Construction of Girls Research Scholar Hostel at Main Campus of Ravenshaw University, Cuttack

NAME OF WORK: CONSTRUCTION OF GIRLS' RESEARCH SCHOLAR HOSTEL AT MAIN CAMPUS OF

RAVENSHAW UNIVERSITY, CUTTACK

Sl. No. Description of Item Schedule Amount Total Amount

Sl. No. Description of Item Schedule Amount Total Amount

IV Firefighting Works 0.00 17,01,772.40 17,01,772.40

Digitally signed by JAYA

NAME OF WORK: CONSTRUCTION OF GIRLS' RESEARCH SCHOLAR HOSTEL AT MAIN CAMPUS OF RAVENSHAW UNIVERSITY, CUTTACK

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

1 Civil Works 0.00 0.00

Earth work in excavation of foundation trenches in ordinary soil

including dressing of sides and levelling the bed up to the required

depth and depositing the excavated materials away from the work

2 1 site within 50m initial lead & 1.5m initial lifts with sundries & T&P Cum 717.67 237.89 1,70,725.08 0.00

required for the work complete including cost of all labour,labour

cess,T&P,sundries etc. as directed by the Engineer in charge.

Filling in foundation trenches and plinth, with excavated earth

including laying the earth in layers not exceeding 23.5 cm thick

3 2 ramming & watering with all leads & lifts including cost of all Cum 466.49 177.59 82,843.96 0.00

labour,T&P completed as directed by the Engineer-in-charge.

Providing 500 mm dia bored cast-in-situ RCC Pile with M-25 grade

concrete including cost of boring to required dia meter and depth to

plumb and taking precautionary measure against collapsing of side

soil due to presence of water table using bentonite powder etc.,

concreting and driving the cage made of M.S. / T.S. steel as per

approved drawing into the freshly laid concrete vertically by means

of power winch to requied depth but excluding cost of M.S. / T.S.

4 3 steel and labour charges for cutting, bending and binding of steel 0.00 0.00

etc. complete confirming to IS-2911 specification including

necessary routine tests including pile integrity test cost,

conveyance, royalties and taxes of all materials with labour,labour

cess and T&P etc. required for the work complete as per the

specification and instruction of Engineer-in-Charge.

Supplying and filling in foundation and plinth with good quality river

sand including watering, ramming with cost, conveyances, royalties

7 6 of all materials and cost of all labour with T&P required for the work Cum 325.64 637.91 2,07,728.36 0.00

etc. complete as per specification & direction of Engineer-in-charge

Providing & applying of pre constructional anti-termite treatment by

drilling 12mm dia holes at distance of 30cm @ junction of wall &

floor about 300mm apart deep enough to reach the soil below &

chemical emulsion (IMIDACHLOPRIED 30.5SC mixed with 47.5ltr

water) pumped these holes to soak the soil @ 1 ltr solution of each

hole as per manufactures specification & the holes should be

pluged the filling materials including cost of all materials,

labour,conveyance, T&P , all taxes and hire charges of machinaries

as per direction of Engineer-in-charge.

Cement concrete of proportion (1:3:6) in foundation and floors using

4cm size clean hard black crusher broken granite stone metal of

approved quality and from approved quarry including hoisting,

lowering and laying concrete in layers not exceeding 15 cm. (6")

9 8 thick to the required level ramming, watering, curing etc. complete Cum 158.33 7616.90 12,05,983.78 0.00

including cost, conveyance, royalties of all materials with all labour

and T&P required for the work etc. complete in all respect and as

per the direction of the Engineer-in-charge.

Plain cement concrete (1:2:4) using 12mm size black hard crusher

broken granite chips of approved quality from approved quarry

including hoisting, lowering and laying concrete in layers, watering,

10 9 curing etc. complete including cost, conveyance, royalties of all Cum 50.28 9517.05 4,78,517.48 0.00

materials with labour,labour cess and T&P etc. required for the work

complete as per the direction of the Engineer-in-charge.

Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth

using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing

strength of not less than 75 kg./sqcm with dimensional tolerance ±

2% including splays cutting circular moulding chamfering and

corbelling and similar such type of works with all necessary

11 10 projections watering and curing after immersing the bricks in water Cum 32.19 6353.47 2,04,518.33 0.00

at least for six hours before use including cost, conveyance, and

royalties of all materials with all labour,labour cess and T & P

required for the work complete in all respect as per direction of

Engineer-in-Charge

Fly Ash brick masonry in cement mortar (1:6) in super structure

using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing

strength of not less than 75 kg./sqcm with dimensional tolerance ±

2% including splays cutting circular moulding chamfering and

corbelling and similar such type of works with all necessary

12 11 projections watering and curing after immersing the bricks in water 0.00 0.00

at least for six hours before use including cost, conveyance,

royalties and taxes of all materials with all labour,labour cess and T

& P required for the work complete in all respect as per direction of

Engineer-in-Charge.

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Fly Ash brick masonry in cement mortar (1:4) in super structure

using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing

strength of not less than 75 kg./sqcm with dimensional tolerance ±

2% including splays cutting circular moulding chamfering and

corbelling and similar such type of works with all necessary

22 21 projections watering and curing after immersing the bricks in water 0.00 0.00

at least for six hours before use including cost, conveyance,

royalties and taxes of all materials with all labour,labour cess and T

& P required for the work complete in all respect as per direction of

Engineer-in-Charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of

M-25 grade as per approved designs and drawings having a

minimum compressive strength (in work test) 250 Kg. / Square cm.

in 15 cm. cubes at 28 days after mixing and test conducted in

accordance with I.S. 516 using 12 mm. to 20 mm. size black hard

crushed broken granite stone chips and screened and washed

sharp sand for mortar of approved quality from approved quarry,

washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to

be mixed in concrete mixture with Portland slag cement (PSC)

including hoisting, lowering, laying and compaction concrete by

31 30 using vibrators, watering and curing for 28 days, centering and 0.00 0.00

shuttering then after dismantling and removing debris from the work

site and finishing the exposed surface smooth providing grooves or

beads wherever necessary including cost, conveyance, loading,

unloading, royalties and taxes of all materials and cost of all

labours, sundries, T & P required of the work etc. complete in all

respect as directed by the Engineer-in-Charge. But excluding cost

and conveyance of M.S. rods or Tor steel and binding wires and

labour charges for straightening, cutting, bending etc. of M.S. rods

or tor steel tying the grills and placing in proper position.

32 31 Stilt floor 0.00 0.00

36 35 c) Column up to ceiling level Cum 59.84 19449.00 11,63,750.12 0.00

42 41 a) Column up to ceiling level Cum 67.40 21835.66 14,71,636.41 0.00

48 47 a) Column up to ceiling level Cum 67.40 24692.44 16,64,171.96 0.00

54 53 a) Column up to ceiling level Cum 69.17 28112.44 19,44,481.11 0.00

60 59 a) Column up to ceiling level Cum 69.17 32207.16 22,27,704.57 0.00

66 65 a) Column up to ceiling level Cum 69.17 37110.06 25,66,828.35 0.00

72 71 a) Column up to ceiling level Cum 69.17 42981.15 29,72,919.91 0.00

78 77 a) Column up to ceiling level Cum 69.17 50012.29 34,59,250.35 0.00

83 82 Terrace floor 0.00 0.00

84 83 a) Column up to ceiling level Cum 19.78 58433.36 11,55,811.94 0.00

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor

steel of primary steel producers including bending, binding, welding

and jointing if necessary and tying the grills and placing in position

as required for R.C.C. Work and for providing fan hooks as

required, hoisting, lowering, laying including cost, conveyances of

M.S. Rod or tor steel and binding wires of 18 to 20 gauge and

labour required for the work for bending, binding and tying the grills

in all floors with labour cess etc. (payment will be made on standard

weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per

specification & direction of Engineer-in-charge.

Providing 12 mm thick cement plaster with cement mortar of mix

(1:6) with screened and washed sharp sand for mortar and finished

smooth to the rough surface of walls in all heights after racking out

joints including watering and curing, rounding of corners, providing

98 97 grooves where ever necessary with cost, conveyance, royalties of 0.00 0.00

all materials with cost of all labour,labour cess, T&P, and scaffolding

required for the work etc. complete in all respect as directed by the

Engineer in charge.

Providing 16 mm thick cement plaster with cement mortar of mix

(1:6) with screened and washed sharp sand for mortar and finished

smooth to the rough surface of walls in all heights after racking out

joints including watering and curing, rounding of corners, providing

108 107 grooves where ever necessary with cost, conveyance, royalties of 0.00 0.00

all materials with cost of all labour,labour cess, T&P, and scaffolding

required for the work etc. complete in all respect as directed by the

Engineer in charge.

Providing 6 mm thick cement plaster with cement mortar of mix (1:4)

with screened and washed sharp sand for mortar and finished

smooth to R.C.C. work after closed deep chipping & slurry

treatment including watering and curing, rounding of corners,

providing grooves where ever necessary with cost, conveyance,

royalties of all materials with cost of all labour,labour cess, T&P,

and scaffolding required for the work etc. complete in all respect as

directed by the Engineer in charge.

Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40

sqm. (20mm thick) of approved make in floors laid on 20 mm thick

cement mortar (1:4) (1 cement : 4 course sand) and filling

128 127 joints with slurry including cost of all materials, labour T&P etc. 0.00 0.00

required for the work all complete incl. rubbing as per direction of

the Engineer-in-charge.

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Fixing granite tiles of approved dimension area above 0.1 up to 0.4

sqm (10mm thick) in Dados, treads of steps and landing on 12mm

thick cement mortar (1:3) jointed with neat cement slurry mixed with

137 136 pigment to match the shades of the tiles including rubbing and 0.00 0.00

polishing etc. complete with cost, conveyance, royalties and taxes

of all materials complete in all respects as per direction of Engineer-

Supplying, fitting & fixing of 8-10 mm thick & size of 600x600 mm

Glazed vertified floor tile (GVT) of with veilcraft (VC/FT ) shield(

Scratch free/stain free) with water absorption limit between 0.08%

to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20

146 145 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling 0.00 0.00

joints with white cement of approved quality including cost of all

materials, labour T&P etc. required for the work all complete as per

direction of the Engineer-in-charge (for New Work only )

Supplying, fitting & fixing of 8-10 mm thick and size of 600x600

mm Glazed vertified wall tile of in dadoes, skirting and risers of

steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3

course sand) jointed with slurry mixed with pigment to match the

155 154 shades of the tiles etc. complete including cost of all materials, 0.00 0.00

labour T&P etc. required for the work all complete as per direction

of the Engineer-in-charge.

