Loading…
Loading…
Tender ID
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-Finance | L1 | Accepted-Finance All the documents required as per NIT have been uploaded by the Bidder successfully. | |
| 2 | L2₹1.8 L+₹2,393.33 (1.35%)Accepted-Finance | L2 | Accepted-Finance All the documents required as per NIT have been uploaded by the Bidder successfully. | |
| 3 | L2₹1.8 L+₹2,393.33 (1.35%)Accepted-Finance | L2 | Accepted-Finance All the documents required as per NIT have been uploaded by the Bidder successfully. | |
| 4 | L3₹2.0 L+₹21,539.94 (12.2%)Accepted-Finance | L3 | Accepted-Finance All the documents required as per NIT have been uploaded by the Bidder successfully. | |
| 5 | L4₹2.0 L+₹26,326.60 (14.9%)Accepted-Finance | L4 | Accepted-Finance All the documents required as per NIT have been uploaded by the Bidder successfully. |
Tender Value
₹2.4 L
EMD Value
₹4,760
Closing Date
27 Jan 2026, 4:00 pmClosed
Executive Engineer RandB Division Bandipora
Office of Xen RandB Division Bandipora
Construction of 01 Boys Toilet at Govt. Middle School Watapora Payeen Zone Quilmuqam District Bandipora
2026_PWDJK_300958_3
e NIT No.84 of 2025-26 Dated 19-01-2026
Open Tender
Civil Works
Percentage
45 days
Bandipora
As per NIT
2 documents required · 2 mandatory
₹200
Executive Engineer RandB Division Bandipora
₹4,760
4 Feb 2026
19 Jan 2026
28 Jan 2026
20 Jan 2026
27 Jan 2026
20 Jan 2026
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by EIC, All kinds of soil
Providing and laying of hand packed boulders in foundation trenches including ramming watering etc including all carriage of material involved & head load complete job
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for: i) Foundations, footings, bases of columns etc
ii) Suspended floors, roofs, landings, balconies and access platforms.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforcement of R.C.C work incl. straightening, cutting, bending, placing in position and binding at all levels complete including all cost and carriages of material involved & head load.
Providing and fixing of wood work in frames of doors, windows celestory windows wrought framed of first class imported Wood including all carriage of material involved & head load complete job.
Providing and fixing of 40x5 mm flat iron hold fast including fixing of frames with nuts and bolts including all carriage of material involved & head load complete job
Providing and applying of 12mm Cement plaster of mix 1:6 ( 1 cement:6 fine sand ) including all carriage of material involved & head load complete job
Providing & fixing paneled or paneled & glazed shutters for doors & windows and clerestory windows including ISI marked black enameled M.S Butt hinges with necessary screws excluding paneling imported wood Including cost & carriage and head loads of all materials involved complete
P/F of glass panes 3.50 mm thick incl beading nails etc including cost of carriage and head loads complete
Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture including cost of carriage and head loads.
Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. including cost of carriage and head load.
Providing and applying 2 mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including all carriages of material involved & head load.
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded
Providing/Fixing colour coated high Rib GS sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers filled with white lead and including Ridges and valleys all complete job (upto a pitch of 60 degrees), excluding the cost of purlins, rafters and trusses.0.50mm thick including all carriages of material involved & head load.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface including all carriages of material involved & head load.
Finishing walls with water proofing cement paint of approved brand and manufacture & of required shade to give an even shade on New work (two or more coats applied @ 3.84 kg/10sqm) including all carriages of material involved & head load.
P/F of following hardware fittings of ISI Marked complete job including all cost and carriages of material involved & head load. A) Handle 4"
B) Tower bolt 6"
C) Tower bolt 4"
D) Handle 6"
E) L Drops 9"
F) Lock
G) Air Hooks
H) Hinges 3"
Providing & fixing paneling for shutters of doors of decorative prelaminated partical board with decorative laminations on both sides. Including cost of carrriage and head loads . Etc complete job .
Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete Including cost of carrriage and head loads . Etc complete job .
Dry random rubble masonry with hard stone in foundation and plinth, Nallah stone with bond stone including carriage and head load.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
Providing and placing on terrace polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including cost of carriage and head load etc complete.
Providing and fixing 03 layer P.P.R pipes SDR 7.4 UV stablized an anitmicrobial fusion welded having thermal stability for hot and cold water with PPR fittings and clamps, including cutting and making good the walls ete of 15mm to 20MM medium.including trenching and refilling all complete including cost of carriage and head load etc complete.
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including cost of carriage and head load.
Providing and fixing soil waste, vent pipes 100mm including tees, bends, collar including trenching and refilling all complete.
Providing and fixing soil waste, vent pipes 75mm including tees, bends, collar including trenching and refilling all complete.
P/F of following C.P fittings as approved by Engineer in charge including all complete. A) Soap case of approved quality
B) Mirror 450x600mm of approved quality
C) 100 mm steel gratings in nahani or gully trap
D) Towel rod of good quality
E) C.P PIPES of approved quality
F) Gate valve of approved quality
G) C.I Bib Cock 15 mm
P/F of wire mesh including cost of nails and beading etc complete job.
Carriage of material by mechnical Transport including loading, unloading for:- i. Sand average lead 1 km
ii. Bajri average lead 30 km
iii. Bricks average lead 80 km
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
finance_976418.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.87 MB
BOQ_976418.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .