removal of existing treatment of wall of old decorated surface of external wall by scrapping tools/electric hand grinder and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall or facia with paint sprayer machine over a coat or two coat of 1 mm thick wall care putty etc complete all as specified and directed.

M&L Preparation of old painted surface of wooden work by scrapping tools/electric hand grinder and applying one coat of synthetic enamel paint vwith paint sprayer machine on surfaces of any description exc 10 cm width or girth complete all as specified and directed.

M&L Preparation of old painted surface of steel surfaces (previously decorated) painting with one coat of synthetic enamel paint with paint sprayer machine on old steel surfaces for grills, guard bars ,shutters etc of any description exc 10mm width or girth complete all as specified and directed.

Preparation of newly plaster surface of wall and applying two coats of oil bound distemper with paint sprayer machine over a coat or two coat of wall care 1mm thick putty complete all as specified and directed.

Preparation of newly plaster surface of wall and applying two coats of cement base paint including one coat of primer with paint sprayer machine complete all as specified and directed.

Preparation of newly plaster surface of ceiling and applying two coats of white wash with paint sprayer machine complete all as specified and directed.

Preparation of newly plaster surface of wall and applying two coats of white wash with paint sprayer machine complete all as specified and directed.

M&L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer with paint sprayer machine, complete all as specified and directed.

M&L for Preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer with paint sprayer machine complete all as specified and directed.

Perfect Enterprises (BID ID -3079362)

Channa Brothers and Co. (BID ID -3066182)

R.K.ASSOCIATES (BID ID -3065792)

M/S A P CONSTRUCTION (BID ID -3061462)