Supplying, fitting & fixing of Chequered tiles in floors of approved

make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course

164 163 sand) and filling joints with slurry including cost of all materials, 0.00 0.00

labour T&P etc required for the work all complete as per direction of

the Engineer-in-charge

Supplying, fitting and fixing of Antiskid Ceramic Floor Tiles in

flooring using special plain / printed series Ceramic Floor Tile of

premium grade ( having minimum thickness 7 mm to 8 mm & size

300 mm x300 mm, confirming to I.S 13755 of approved quality and

shade in floors, treads on steps and landings on 20 m.m thick bed

of cement mortar of mix (1:4) laid in proper slope and gradient with

screened & washed sharp river sand for mortar and fixing with

neat white cement slurry,grouting the joints with neat white cement

slurry mixed with required quantities of pigments (Tiles are to be

immersed in the water for required time before use) of approved

166 165 make to match the shades of the Ceramic Floor Tiles if required 0.00 0.00

including cost, conveyance, loading, unloading, stacking, royalties ,

all taxes, cost of all Labour, Labour cess ,Sundries, T&P required

for the work , Watering , Curing for required days , cleaning the

flooring space manually etc.complete in all respect as directed by

the Engineer-in-charge.

Supplying, fitting & fixing of 600mm x 300mm Ceramic wall tiles

having thickness 6.5mm to 7.0 mm confirming to IS 13753 in

dadoes, skirting and risers of steps laid on 12 mm thick cement

mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed

175 174 with pigment to match the shades of the tiles etc. complete 0.00 0.00

including cost of all materials, labour T&P etc. required for the work

all complete as per direction of the Engineer-in-charge

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Providing & Fixinng factory made 100% Solid WPC ( Wood Polymer

Composite ) - Door Frame 125 mm x 65 mm Single Rebated, made

from Wood Polymer Composite ( Single Extruded Process ) material

comparising of virgin PVC polymer of K Value 57-60 ( Suspension

Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/

Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with

meter Joints after applying PVC solvent Cement & screwed with full

body treaded star headed screws having minimum frame density of

780 kg/ cbm & an ISO 9001 - 2015 Certified Company, having good

screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N

), Minimum Compressive Strength of 58 N/mm2, Modulus of

184 183 elasticity 900N/mm2 and resistance to spread of flame of class A 0.00 0.00

category with property of being termite / borer proof , water /

Moisture Proof & Fire retardant & Fixed in position with SS Dash

Fasteners / Hold Fast of reuired dia and lenght, , all as per

specifications drawings as directed by the Engineer-In-Charge.

Material test certificate and authentication should be compulsory

provided by the manufacturing company.

Supplying, fitting and fixing of 32mm thick flush door shutter with

approved quality of 30mm thick BWR block board pasted with 1mm

thick sunmica on both side of approved design and quality including

cost of all door fittings and fixtures etc. complete in all respect as

per the direction of the Engineer-in-Charge.

Factory made single leaf rigid FRP(alternately called GRP) sandwich

composite door shutter of 30 mm thick laminated with two GRP skins

with wood grain finish fabricated using UV-stabilised Isopthalic

Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat

(CSM) impregnated with orthopthalic palyester resin. The thickness

of the skins shall not be less than 3.00mm Expanded

Polystyrone(EPS) structural foam panel of 27 mm thickness and a

density of 20kg/cu.mtr shall be used as core material. Wooden

reinforcements made of seasoned sal wood block of cross section

not less than 25mmx32mm and also necessary sal wood

reinforcements for fitting the metal fittings such as tower bolts,

aldrops, handles etc shall be provided. A structural adhesive

202 201 compatible with (EPS) foam shall be used for bending the core 0.00 0.00

material, the sal wood reiforcements and the skins. The material and

process for manufacturing the door shutters shall conform to RV-

TIFAC composites Design Centre's standards and specifications and

the door shutters tested in conformation to IS: 4020-1998. The finish

of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/

Mahogany/ Teak wood or any other colour using high quality

pigments. Three heavy whight mild steel butt hinges type-I(ISI

marked) size 100mm are to be fitted on one side of shutter with FRP

frame of size 45x90mm.

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Supplying and fixing of Powder coated 50-60 microns approved

colour of Aluminium 40mm Casement series Door Unit with suitable

aluminium extrude profiles. the system is designed to accommodate

12mm clear toughened glass of make-Saint

gobain/AIS/Gardian/modi. the rate quoted inclusive of hardwares

like antilift,roller, Espag lock cum handle,epdm gaskets,T mullion

,Fly Mullion ,bottom adopter ,mid transom ,glazing clip for 12 mm

glass felt along with all accessories etc complete. the gap between

211 210 the wall and window will be filled with silicon weather sealant in the 0.00 0.00

outer side. Casement Door Outer frame - 40mm x 45.3mm Series x

1.4mm thickness, Fly mullion - 44 x 60 mm x 1.4mm thickness, T

Mullion 40 x 78.4mm x 1.4mm thickness, Transom - 40.28 x 125.8 x

1.75 mm thickness, Bottom adopter - 34.6 x 26 x 1.5mm thickness,

including cost of all materials, all labour, sundries, T&P etc.

complete in all respect as per direction of Engineer-in-Charge.

Providing and fixing ISI Marked un-insulated fire rated door

confirming to IS 3614:2021,& tested to IS17518,and shall carry a

unique label with certification/test report number.The fire rating shall

be for 120minutes integrity only.Material shall be galvanised steel

conforming to IS 277, made out of minimum 1.2(18 SWG) for both

frame and shutter, G.I. sheet (zinc coating 120 gsm/sqm).Frame

shall be 125 x 55 grooved profile with built in rebate for fire rated

smoke seal. Frame shall be mitered and field assembled. EPDM

smoke seal to be provided along with frame as standard. Door

shutter shall be double skin of 46mm thick with required fire rating

220 219 and with vision panel. The infill material shall be resin bonded 0.00 0.00

honeycomb core. All doorset shall be factory prepped for receiving

appropriate hardware and provided with necessary reinforcement

for hinges, locks and door closers.The door stiles should be

interlocked, for pairs of doors integral astragals has to be provided

on the meeting stile for both active and inactive leaf. Vision lite,

minimum 5mm clear fire rated glass of size 150 x 750mm (max

0.12sq.mt) on both shutters, fixing with clipon arrangement.

All frame and door shutter shall be finished polyster powder coated

to minimum 50microns, of approved colour as per the direction of

the engineer incharge. Cost of double leaf doorset shall include

following hardware and accessories as a complete assembly. SS

ball bearing hinges of SS-304 grade of size100x75x3mm,1no Fire

rated mortise dead lock, 55mm BS, 20mm sq. forend, including

escutheion, sss as per EN 12209 with both side key cylinder on

active leaf and 2nos flush bolt on the inactive leaf in case of double

leaf door along with dust proof socket at bottom, 1pairs Pull handle

D type, 22dia, CTC 300mm, back to back per leaf, with spindle,SS

304, SS finish. 1no of Door closer with spring size of EN 2- 4, as

per EN1154 and CE marked per leaf. Suitable anchor fastners for

fixing on different type of wall construction as per manufacturer 0.00 0.00

recommendation.Once frames is installed it shall be filled with fire

rated PUF. Manufacturer test certificates shall covers complete

door set as a un-latched assembly with a valid test certificate not

exceeding 5 years from the date of issue of report. for more info

refer doors details drawings, including cost of all materials, all

labour, sundries, T&P etc. complete in all respect as per direction

of Engineer-in-Charge.

Supplying and installing UPVC- 3 track 3 shutter sliding windows

with Outer dimension - 104 x 49 sash dimension of 61mm x 39mm

for windows with corners fusion welded, fully reinforced with

Galvanized steel of 1.2 mm to 2 mm. The sash will be fitted with

5mm reflective toughened glass . The windows must be installed

complete with all kinds of ironmongery (including EPDM

230 229 gaskets,bridging wedges and glass packers) and with suitable water 0.00 0.00

draining system. Application of Silicon sealant from Inside / Outside

of Dowcorning / GE or equivalent including cost of all materials, all

labour, sundries, T&P etc. complete in all respect as per approved

drawing & direction of Engineer-in-Charge.

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S.

gates, garage door, collapsible gates with top and bottom rails, steel

windows, critical frames for windows, stair case and parapet railing

made out of M.S Square bar/ flat including stair case hand railing

with 40mm. dia G.I.pipe etc. including painting two coats over a

coat of redoxide primer as per approved drawing and design with

cost of all materials & labour, labour cess, T&P, sundries etc.

complete in all respect as per specification & direction of the

Engineer-in-Charge.

Priming one coat with wall cement primer (water bound) to make an

even finished surface in all floors and heights to wall surface of

approved make and shade including sand papering, applying putty

wherever necessary & cost of scaffolding, staging charges with

cost, conveyance, cost of all labour,labour cess T&P etc. complete

as per the direction of the Engineer-in-charge.

Finishing wall with textured exterior paint of required shade :

New work (two or more coats appplied @3.28litre/10sqm)over and

260 259 including priming coat of exterior primer applied @2.20kg/10Sqm 0.00 0.00

Finishing plastered surfaces of walls with cement based wall putty

(Water based) of approved and finishing the surface smooth and

even by sand papering to receive painting in walls, at all heights

270 269 with staging wherever necessary with cost, conveyance, cost of all 0.00 0.00

labour,labourcess, all T&P etc. required for the work complete in all

respect as per the direction of the Engineer-in-charge.

Painting two coats with plastic emulsion paint with a approved

quality primer to make an even finished surface in all floors and

heights to wall surface of approved make and shade including sand

papering, applying putty wherever necessary & cost of scaffolding,

280 279 staging charges with cost, conveyance, cost of all labour,labour 0.00 0.00

cess, T&P etc. complete as per the direction of the Engineer-in-

Engineer-in-charge.

Painting two coat with approved synthetic enamel paint to new

wood work over a coat of Red oxide primer including cost,

conveyances, royalties, taxes of all materials and cost of all labour

290 289 with T&P required for the work etc. complete as per specification & 0.00 0.00

direction of Engineer in charge.

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Painting two coat with approved synthetic enamel paint to new iron

work over a coat of Red oxide primer including cost, conveyances,

royalties, taxes of all materials and cost of all labour with T&P

299 298 required for the work etc. complete as per specification & direction 0.00 0.00

of Engineer in charge.

Supplying, fitting and fixing of Stainless steel of 304 grade in hand

railing using 50mm dia of 2mm thick circular pipe with Balustrade of

size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square

pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as

per approved design and specification, buffing, polishing etc with

cost, conveyance, cost of all labour,labour cess, T&P etc. required

for the work complete in all respect as per direction of the Engineer-

Providing & applying cementitious coating AquaArm UM or

equivalent waterproofing in two coats @ 2kg/m2 . The material shall

folloe below parameter: Tensile Strength- 0.6 N/mm2 Elongation -

318 317 60% including cleaning,applying and mending as per specification 0.00 0.00

including cost, conveyance,taxes,royalities of all materials to work

site etc.all complete as per the direction of the Engineer-in-charge.

Providing 2.5cm thick Grading Concrete over roof slab with cement

concrete (1:2:2) using 6mm size black hard granite crusher broken

chips and screened & washed sharp sand for mortar and finished

smooth to the rough surface of slab including watering and curing

327 326 with cost, conveyance, royalties of all materials with cost of all 0.00 0.00

labour, labour cess and T&P required for the work etc. complete in

all respect as directed by the Engineer in charge.

Providing and applying of two component spray applied rapid setting

hybrid Polyurea coating of AquaArm Purtech H1

@1.2kg/m2/1.2mm alomg with epoxy primer @0.4kg/m2 and shall

include geo-textile.(Terrace area )

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Supply and Installation of Anutone 0.5MM mm thick Metal ceiling

tile Serge Astral Lay Inof size 595 x 595 mm having density Kgs/

m3, weight 4 kg/m2 which is suspended by using 0.3 mm thick and

24 mm wide precoated metal T 24 grid system. The technical

parameters are as follows :Core - GMS*, Fire – Class-A , Acoustics

– STC 50 - 90 ,TOA-20% ,Mensa-1.8mm Termite resistance

,Green (RC %) – 25, Hygiene (VoC, Clean room) – Low , Thermal -

NA W/mK,Poly Coated 60 microns Fleech Included. The T 24 Grid

system of 600 x 600 mm module shall include wall angle (WA 24 W

30) with unequal flanges of size 14 & 20 mm wide, length 3000 mm,

0.43 mm thick fixed along the perimeter of wall with the help of

nylon sleeves and suitable fasteners at 300 mm centers. Then

suspend the Main T 24(MT 24 W 36) having flange width 24 mm,

height 32 mm and length 3600 mm from the soffit with help of soffit

331 330 cleat and wire rod along with leveling spring clip at 1200 mm c/c. 0.00 0.00

Cross 24(CT 24 W 12) with flange width 24 mm, height 32 mm and

length 1200 mm is then interlocked into the precut slots in the Main

T 24 at 600 mm centers in the direction perpendicular to the Main T

24. Infill Of Anutone Polyfibre Synth 5x50 Laying in back of the

Metal tiles .Finally Cross T 24 (CT 24 W 06) having flange width 24

mm, height 32 mm and length 600 mm are then interlocked into the

precut slots in the 1200 mm Cross T 24 at 1200 mm centers and in

direction parallel to the Main T 24. Magnesium oxide square edge of

size 595 x 595 x 0.5 mm thick shall be placed into the grid size of

600 x 600 mm. Test certificate will be submitted after procurement

Vertical load testing of piles in accordance with IS 2911 (Part

IV)including installation of loading platform by Kentledge/Anchor

piles method and preparation of pile head or construction of test

340 339 cap and dismantling of test cap after test etc. complete as per

specification & the direction of Engineer in-charge.(Lab test should

be carried out of any Govt lab /NABL accreditation lab)

341 340 Single pile above 50 tonne and upto 100 tonne Safe capacity

342 341 Initial test (Test Load 2.5 times the Safe capacity) 2.00 61173.37 1,22,346.74 0.00

Vertical load testing of piles in accordance with IS 2911 (Part

IV)including installation of loading platform by Kentledge/Anchor

piles method and preparation of pile head or construction of test

343 342 cap and dismantling of test cap after test etc. complete as per

specification & the direction of Engineer in-charge. (Lab test should

be carried out of any Govt lab /NABL accreditation lab)

344 343 Single pile above 50 tonne and upto 100 tonne Safe capacity

345 344 Routine test (Test Load 1.5 times the Safe capacity) 2.00 32436.11 64,872.22 0.00

346 Sub-Total of Civil Works 16,15,96,998.52 1,50,90,749.74

347 Plumbing Works 0.00 0.00

348 1 INTERNAL PH WORK 0.00 0.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having theRmtal stability for hot & cold water supply, including all

CPVC pipes SDR-11 as per IS-15778/2007 plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the same

349 2 including testing of joints complete as per direction of Engineer in 0.00

Concealed work, including cutting chases and making good the

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having theRmtal stability for hot & cold water supply, including all

CPVC pipes SDR-11 as per IS-15778/2007 plain & brass threaded

fittings, including fixing the pipe with clamps at 1.00 m spacing. This

380 33 includes jointing of pipes & fittings with one step CPVC solvent 0.00 0.00

cement and testing of joints complete as per direction of Engineer in

381 34 External work 0.00 0.00

Providing all materials, labour, T&P for fitting & fixing of following

brass full way Valves in all floor & fixing with the pipes after cutting

the pipes to required shape & size including wastage etc. of

following nominal diameter, all complete including testing the joints

383 36 with required water pressure.The cost inclusive of transportation 0.00 0.00

scaffolding etc. all complete as per specification excluding GST and

direction of Engineer-in-charge.

384 37 25mm dia brass full way valve Nos 150.00 1430.40 2,14,559.40 0.00

385 38 32mm dia brass full way valve Nos 42.00 2094.03 87,949.18 0.00

386 39 40mm dia brass full way valve Nos 20.00 2658.30 53,166.08 0.00

387 40 50mm dia brass full way valve Nos 35.00 3935.18 1,37,731.37 0.00

Providing all materials labour, T&P for making grooves in

bricks/stone masonary walls vertically or horizontally up to required

depth and width in all floor for laying of pipes and fittings up to

50mm dia, testing the joints with required water pressure and

388 41 making good the damages with cement concrete 1:2:4 with 12mm 3,28,942.70 0.00

size h.g.c.b.chips and finished smooth with cement morter (1:4) to

original shape including cost of materials, curing, conveyance, taxes

of all materials etc. all complete as per specification & direction of

Providing all labour,T&P for cutting holes in bricks or stone masonry

wall for taking pipes in all floors and making good the damages with

cement concrete 1:2:4 finished smooth with CP 1:4 to original

389 42 shape including cost of all materials, curing, conveyance, taxes, 0.00 0.00

duties etc. all complete as per specification & direction of Engineer-

For 25mm to 110mm dia pipe to pass in 250mm thick wall

Providing all labour,T&P and cutting holes in brick masonry wall

/RCC wall for crossing of GI pipes / CI pipes/ HCI pipes of different

391 44 dia and making good to the damage with (1:4) complete as per 94,566.14 0.00

specification & direction of EIC.

Providing, fixing, jointing and testing PP mineral filled low noise level

Soil & Waste piping system as per BS EN 1451, SN4-S16, with

minimum density for pipes and fittings 1.4 gm/cm3. Pipes and

fittings made from Polypropylene-M (mineral reinforced) and

available from 50 – 160 mm with push fit SBR type rubber ring

sockets for easy installation. Pipes should have 3 layer design.

Should have hot water resistance up 95ºC for short term loading

(90ºC for long term loading). Piping system should have chemical

resistance of pH 2-12. Fittings should have swept design from 75-

160mm and depth gauge for proper fittings against thermal

expansion and contraction, should have top marking at every 15°

392 45 intervals in angular rotation for better alignment. Piping system 0.00 0.00

includes all required fittings & accessories such as coupler, bend,

tee, Y, reducer, access pipe, multi floor traps, Nahni trap with

extension piece etc. for conveying soil, waste & rainwater purpose

in floors, ceiling suspended, or on walls, with leak proof joints etc.

Setting the pipe in 1:2:4 CC in case of concealed plumbing, wall

chasing, holes, supporting, clamping, covering back with chicken

mesh & plaster and making the wall good as per approved shop

drawing. Testing as per tender specifications/EIC.

394 47 75mm U-PVC SWR Pipe (Astral/Supreme /Ashirvad) Mtr. 600.00 730.30 4,38,181.20 0.00

Supplying all materials, labour, T&P and fitting and fixing U-PVC

SWR soil waste ventilating pipes and fittings of the following outside

diameter conforming to ISI No 13592/1992 to walls with nails,

bobbins and wooden plugs or laying in trenches including jointing

with supply of approved rubber lubricant by non-heat application

395 48 method/as per manufacturer's specification, testing, earthwork in 0.00 0.00

excavation in all kinds of soil and refilling of trenches , cost &

conveyance of all materials to worksite, payment of taxes etc. all

complete as per P.H specification and direction of the Engineer-in-

110mm U-PVC ‘P’ Trap

110mm U-PVC door bend

110mm U-PVC Plain bend

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

110mm U-PVC offset without ear

110mm U-PVC Cowl

110mm U-PVC S/Jn door

110mm U-PVC Plain tee

110mm U-PVC D/Jn door

110mm U-PVC Door tee

110mm U-PVC Socket

Fixing granite tiles of approved dimension area above 0.4 sqm

(20mm thick) in floor, treads of steps and landing on 20mm thick

bed of cement mortar (1:4) jointed with neat cement slurry mixed

407 60 with pigment to match the shades of the tiles including rubbing and 0.00 0.00

polishing etc. complete with cost, conveyance, royalties and taxes

of all materials complete in all respects as per direction of Engineer-

Fixing granite tiles of approved dimension area above 0.1 up to 0.4

sqm (10mm thick) in Dados, treads of steps and landing on 12mm

thick cement mortar (1:3) jointed with neat cement slurry mixed with

415 68 pigment to match the shades of the tiles including rubbing and 0.00 0.00

polishing etc. complete with cost, conveyance, royalties and taxes

of all materials complete in all respects as per direction of Engineer-

Providing all materials, labour, T&P European type floor mounted

WC with seat, white plastic lid and flushing PVC cistern as per

423 76 specification of Hindware Popular (Starwhite), Cat. Code: 20065,cist- NOS 66.00 13279.60 8,76,453.73 0.00

21054 or equivalent.

Supply all materials and labour for fitting and fixing of following size

Half Pedestral Wash Basin with fixing Accessories,Size-550X400

mm, of approved make in all floor of approved quality including

cutting the walls & floor and making good the damages with cement

424 77 concrete etc. including all taxes, duties, transportation etc. all 0.00 0.00

complete as per direction of EIC.

Under counter Wash Basin ,Size-560X450 mm

425 78 (As per Cat no: 10049 OF Hindware /Cera or equivalent.) Ech No 63.00 4989.28 3,14,324.39 0.00

Wall Hung Half Pedestral Wash Basin ,Size-550X400 mm

426 79 (As per Cat no: 10087 ,ped-11027 OF Hindware /Cera or Ech No 7.00 6210.81 43,475.68 0.00

Supply,fitting and fixing all materials, labour, T&P as per

specification , the following Brass/ CP (Jaquar) / G.M. fittings at

427 80 appropriate locations to thr pipe lines at all floors and at all heights, 0.00 0.00

of approved make confirming to relevent IS specification . etc

complete in all respect.

Brisk Health Faucet ABS with Rubbit cleaning system,1.25 m Long

428 81 SS Flexible Tube & ABS Wall Hook (As per Cat no.-F160110 OF NOS 66.00 1498.65 98,910.72 0.00

HINDWARE or equivalent. )

Two-way Bibcock with wall Flange.

(As per Cat no.- F740004 of Hindware or equivalent.)

One-way Bib cock with wall Flange.

(As per Cat no. -F360004 of Hindware or equivalent.)

CP brass Prismatic type pillar cock for hot & cold water of Jaquar

make, Item Code: -F280010, Central Hole Basin Mixer with Regular

431 84 Spout without Popup Waste System with 450mm Long Braided NOS 63.00 4142.74 2,60,992.87 0.00

Hoses, 20mm Cartridge Size or equivalent.

(As per Cat no. -Hindware Cat No- F360001 or equivalent.)

15mm dia Angle Stop cock with Wall Flange.

(As per Cat no. - F280004 of hindware or equivalent.)

15mm dia Concealed stop cock with wall flange.

(As per Cat no. - F740013 of hindware or equivalent.)

Supplying all materials, labour, T&P and fixing mirror of superior

glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed

435 88 to wooden plugs with CP screws and washers complete as per 0.00 0.00

specification and direction of Engineer in charge.

Soap dish in each toilet / bath with of Hindware make Item Code:

F890005 Soap Dish Holder or equivalent.

32 mm C.P. Bottle Trap 32mm with 125 & 175mm Long Wall

438 91 Connection pipe & wall Flange No. 73.00 2132.14 1,55,646.37 0.00

(As per Cat no. - F850015 of hindware or equivalent.)

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Waste Coupling of Jaquar make Item Code: ALD-705 Waste

439 92 coupling 32mm Size Full Thread with 80mm height or equivalent. No. 73.00 645.58 47,127.19 0.00

440 93 15mm CP Extension piece Each 227.00 62.07 0.00 14,089.44

Towel bar for individual bathroom of Jaquar make Item Code:

F890011, Stainless Steel or equivalent.

442 95 110 mm dia CP Nahani trap with Grating NOS 330.00 388.46 1,28,190.48 0.00

Ultra Thin SS Rain Shower wt 225 mm shower Arm of Hindware

Shower with arm, Single Flow.

Provision For Overhead Shower Wall mixer with 115mm Long

Bend Pipe On Upper Side, Connecting Legs & Wall Flanges or

equivalent. (As per Cat no. - F690020 of hindware or equivalent.)

Providing and fixing 25 Liter Storage Water Geyser.

445 98 (As per Cat no. - ERD-WHT-V025 of Jaquar or equivalent.) NOS 68.00 23954.00 0.00 16,28,872.00

Supplying all materials, labour, T&P and providing fitting and fixing

(Aqua guard) Pure Chill 80 PSS UV (Eureka Forbes) of size

750x570x1350mm height with water storage capacity 80 liters along

446 99 with 2 nos of faucets 1 for cold water and 1 for normal water Nos 16.00 132445.56 21,19,128.96 0.00

including a flow of 1.5 ltr per minute etc all complete as per

approved drawing,specification and direction of the Engineer in

Supplying all materials, labour, T&P and providing fitting and fixing

(Aqua guard) water storage capacity 25 liters along with 1 nos of

447 100 faucets for normal water . etc all complete as per approved Nos 3.00 33040.00 0.00 99,120.00

drawing,specification and direction of the Engineer in charge.

Providing and fixing stainless Single bowl stainless steel Sink Size-

610mm X 460mm, Depth-254mm with C.I. brackets and stainless

steel plug 40 mm, including painting of fittings and brackets, cutting

and making good the walls wherever required :

Supplying, Installing, Testing and Commissioning sink Cock With

Extended Swinging Spout including CP wall flanges, connectors,

adapters and all other fittings/ accessories required for satisfactory

449 102 installation complete. (As per Cat NOS 3.00 2801.08 8,403.25 0.00

no - F570024 of Hindware or equivalent.)

450 103 Ext. S/D Portion 0.00 0.00

Supplying all materials, labour, T&P and providing, laying (to level or

slopes) and jointing with cement mortar 1:2 of concrete pipes class

NP-2, reinforced light duty non-pressure pipes conforming to IS:458

- 2003 with collars and butt ends prepared for collar joints of the

451 104 following internal diameter including earthwork in excavation of 0.00 0.00

trenches in all kinds of soil and refilling with excavated materials etc

all complete as per approved specification and direction of the

Engineer in charge

Supplying all materials, labour, T&P and laying in trenches (to level

or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of

the following out side dia for class- 3 (0.60mpa ) including jointing

with supply of approved solvent cement by non-heat application

method/as per manufacture's specification, provoding and laying in

trench cement concrete (1:4:8) with 40mm size hard granite metal

in the type C-1 standard bedding surrounding or encasing including

concrete for bedding and curing etc all complete as per P.H.

specification and direction of the Engineer in charge.

Supplying all materials ,labour ,T&P and constructing gully trap

chamber of inside size 250mmx250mm with 8cm thick RCC

precast cover slab in cement concrete (1:2:4) mix using 12mm size

crusher broken HG chips, foundation concrete (1:4:8) using 40mm

size crusher broken HG metal on bed and around trap, KB brick

456 109 work in cement mortar (1:6) in foundation and plinth and inside Each 13.00 1775.43 23,080.56 0.00

12mm thick cement plastering (1:3) finished with a floating coat of

neat cement including fixing 100mmx100mm size HCI gully trap,

150mmX150mm size CI grating etc.all complete as per drawing,

specification and direction of Engineer-in-charge.

Supplying all materials ,labour ,T&P and constructing Inspection

Chamber of inside size 760mmx760mmx460mm with cement

concrete (1:3:6) using 40mm size crusher broken hard black granite

metal on bed , KB brick work in cement mortar (1:6) in foundation

and plinth, moulding and shaping the channel inside and benching

with cement concrete (1:2:4) using 12mm size crusher broken hard

black granite chips, 12mm thick cement plaster (1:3) with cement

punning to inside, cement flush pointing (1:3) to outside, R.C.C

457 110 cover slab (1:2:4) using 12mm size crusher broken hard black 0.00 0.00

granite chips with R.C.C man hole cover, earth work in excavation

in all kinds of soil and refilling the cavity around the chamber

including watering,curing,cost of all materials, conveyance of all

materials to worksite, payment of royalty,all taxes etc.all complete

as per approved drawing, P.H specification and direction of

Engineer-in-charge.

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Inside size 90cmx80cmx45cm with 18” dia RCC MH cover

Supplying all materials labor T&P and constructing MH chamber of

sizes earth work in excavation in all kinds of soil CC(1:1:8) with

black granite chips size 46mm brick work with K.B. brick having

crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in

CM(1:6)12mm C.P(1:8) inside MH chamber over benching with

cement slush pointing (1:3)outside the MH chamber providing

459 112 painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with 0.00 0.00

black granite chips size 12mm bending binding tying the grills

placing of the reinforcement providing RCC color of required size

refilling the cavity around the MH chamber with excavated earth

including channeling the bed of MH etc all complete as per PH

MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )

Supplying all materials, labour, T & P and constructing of Rain water

collection chamber of the following inside size with 8 cm thick

R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g.

chips, foundation concrete (1:4:8) using 40mm size h.g. metal on

bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside

12mm thick cement plastering (1:3) finished with a floating coat of

neat cement including fixing 100mm x100mm size gully trap,

150mm x150mm C.I gratig etc. all complete as per aproved

drawing, specification and direction of Engineer-in-charge.

Providing & fixing Ductile Iron Pipes Pressure ,socket and spigot

pipes conforming to IS : 8329 :2000 (Complete With all joints &

463 116 Fittings) with DI pipes of K-7 Class. 0.00 0.00

464 117 100 mm Ductile iron Class K-7 pipes meter 220.00 1210.98 2,66,414.50 0.00

Supplying all materials, labour, T&P and fitting and fixing of Cast

Iron Sluice Valve with double flanged ends for water

465 118 works purposes conforming to IS 14846 - 2000 (Standard) etc all 0.00 0.00

complete as per the direction of Engineer-in-charge.

Cast Iron Reflux Valves (Non-return valves) with double

467 120 flanged ends conforming to IS : 5312 (Part-I) - 2004 NOS 2.00 9338.47 18,676.95 0.00

Supply, installation, testing and commissioning of pressure boster

pump , Head 30 m all accessories.

469 122 Ball Float (Mechanical) 0.00 0.00

Supply, Installation & commissioning of reputed make mechanically

operated ball float with Brass Arm for each tank for closing &

470 123 opening the inlet of each tank as per the water level in each tank Nos 4.00 4799.06 0.00 19,196.24

suitable for handling 10 Bar pressure

Abstract Estimate of 12.5 KLD RCC Over head water storage tank

Providing, lifting, hoisting and laying Reinforced cement concrete of

M-25 grade as per approved designs and drawings having a

minimum compressive strength (in work test) 250 Kg. / Square cm.

in 15 cm. cubes at 28 days after mixing and test conducted in

accordance with I.S. 516 using 12 mm. to 20 mm. size black hard

crushed broken granite stone chips and screened and washed

sharp sand for mortar of approved quality from approved quarry,

washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to

be mixed in concrete mixture with Portland slag cement (PSC)

including hoisting, lowering, laying and compaction concrete by

using vibrators, watering and curing for 28 days, centering and

472 125 shuttering then after dismantling and removing debris from the work 0.00 0.00

site and finishing the exposed surface smooth providing grooves or

beads wherever necessary including cost, conveyance, loading,

unloading, royalties and taxes of all materials and cost of all

labours, sundries, T & P required of the work etc. complete in all

respect as directed by the Engineer-in-Charge. But excluding cost

and conveyance of M.S. rods or Tor steel and binding wires and

labour charges for straightening, cutting, bending etc. of M.S. rods

or tor steel tying the grills and placing in proper position.

Cutting, straightening coiled or bent up M.S. Rod or tor steel

including bending, binding, welding and joining if necessary and

tying the grills and placing in position as required for R.C.C. Work

and for providing fan hooks as required, hoisting, lowering, laying

including cost, conveyances, taxes of M.S. Rod or tor steel and

binding wires of 18 to 20 gauge and labour required for the work for

bending, binding and tying the grills in all floors (Linear

measurement will be taken and quantity will be calculated basing on

the standard weight of B.I.S. for M.S. Rods or tor steel only.

Wastage if any, including weight of binding wire will not be

considered for measurement) etc. complete as per specification &

direction of Engineer-in-charge.

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

12mm cement plaster to out side of brick surfaces with cement

mortar of mix 1:6 (1 cement : 6 fine sand) including necessary

scaffolding, curing etc. all complete at all floors and all heights.

12mm cement plaster on external RCC/brick surfaces in cement

mortar 1:4 (1 cement : 4 coarse sand) with a floating coat of neat

479 132 cement punning including necessary scaffolding, curing etc. all SQM 41.64 313.29 13,045.40 0.00

complete at all floors and all heights.

Priming one coat with wall cement primer (water bound) to make an

even finished surface in all floors and heights to wall surface of

approved make and shade including sand papering, applying putty

480 133 wherever necessary & cost of scaffolding, staging charges with sqm 36.93 127.56 4,710.72 0.00

cost, conveyance, taxes of all materials, cost of all labour,labour

cess T&P etc. complete as per the direction of the Engineer-in-

Painting two coats with approved anti-fungal weather seal paints

(ISI) of approved colour, shade on wall surface over a coat of wall

primer(ISI) water bound including sand papering, polishing the

481 134 surface, cost, conveyances of all materials and cost of all sqm 24.62 146.32 3,602.40 0.00

labour,labour cess with T&P etc, complete as per specification &

direction of Engineer-in-charge.

2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm &

482 135 down grades size hard granite crusher broken chips on new work in sqm 14.95 968.43 14,477.97 0.00

Abstract Estimate of RCC Over head Water Tank - 5 KLD

Providing, lifting, hoisting and laying Reinforced cement concrete of

M-25 grade as per approved designs and drawings having a

minimum compressive strength (in work test) 250 Kg. / Square cm.

in 15 cm. cubes at 28 days after mixing and test conducted in

accordance with I.S. 516 using 12 mm. to 20 mm. size black hard

crushed broken granite stone chips and screened and washed

sharp sand for mortar of approved quality from approved quarry,

washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to

be mixed in concrete mixture with Portland slag cement (PSC)

including hoisting, lowering, laying and compaction concrete by

using vibrators, watering and curing for 28 days, centering and

484 137 shuttering then after dismantling and removing debris from the work 0.00 0.00

site and finishing the exposed surface smooth providing grooves or

beads wherever necessary including cost, conveyance, loading,

unloading, royalties and taxes of all materials and cost of all

labours, sundries, T & P required of the work etc. complete in all

respect as directed by the Engineer-in-Charge. But excluding cost

and conveyance of M.S. rods or Tor steel and binding wires and

labour charges for straightening, cutting, bending etc. of M.S. rods

or tor steel tying the grills and placing in proper position.

Cutting, straightening coiled or bent up M.S. Rod including

bending, binding, welding and joining if necessary and tying the

grills and placing in position as required for R.C.C. Work and for

providing fan hooks as required, hoisting, lowering, laying including

cost, conveyances, taxes of M.S. Rod or tor steel and binding wires

of 18 to 20 gauge and labour required for the work for bending,

binding and tying the grills in all floors (Linear measurement will be

taken and quantity will be calculated basing on the standard weight

of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including

weight of binding wire will not be considered for measurement) etc.

complete as per specification & direction of Engineer-in-charge.

12mm cement plaster to out side of brick surfaces with cement

mortar of mix 1:6 (1 cement : 6 fine sand) including necessary

scaffolding, curing etc. all complete at all floors and all heights.

12mm cement plaster on external RCC/brick surfaces in cement

mortar 1:4 (1 cement : 4 coarse sand) with a floating coat of neat

491 144 cement punning including necessary scaffolding, curing etc. all SQM 57.00 313.29 17,857.53 0.00

complete at all floors and all heights.

Priming one coat with wall cement primer (water bound) to make an

even finished surface in all floors and heights to wall surface of

approved make and shade including sand papering, applying putty

492 145 wherever necessary & cost of scaffolding, staging charges with sqm 62.70 127.56 7,997.89 0.00

cost, conveyance, taxes of all materials, cost of all labour,labour

cess T&P etc. complete as per the direction of the Engineer-in-

Painting two coats with approved anti-fungal weather seal paints

(ISI) of approved colour, shade on wall surface over a coat of wall

primer(ISI) water bound including sand papering, polishing the

493 146 surface, cost, conveyances of all materials and cost of all sqm 48.24 146.32 7,058.48 0.00

labour,labour cess with T&P etc, complete as per specification &

direction of Engineer-in-charge.

2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm &

494 147 down grades size hard granite crusher broken chips on new work in sqm 26.25 968.43 25,421.18 0.00

Construction of 6.75mx3.60m x 1.40m(h) Rain water harvesting

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

496 149 Sinking of tube well through D.T.H.Rig. 0.00 0.00

498 151 Lowering of PVC casing pipe inside bore. 0.00 0.00

501 154 Cutting slot in casing pipe for recharge of rain water Mtr. 50.00 417.13 20,856.50 0.00

502 155 Labour for packing gravel outside the tube well 0.00 0.00

504 157 Cost of washed gravel. Cum 4.70 1902.63 8,942.37 0.00

Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr

initial lift including rough dressing and breaking clods to maximum

505 158 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and 0.00 0.00

as per direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cement concrete

(1:4:8) with 4cm size hard granite metal including watering, curing,

507 160 conveyance of all materials to worksite, payment of royalty, taxes 0.00 0.00

etc all complete as per specification and direction of the Engineer in

Supplying all materials, labour, T&P and providing brick work with

K.B bricks having crushing strength not less than 75kg/cm² with

dimensional tolerance ± 8 percent in cement mortar (1:6) including

509 162 watering, curing, conveyance of all materials to worksite, payment 0.00 0.00

of royalty, taxes etc all complete as per specification and direction

of the Engineer in charge

Supplying all materials, labour, T&P and providing 12mm thick

cement plaster (1:4) on brickwork including watering, curing,

511 164 conveyance of all materials to worksite, payment of royalty, taxes 0.00 0.00

etc all complete as per specification and direction of the Engineer in

Supplying all materials, labour, T&P and providing cement punning

including watering, curing, conveyance of all materials to worksite,

513 166 payment of royalty, taxes etc all complete as per specification and 0.00 0.00

direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and smooth

centering and shuttering for R.C.C works including false work and

dismantling them after casting including conveyance of all materials

to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing reinforced

cement concrete work of M-25 grade with 20mm and down grade

black hard granite crusher broken stone chips including hoisting,

517 170 laying, watering, curing, conveyance of all materials to worksite, 0.00 0.00

payment of royalty, taxes etc all complete as per specification and

direction of the Engineer in charge

Supplying all materials, labour, T&P and providing M.S

reinforcement for R.C.C work including cutting, bending, binding,

and tying the grills and placing in position including cost of binding

519 172 wire 18 to 20 gauge, conveyance of all materials to worksite, Qntl. 0.68 10380.93 7,059.03 0.00

payment of royalty, taxes etc all complete as per specification and

direction of the Engineer in charge

520 173 Providing and filling filter media 0.00

Providing fitting and fixing M.S.grill,Jalli cover over the harvesty

525 178 BORE WELL (for 1 nos bore well) 0.00 0.00

Construction of 1 no production wells including scientific source

finding through consolidated and unconsolidated rock with down the

526 179 hamer drilling rig or combination rig with pvc pipe and installation of 0.00 0.00

submersible pump set with all acessories

Labour for drilling a perfectly vertical bore hole of specified dia for a

specified depth below ground level through consolidated and

unconsolidated rock with down the hole hammer drilling rig or

combination rig as required to suit the site condition as per the

direction of the engineer in charge including use of own rig with its

accessories ,tools and plant and consumables etc for lowering of

200mm/150mm dia G.I.P.V C/M.S casing pipes for housing fitted

with socket and with or without well screen as for the necessity for

soft ,medium,hard and boulder formation( G.I/P.V.C/M.S casing

pipes if required to prevent collapse of overburden is to be provided

by the contractor including lowering and withdrawing after

completion of the tube well) 200mm dia to 400mm dia in overburden

portion including packing of gravel supplied by the contractor for

400mm dia bore only

528 181 Drilling of 200mm dia bore 0.00 0.00

530 183 Drilling of 150mm dia bore 0.00 0.00

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Lowering the following size of G.I/P.V.C/M.S housing pipes with or

without slotted pipes as per the necessity form ground level up to

45.00m depth and fitted and fixed up in perfectly vertical position

including cutting and threading of pipes and dotted pipes and

532 185 supplying and fixing all jointing materials, tools and plant etc all 0.00 0.00

complete and keeping the top of casing pipe threaded including

plugging tube wells to prevent entry of foreign materials

533 186 Lowering of 200mm dia P V C casing pipes 0.00 0.00

Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having

threads in accordance with DIN 2999 part-1/DIN-42225 PART-II

specification length of pipe (laying length) will be 3 mtrs.The pipes

shall be supplied with both external threaded with free socket. The

pipe having external thread at one end i.e. female & or belled end .

The female end having internal thread is to be belled in order to

535 188 accept the male end while jointing pipes with a bore threading shall 0.00 0.00

be provided with a greave at the roof of the male thread

accomodate flexible PVC/Rubber 'O' ring to make the joint water

tight color of the pipe shall be blue The name of the manufacture

along with batch.No class of pipe shall be stranded legibly of each

Supplying all materials, labour, T & P and providing sanitary sealing

by cement concrete grouting of annular space around GI/PVC/MS

537 190 housing pipe upto 5m below ground level (as per drawing) to plug EACH 2.00 1384.97 2,769.93 0.00

the bore hole excluding cost of cement all com

Cleaning & developing the tube well with supply of compressor

worked till clear & adequqte discharge is obtained from the tube well

538 191 including supply & use of all necessary equipment & labour as per 0.00 0.00

directin of the Engineer in charge

Supplying all materials, labours, T&P and providing fitting & fixing

submersible pump with squirrel cage induction type submersible

type submersible electric motor to run on 3 phase /1 phase line

voltage ranging from 320 volt to 450 volt conforming to Si 8034/89

with following specifications with suitable control panel ,jointing with

GI/PVC/HDPE pipes,electrification,testing, commissioning ,trial

running, conveyance of all materials to worksite , payment of taxex

etc all complete as per specification & direction of the Engineer in

2HP Single phase 3 stage vertical/Horizontal submersible pump

541 194 set at head renge of 60 mtr with discharge capacity 200 L P.M with EACH 2.00 19423.98 38,847.96 0.00

outlet dia 32 mm.

543 196 40mm dia steel short piece EACH 4.00 238.36 953.44 0.00

547 200 20 mm dia rigid UPVC pipes for cable MTR 120.00 8.14 977.04 0.00

548 201 Steel ropes with cover MTR 70.00 31.51 2,205.42 0.00

549 202 Labour charges for lowering including transportation EACH 2.00 2360.00 4,720.00 0.00

Supplying all materials ,labour, T&P and providing and fixing to wall

or celling and floor HDPE pipes and pipe fiting conforming to IS:

4984/2000(10KGF/SQCM) of the following nominal bore with

550 203 clamps & joining by Fusion welding method including testing making 0.00 0.00

good the wall celling & floor all complete as per specificaations 7

direction of the engineer in charge

552 205 Borewell Chamber. 0.00 0.00

Supplying all materials, labour, T&P and constructing Bore well

protection chamber of the inside size 650x650x1000hight with

cement concrete (1:3:6) using 40mm size hard granite metal on

foundation, 1st class Fly ash brickwork in cement mortar (1:3), with

base cement concrete (1:2:4) using 12mm size h.g

chips,12mmthick cement plaster (1:4) inside and outside, R.C.C

553 206 cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in Each 2.00 14075.63 28,151.26 0.00

excavation in all kinds of soil and refilling the cavity around the

chamber including watering, curing, conveyance of all materials to

worksite, payment of royalty, taxes etc all complete as per approved

specification and direction of the Engineer in charge.

554 Sub-Total of Plumbing Works 1,71,52,572.80 19,97,277.68

555 Electrical Works 0.00 0.00

556 1 Sub-Head I (modular Wiring Items) 0.00 0.00

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Recessed wirring to light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI

marked with 20 mm dia HMS FRLS PVC conduit ISI marked

6A modular type (flame retradant type) switch ISI marked and

ceiling rose ISI marked of modular type G.I box with metallic cover

plate (both side) ( flame retradant type) of suitable size, modular

box with 1.5 sq. Mm FRLS PVC insulated single core multistandard

copper conductor as earth wire including all accessories and

557 2 connection as per direction of Engineer -in -Charge. . All the 0.00

switches & sockets should be warrantied for a replacement period

of 2 years against defects with ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of product

& to avail free after sales service within warranty period for

acceptance of materials.

Supplying ,fixing of 6A Plug on the same board in existing switch

board with complete fitting by 01 no of 6A switch & socket (modular

type)( ( flame retradant type)) & other required accessories of ISI

marked as approved as per direction of Engg. -in -Charge

.(Maximum 02 nos point in one circuit).All the switches & sockets

561 6 should be warrantied for a replacement period of 2 years against Nos 100.00 231.28 23,128.00 0.00

defects with ncessary test report & Warrnaty certificate to be

submitted to the department for genuinity of product & to avail free

aftersales service within warranty period for acceptance of

Supplying,fixing of 6A Plug on the separate board with complete

fitting by 01 no of 6A switch & socket(modular type)( ( flame

retradant type)) with suitable size modular box & cover(anti

bactorial & falme retradant type) including supplying of all required

accessories of ISI marked as approved as per direction of engg-in-

charge.(Maximum 02 nos point in one circuit).All the switches &

562 7 sockets should be warrantied for a period of 2 years against Nos 215.00 645.46 1,38,773.90 0.00

manufacturing defects against which ncessary test report &

Warrnaty certificate to be submitted to the department for genuinity

of product & to avail free aftersales service within warranty period

for acceptance of materials.

Supplying,fixing of 1x16A Plug on the separate board with

complete fitting by 01 no of 16A switch & socket(modular type)((

flame retradant type)) with suitable size modular box & cover( flame

retradant type) including supplying of all required accessories of

ISI marked as approved as per direction of engg-in-charge.. (For

equipement power)All the switches & sockets should be warrantied

for a replacement period of 2 years against defects with ncessary

test report & Warrnaty certificate to be submitted to the department

for genuinity of product & to avail free aftersales service within

warranty period for acceptance of materials.

Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with

complete fitting by 01 no of 16A+1 no 6A switch & socket(modular

type) ( ( flame retradant type) with suitable size modular box &

metallic cover plate (both side)(anti bactorial & falme retradant

type)including supplying of all required accessories of ISI marked

as approved as per direction of engg-in-charge. (For equipement

power)(Maximum 02 nos point in one circuit).All the switches &

sockets should be warrantied for a replacement period of 2 years

564 9 against defects with ncessary test report & Warrnaty certificate to Nos 6.00 1467.92 8,807.52 0.00

be submitted to the department for genuinity of product & to avail

free aftersales service within warranty period for acceptance of

Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with

complete fitting by 01 no of 16A+3 nos 6A switch &

socket(modular type) ( ( flame retradant type) with suitable size

modular box & metallic cover plate (both side)(anti bactorial & falme

retradant type)including supplying of all required accessories of ISI

marked as approved as per direction of engg-in-charge. (Maximum

02 nos point in one circuit).All the switches & sockets should be

warrantied for a replacement period of 2 years against defects with

ncessary test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free after sales

service within warranty period for acceptance of materials.

2 nos single core 1.5 sq. mm copper wire for phase and neutral and

01 no of single core 1.5 sq. mm copper wire for earth continuty

566 11 conductor. In 20 mm dia non metallic heavy duty conduit (LDB to Mtr 3850.00 185.26 7,13,251.00 0.00

LSB/LIGHT CKT)(2X1.5+1X1.5)

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

567 12 core cable in recessed HMS FRLS PVC conduit of mentioned Mtr 7000.00 201.78 14,12,460.00 0.00

size as required as per direction of Engg.-in-Charge.

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

568 13 core cable in recessed HMS FRLS PVC conduit of mentioned Mtr 4450.00 221.84 9,87,188.00 0.00

size as required as per direction of Engg.-in-Charge.

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

569 14 core cable in recessed HMS FRLS PVC conduit of mentioned mtrs 3900.00 259.60 10,12,440.00 0.00

size as required as per direction of Engg.-in-Charge.

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable in recessed HMS FRLS PVC conduit of mentioned

size as required as per direction of Engg.-in-Charge.

4 nos single core 6 sq. mm copper wire for phase and neutral and 02

570 15 nos of single core 4 sq. mm copper wire for earth continuty conductor in Nos 1250.00 374.06 4,67,575.00 0.00

32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/Medical

equipement) (4X6+2X4)

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable in recessed HMS FRLS PVC conduit of mentioned

size as required as per direction of Engg.-in-Charge.

4 nos single core 10 sq. mm copper wire for phase and neutral and 02

571 16 nos of single core 6 sq. mm copper wire for earth continuty conductorin Nos 1250.00 523.92 6,54,900.00 0.00

32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO

TPN BDB power) (4X10+2X6)

Supplying, installation, of exhaust fan of heavy duty 300 mm sweep

(Make-Equievalant higher model with 5 star rated &

model A catagory ISI marked as approved ) of exhaust fan in Nos 6.00 738.68 4,432.08 0.00

the existing wall, including fixing & conntection as required as per

direction of Engg.-in-Charge. Replacement Warranty will be 5 years.

Supply and fixing CALL bell (Ding dong type) /Buzzer on the

existing switch box/cover.as required as per direction of Engg.-in-

Charge.All the Components should be warrantied for a replacement

period of 2 years against defects with ncessary test report & Warrnaty

573 18 certificate to be submitted to the department for genuinity of product & Nos 10.00 251.34 2,513.40 0.00

to avail free aftersales service within warranty period for acceptance of

S/F of Bakelite angle holder/batten holder of ISI marked conforming to

IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge

.All the Components should be warrantied for a replacement period of 2

years against defects with ncessary test report & Warrnaty certificate to

574 19 be submitted to the department for genuinity of product & to avail free EACH 100.00 88.50 8,850.00 0.00

aftersales service within warranty period for acceptance of materials.

575 20 Sub-Head II (Light fitting Fixture & Fan)

Supplying, installation, of exhaust fan of heavy duty 300 mm sweep

1400 rpm with louvers of exhaust fan in the existing wall, including

576 21 fixing & conntection as required as per direction of Engg.-in-Charge. Nos 50.00 3717.00 1,85,850.00

Replacement Warranty will be 2 years.

Supplying, installation, of exhaust fan of heavy duty 380 mm sweep

1400 rpm with louvers of exhaust fan in the existing wall, including fixing

577 22 & conntection .as required as per direction of Engg.-in-Charge. Nos 10.00 4570.14 45,701.40

Replacement Warranty will be 2 years.

Supplying, installation, testing and commssioning of 1200 mm

sweep white/milky colour BLDC ceiling fan with aluminium blades

having wattage not more than 28W and air delivery ≥215m3/min

including wiring the down rod of standard length (upto 30 cm) with 1.5 sq

578 23 mm PVC insulated, copper conductor, single core cable etc. as required as Nos 175.00 4394.32 7,69,006.00

per direction of Engg.-in-Charge,Replacement Warranty will be 4 years..

.(With fan Regulator)

SITC of energy efficient LED tube light fittings with decorative

alluminium batten and LED tube light having power rating not more

than 20 watt and lumen output not less than 2000 lumen complete

with electronic driver and all other accessories with diffuser having 2

579 24 years warranty i/c connection etc as required as per direction of Engg.-in- Nos 290.00 859.04 2,49,121.60

Charge. The luminaire should be Replacement Warranty will be 2 years .

SITC of Sleek LED 10 watt mirror light fitting with extruded

polycarbonate housing,High optically efficient diffuser,above wash

basin complete with all accessoriesetc. directly on wall, including

580 25 connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single Nos 60.00 868.48 52,108.80

core cable and earthing etc. as required as per direction of Engg.-in-

The luminaire should be Replacement Warranty will be 2 years

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Supplying and fixing extra conduit down rod of 20 cm length G.I.

pipe 15 mm dia, heavy gauge including painting etc. as requiredas

required as per direction of Engg.-in-Charge .

(Note : More than 5 cm length shall be rounded to the nearest 10

cm and 5 cm or less shall be ignored)of ISI mark as approved.

Supplying and fixing of Energy efficient surface /recess

mounted square /round shape 18 W LED luminaire of dimension of

consists of white powder coated , die-cast Alluminium housing

with high quality frosted diffuser for glare-free uniform lighting

distribution with wattage not more than 18 watt and lumen output of

1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD

582 27 less than 10%, with electronic driver, internal surge protection of 3 Nos 200.00 1817.20 0.00 3,63,440.00

KV , L70 B50: 50000 hrs and all other accessories suitable for

operation on 220 V to 240 V supply as required as per direction of

Engg.-in-Charge.The luminaire should be Replacement Warranty

will be 5 years

583 28 BDBS,DB,AC DB,FLOOR PANELS,MCBS 0.00 0.00

Supplying and fixing of following mentioned way, three pole/single

pole and neutral, sheet steel,double door MCB distribution board,

415 volts/240 volts shall be as per IEC 61439-3,integrated door

earthing system offering additional safety to the user,High quality

polyurethane Gasket,the box and cover shall be fabricated to

withstand IK09,the DB should be properly pre-treated with 7 tank

process and duly powder coated, phosphatized with powder coated

584 29 finish, on surface/recess, complete with terminal blocks,with

suitable size FR PVC insulated copper conducter up to terminal

blocks, tinned copper busbar, neutral busbar, earth bar, din bar as

per direction of Engg.-in-Charge. The Distribution boards should be

Replacement Warranty will be 3 years.

4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC

61439-3 suitable for Flush mounting and Surface mounting with

100A Copper Bus Bar for each phase, with neutral Bus bar, Earth

Bar & Cable ties for cable management, prefitted masking sheet,

IP43-IK09 with metal door Warranty on DB is 3 years

Supply and fixing of 12 way DD single pole and neutral sheet steel

MCB distribution board 250V on surface/recess complete with

tinned copper bus bar, neutral bus bar, earth bar, din bar,

586 31 detachable gland plate, interconnections, phosphatized and powder Nos 16.00 2313.98 0.00 37,023.68

painted including earthing etc. as required (but with out MCB/

RCCB/ Isolator) Warranty on DB is 3 years

2+4 way MCB Enclosure DB (GLAZED door)(only each EM.

587 32 CONNECTION UPS LOAD)Warranty on DB is 3 years Nos 6.00 1993.02 0.00 11,958.12

Supplying and fixing 20 amps rating, 240 volts, C series,10KA

breaking capacity, Double poles MCB of in the existing MCB DB

complete with connections as per direction of Engg.-in-Charge. .Warranty

on MCB is 3 years.

Supplying and fixing6-32 Amps rating, C series,10KA breaking

capacity,SP, 240 volts, MCB . in the existing MCB DB complete with

connections, testing and commissioning etc. as required as per direction

of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be

Supplying and fixing 40 Amps rating,C series,10KA breaking

capacity, 4P, 415 volts, RCCB 30mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

required as per direction of Engg.-in-Charge. . The RCCB should

be Replacement Warranty will be 3 years.

Supplying and fixing 40 amps rating, 415 volts, C series,10KA

breaking capacity, FOUR poles MCB in the existing MCB DB

591 36 complete with connections as per direction of Engg.-in-Charge. Nos 16.00 3499.88 0.00 55,998.08

.Warranty on MCB is 3 years.

Supplying and fixing 63 Amps rating,C series,10KA breaking

capacity, 4P, 415 volts, RCCB 30mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

required as per direction of Engg.-in-Charge. . The RCCB should

be Replacement Warranty will be 3 years.

Supplying and fixing 63Amps 4P 415 volts MCB in the existing

MCB DB in the existing MCB DB complete with connections as per

direction of Engg.-in-Charge..Warranty on MCB is 3 years.

Supplying and fixing 25 Amps rating,C series,10KA breaking

capacity, 2P, 240 volts, RCCB 30mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

required as per direction of Engg.-in-Charge. . The RCCB should

be Replacement Warranty will be 3 years

595 40 (Earthing) INSTALLATION 0.00 0.00

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Supplying,installation,testing & commissioning of materials and

installation of GI earth plate 600mmx600mmx6mm thick ISI marked

with G. I. nut bolts & washers including cost of burnt wood

charcoal, salt, foreign soil, water pouring arrangements, brick

596 41 masonary enclosure on top with removable RCC cover complete Nos 3.00 7670.00 23,010.00 0.00

with labour for excavation of pit in all kinds of soil & rock as required

and as per direction of Engineer-in-charge.The entire earthing

system should be Replacement Warranty will be 2 years

Providing and fixing 25mm x 5 mm GI strip on surface or in recess

597 42 for connections etc. as required as per direction of Engg.-in-Charge. Mtr 151.00 177.00 26,727.00 0.00

Providing and fixing 50mm x 6 mm GI strip on surface or in recess

598 43 for connections etc. as required as per direction of Engg.-in-Charge. Mtr 51.00 377.60 19,257.60 0.00

CABLING AND END TERMINATION MAIN AREA 0.00 0.00

Supplying of one number PVC insulated armoured and PVC

sheathed XLPE property AL. conductor power cable of 1.1 KV

600 45 grade of following size cables as per direction of Engg.-in-Charge. 0.00 0.00

4core x 16 sq mm (BDB LIGHT /POWER,EQUIPEMENT,street light

604 49 4 core x 4 sq mm (for small power) Mtr 62.02 103.69 0.00 6,431.06

3.5core x 50 sq mm (To FDB LIGHT / power BDB/UPS PANEL)

606 51 LAYING OF CABLE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size not exceeding 25 SQ. MM direct in ground in the trench

in one horizental formation including excavation ,sand coushing

protection covering and refilling the trench etc as required as per

direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM

direct in ground in the trench in one horizental formation including

excavation ,sand coushing protection covering and refilling the

trench etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM

direct in ground in the trench in one horizental formation including

excavation ,sand coushing protection covering and refilling the

trench etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size not exceeding 25 SQ. MM direct in ground in the

610 55 EXISTING PIPE etc as required as per direction of Engg.-in - Mtr 51.00 67.26 3,430.26 0.00

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM

611 56 direct in ground in the EXISTING PIPE etc as required as per Mtr 40.00 90.86 3,634.40 0.00

direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

612 57 grade size not exceeding 25 SQ. MM in open duct etc as required Mtr 44.00 53.10 2,336.40 0.00

as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct

613 58 in ground in the EXISTING PIPE etc as required as per direction of Mtr 22.00 73.16 1,609.52 0.00

Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size not exceeding 25 SQ. MM in surface with shaddle and

614 59 screw etc as required as per direction of Engg.-in -charge. Mtr 61.00 121.54 7,413.94 0.00

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size not exceeding 120 SQ. MM From 25 SQ. MM in

615 60 surface with shaddle and screw etc as required as per direction of Mtr 95.00 187.62 17,823.90 0.00

Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size not exceeding 400 SQ. MM From 120 SQ. MM in

616 61 surface with shaddle and screw etc as required as per direction of Mtr 15.00 189.98 2,849.70 0.00

Engg.-in -charge.

Supplying and making end termination with brass double

617 62 compression gland and aluminium lugs for following mentioned size 0.00

cable.as per direction of Engg.-in-Charge.

Providing,fixing and laying of following dia G.I. pipe (medium class)

622 67 in ground complete with G.I fitting incl. trenching(75 mm depth)and 0.00 0.00

refilling as per direction of Engg.-in-Charge.

Providing,fixing and laying of fallowing dia HDPE pipe (medium

624 69 class) in ground complete with fitting incl. trenching(75 mm 0.00 0.00

depth)and refilling as per direction of Engg.-in-Charge.

626 71 MAIN CONTROL PANEL AT GF 0.00 0.00

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

S/I/T&Commissioning of CPRI tested LT indoor floor mounted

cubical type electrical main panel (for both light and power circuit)

made out by 2mm CRCA steel sheet duly derusted & painted by

siemens gray powder cote paint fallowed by 9 tank acid treatment is

designed as G.A drawing as per direction of Engg.-in-

627 72 Charge.Warrentee period of replacement of panel & accessories Set 1.00 505167.44 0.00 5,05,167.44

must be 3 years & compelete test certificate must be submitted

along with panel board including component list.60X10MM Separate

Aluminium Earth bus bar should be installed.

In commer-1-01 number of 630A 4P Icu=100%Ics,36Ka LSIG

628 73 MCCB with micro processor based release Electrical locking for 0.00 0.00

normal & DG(FROM 250 KVA TRANSFORMER)

In commer-2-01 number of 200A 4P Icu=100%Ics,36Ka LSIG

MCCB with micro processor based release Electrical locking for

629 74 normal & DG & 200A Manual changeover switch(FROM 82.5 KVA 0.00 0.00

Busbar-1&2 04 numbers of 500Amps copper busbar with

1.6A/SQ.MM current carring capacity. busbar duly sleeved by color

630 75 coated PVC sleeve & supported by suitable size DMC insulator. 0.00 0.00

Out going- 08 numbers of 100A 4P MCCB,16KA breaking capacity,C

631 76 series

Out going- 16 numbers of 63A 4P MCB16KA breaking capacity,C series

Out going- 8 numbers of 32A 4P MCB16KA breaking capacity,C series

Outgoing-08 number of 125A 4P Icu=100%Ics, LSIG MCCB with

Outgoing-01 number of 200A 4P Icu=100%Ics, LSIG MCCB with

Instrument- (i) 03 numbers phase indicating lamp with toggle switch &

(ii) 02 set of digital type multifunction meter with CT for

637 82 voltage,current,frequency,PF,THD indication with RS 485 0.00 0.00

COMPACTIVITY FOR bms data.

(iii) 1 no. 3P+N 40kA/POLE type 1+2 SPD with 63A rating,10KA

638 83 breaking capacity ,4P MCB

FLOOR PANEL POWER AT EAC FLOOR,SERVICE,LIFT

S/I/T&Commissioning of LT indoor floor mounted cubical type

electrical main panel (for both light and power circuit) made out by

2mm CRCA steel sheet duly derusted & painted by simens grey

powder cote paint is designed as G.A drawing. (FOR ALL MAIN

CONNECTED LOAD) BUILDING LIGHT)as per direction of Engg.-in-Charge.

Warrentee period of replacement of panel & accessories must be 3

years & compelete test certificate must be submitted along with panel

board including component list.Type 2 SPD 40ka shall be installed in the

incomer. 20X10MM Separate Aluminium Earth bus bar should be

In commer- 01 number of 125 Amps 4P MCCB

,Icu=100%Ics, LSIG MCCB with TMR release

Busbar-04 numbers of 200Amps copper busbar with 1.6A/SQ.MM

current carring capacity. busbar duly sleeved by color coated PVC

642 87 sleeve & supported by suitable size DMC insulator. (for outgoing) 0.00 0.00

Out going- (i) 63A 4P MCB 10KA breaking capacity,C series

643 88 05 NOS FOR POWER BDB orPOWER/BDB 0.00 0.00

Out going- (ii) 02 nos 40A 4P MCB 10KA breaking capacity,C

644 89 series LIGHT BDB AC IDU BDB/LIGHT BDB 0.00 0.00

Instrument- (i) 03 numbers phase indicating lamp with

toggle switch & HRC fuse.

(ii) 01 set of 0-125Amps Ammeter with CTS.(DIGITAL) 0.00 0.00

647 92 (iii) 01 set of 0-500 voltmeter .(DIGITAL) 0.00 0.00

648 93 FLOOR PANEL LIGHT AT EACH FLOOR,SERVICE 0.00 0.00

S/I/T&Commissioning of LT indoor floor mounted cubical type

electrical main panel (for both light and power circuit) made out by

2mm CRCA steel sheet duly derusted & painted by simens grey

powder cote paint is designed as G.A drawing. (FOR ALL MAIN

CONNECTED LOAD) BUILDING LIGHT)as per direction of Engg.-in-Charge.

Warrentee period of replacement of panel & accessories must be 3

years & compelete test certificate must be submitted along with panel

board including component list.Type 2 SPD 40ka shall be installed in the

incomer. 20X10MM Separate Aluminium Earth bus bar should be

In commer- 01 number of 63 Amps 4P MCCB .Icu=100%Ics,

LSIG MCCB with TMR release

Busbar- -04 numbers of 100Amps copper busbar with

1.6A/SQ.MM current carring capacity. busbar duly sleeved

by color coated PVC sleeve & supported by suitable size

DMC insulator. (for outgoing)

Out going- (i)32A 2P MCB 10KA breaking capacity,C series

652 97 02 NOS FOR L BDB EM. POWER BDB 0.00 0.00

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Out going- (ii) 05 nos 40A 4P MCB 10KA breaking capacity,C

Instrument- (i) 03 numbers phase indicating lamp with

toggle switch & HRC fuse.

(ii) 01 set of 0-100Amps Ammeter with CTS.(DIGITAL)

(iii) 01 set of 0-500 voltmeter .(DIGITAL)

CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER

Supplying,fixing of perforated cable trays with horizental & vertical

bends,reducers ,tees,crossover,brakets & other accessories ar

requited confirming to IS-IEC -61537 ,the cable tray shall be

galvanised for corrosion protection confirming to DIN EN 10346/ISO

1461. Size 60mm(H) x 300mm(W) .The Load bearing capacity of

the Cable Trays should be minimum of 104.8Kg/meter at the span

of 1.5Meter as per UL specifications as required as per direction of

Engg.-in-Charge.

660 105 Subhead- 1 (Lan System) 0.00 0.00

Supply & fixing of RJ-45Jack of Category 6 with Dual-port British-

661 106 style Face plate 86x86 mm with Curveture and wall mount box NOS 8.00 1117.46 0.00 8,939.68

Supply & fixing of Cat6 24 Port Loaded Patch Panel NOS 3.00 10827.68 0.00 32,483.04

Supply & Installation of Cat6 Factory crimpped moulded patch

Supply & Installation of Cat6 Factory crimpped moulded patch

Supply and installation of 24 Port Layer2 Giga (10/100/1000BaseT)

PoE Switch with 4 x 1Gig SFP Port , Switching Capacity 56

Gbps, Throughput 41.7 Mpps ,Management Port 1 x RJ 45

Console port ,PoE power budget 270 Watt, Switch should support

665 110 IEEE 802.3af & IEEE 802.3at standard ,MAC Address 16K , NOS 2.00 48026.00 0.00 96,052.00

Jumbo Frame 12K ,Temperature Working 0°C~50°C, storage -

40°C~70°C, Power Supply AC: 100~240VAC.Digisol Model No. DG-

GS1528HPE-P/Cisco/HP or equivalent.

Supply & Installation of 9U/500Wall Mount Rack with FAN, PDU,

Cable manager and H/W Pkt.

Supplying and fixing of following sizes of medium class PVC FRLS

conduit ISI marked along with accessories in surface/recess

667 112 including cutting the wall and making good the same in case of 0.00 0.00

recessed conduit as required as per direction of Engg.-in-Charge .

669 114 Subhead- 3 (IP-CCTV System) 0.00 0.00

Supply, Installation, Testing & Commissioning of Full High Definition

5MP( 2880 x 1624) resolution vandal proof dome/bullet camera,

1/3" Progressive Scan CMOS Sensor, IR Cut mechanical Filter for

True Day & Night vision, Support dual streams, Onvif supported,

670 115 IP66 Weather proof outdoor enclosure, Inbuilt Smart IR LEDs with NOS 30.00 14750.00 0.00 4,42,500.00

intensity control, IR 30 mtr, H.264 / H.265, Supports android and

iOS APP for Smart phone and tablets, with Inbuilt audio, -10°C to +

50°C, CE, FCC, RoHS .

Supply , Installation, testing , commissioning of 32 Channel NVR

with 4 SATA; 384 Mbps incoming bandwidth, Up to 8 Megapixels

Resolution Display and Recording, H.265 video compression

technology with real time encoding, Full function CMS (Central

monitoring software) supported, Two way audio supported, Dual

streaming technology to encode recording stream and network

stream separately, Supports remote monitoring on Mobile Client

671 116 (Android, IOS), TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, NOS 2.00 90624.00 0.00 1,81,248.00

NTP, SMTP, Time/ Date, Alarm, Motion Detection & Exact Search

(accurate to second), Record Snapshot, FTP, Preset Calling, Email

notification supported, Manual/ Alarm/ Motion Detection/

Continuous,CE,FCC,RoHS).

672 117 Supply & Installation of surveliance 8 TB HDD . NOS 4.00 22840.08 0.00 91,360.32

Supply & installation of 55'' IPS Ultra HD AI for 24x7 application

Supply and Laying of cat6 23Awg UTP cable through existing

Supplying, installation, testing & commissioning of digital audio

676 121 amplifier 1000 Watt, 25V rms operating at 240 Volt AC Supply NOS 1.00 85328.16 0.00 85,328.16

complete as required.

Supplying, installation, testing & commissioning of 8 zone voice

677 122 alarm controller with USB MP3 am/fm included 8 zone button NOS 1.00 143960.00 0.00 1,43,960.00

paging station and microphone.

Supplying, installing, testing and commissioning of 12 Watt wall

mounted speakers with built in line matching transformer, grill flush

678 123 mounting type in side the utility rooms.Make. NOS 16.00 4130.00 0.00 66,080.00

Honeywell/Bose/Bosch/JBL

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Supplying and drawing of speaker cable Single pair, 2-core, 1.5

sqmm in existing conduits.

680 125 LIGHTENING PROTECTION

681 126 Item Details 0.00 0.00

Lightning Protection :- Supply of 8 mm Aluminum Round

682 127 Conductor.Tested as per IEC 62561. as per direction of engineer in charge. Mtr 270.00 175.82 0.00 47,471.40

Supply of Roof conductor holder for parapet- Polyamide Conductor

holder. With M8 female thread or diameter 7mm, M8 Screw to

connect the conductor holder.Weather and temperature resistant

683 128 from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter No 171.00 60.18 0.00 10,290.78

distance.Tested as per IEC 62561. as per direction of engineer in

Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form

B1. Closed form with bottom. Filling weight 1Kg (frost-resistant

684 129 concrete). Sleeve from polyethylene, black @ 1 meter distance. No 8.00 234.82 0.00 1,878.56

Tested as per IEC 62561.

Supply of Connector: For T cross and parallel connectors. Quick

installation using hexagonal bolt M10X30 high-grade hot dip

685 130 galvanised. Tested as per IEC 62561.(2nos/expansion piece ). No 7.00 239.54 0.00 1,676.78

Supply of 1 mtr vertical air terminal with mounting accessories

on the flat surface to meet the requirements of IS/IEC 62305.

Tested for Electrical , mechanical and chemical as per IEC

62561. Tested for 100kA lightning current.

Supply of Vertical air terminal with accessories:Providing of Air

as per IS-IEC -62305 part-3. Nominal size Ø10/16 mm aluminium

2 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN

48801) Suitable for high wind load. Tested as per IEC 62561.

Supply for Providing of Stand for Fang Fix system 16 kg with base

clamp ,made up of frost resistant concrete and clamp tested upto

100KA lightning current .

Supply for Providing of Stand for Fang Fix system 16 kg made up of

resistant concrete.

Supply of Test Joint (Folding Clamp) suitable to connect 8mm round

conductor and max by 30x3 mm GI strip as specified in drawing and

directed by Engineer. Tested for 100kA lightning current.

Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr

For Test Joint .Internal dimensions: 100x100x48 mm

Supply of Galvanised Steel Flat 30X3 mm thickness from earth

692 137 electrode directly in ground as required. Flat conductor Hot Dipped Mtr 83.00 318.60 0.00 26,443.80

Galvanized. Tested as per IEC 62561.

Supply for Providing of Cross connector for Flat: Suitable for 30mm

693 138 Galvanised steel strip. Installed with 4 nos of hexagonal plate. No 7.00 297.36 0.00 2,081.52

Tested for 100kA lightning current.

Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x

22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip

694 139 galvanised steel, Bottom section from polyamide, black. Tested as No 8.00 307.98 0.00 2,463.84

Supply for Providing of Plastic Corrosion Protection strip: Approx

695 140 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical No 4.00 1037.22 0.00 4,148.88

Supply of UL Listed maintenance free ,Low carbon copper coated

earth rod of 3 metre electrode having diameter of 17.2 mm with

696 141 copper coating thickness of 250micron tested as per IEC 62561-2 No 5.00 4935.94 0.00 24,679.70

Supply of universal clamp made of SS to connect rod with flat

Supply of Earth conductivity enhancing mineral compound shall be

698 143 of 25kg/pit tested as per IEC 62561-7,TCLP tested No 5.00 3348.84 0.00 16,744.20

Supply of The above arrangements shall be provided with Heavy

duty earth champer of 5000kg load bearing capacity to ensure the

safety of earthing system

Installation of The above arrangements including all accessories as

700 145 per Direction of Engg. In charge. Job 1.00 41300.00 0.00 41,300.00

701 146 16 PASSENGER-cum-stretcher LIFT WITH WIRRING(1.1)

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Supply,Installation, Testing & Commissioning of of 16 Passenger-

cum-stretcher lift gearless with Machine room Capacity,Elevator

G+5 Floors (Shaft size should not be less than-2300mm(Left to

right)x2500mm(Front to back)) (Min. Car size-1300mmx2000mm,

car opening should not be less than 1000mm) with ACVVVF

drive/Control for constant load of 1088 kg ARD 1.25 MPS, SS

honeycomb interior ,2hr fire rated door with simplex operation

without attendant car position indicators,battery operated alarm

bell & emegency light,SS honeycomb finish door finished car

interior, recess Granite flooring ,power operated centre opening

automatic sliding SS honeycomb finish doors for car entrance &

702 147 hoist way entrance etc .All SS materials shall be of grade SS-304 JOB 1.00 2655944.00 26,55,944.00

with thickness not less than 1.6mm. Machine beams,buffer

support channels,facia plate including sills pit ladder metal screen

in Elevator pit etc.as per specifiaction including cost of (i)Overload

detection,(ii)Voice announcement,(iii) Intercom,(iv)Braille Buttons

with all Civil & Electrical works required for installation of Elevator

in the existing lift well and machine room,scaffolding ,floor cutting

including Fireman's switch complete in all respect.The Elevator

should be suitable for physically handicapped person.

703 148 8 PASSENGER LIFT WITH WIRRING(1.1) 0.00 0.00

Supply,Installation, Testing & Commissioning of of 8 Passenger lift

gearless with Machine room Capacity,Elevator S+7 Floors (Shaft

size should not be less than-1900mm(Left to right)x1900mm(Front

to back)) (Min. Car size-1300mmx1100mm, car opening should not

be less than 800mm) with ACVVVF drive/Control for constant load

of 544 kg ARD 1.25 MPS SS honeycomb interior ,2hr fire rated

door with simplex operation without attendant car position

indicators,battery operated alarm bell & emegency light,SS

honeycomb finish door finished car interior, recess Granite

flooring ,power operated centre opening automatic sliding SS

honeycomb finish doors for car entrance & hoist way entrance etc

.All SS materials shall be of grade SS-304 with thickness not less

than 1.6mm. Machine beams,buffer support channels,facia plate

including sills pit ladder metal screen in Elevator pit etc.as per

specifiaction including cost of (i)Overload detection,(ii)Voice

announcement,(iii) Intercom,(iv)Braille Buttons with all Civil &

Electrical works required for installation of Elevator in the existing

lift well and machine room,scaffolding ,floor cutting including

Fireman's switch complete in all respect.The Elevator should be

suitable for physically handicapped person.

705 Sub-Total of Electrical Works 65,18,849.82 1,08,44,699.20

706 Firefighting Works 0.00 0.00

707 PUMPS AND APPURTENANCES 0.00 0.00

Portable Fire Extinguisher System Supplying, installation, testing and

commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878

made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI

marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose

708 1 & horn complete with initial gas charged with carrying handle & wall mounting Nos 1.00 146738.90 0.00 1,46,738.90

bracket as per direction of Engineer-in-charge.

SITC of FRLS,PVC outer sheateh, steel armoured, aluminium ,

709 2 1100v grade power cables with glands etc.The minimum size of the 0.00 0.00

cables shall as mentioned below,

Supply, installation, testing and commissioning of Floor/Wall

mounted sectionalised, front operated top entry dust and vermin

proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4

wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA

sheet, insulated busbar with heat shrienkable PVC sleeve, base

frame, complete with all accessories including interconnections,

earth bus etc as required comprising of One (1)- 63 Amp, 10

712 5 KA,TPN (Class-C) MCB with 3 Nos Phase indicating lamps with Set 1.00 44604.00 0.00 44,604.00

control fuse/ MCB, Digital Voltmeter with selector switch. DOL

starter with O/L and Single Phasing Preventor suitable for 7.5 HP

motor. ON/OFF indication lamps, Auto manual switch and ON/OFF

push button.as per direction of engineer in charge Control panel

for fire pumps for auto action.

713 6 PIPE & VALVES ETC. 0.00 0.00

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Supply,Installation,Testing & Commissioning of 'C' Class heavy duty

MS pipe (as per IS 1239 upto 100 mm NB and IS 3589 for above 100

mm 6.33mm thick) with flanges and fitting such as bends, tees,

reducers, rubber insertions and galvanized nuts and bolts of

following size on surface along wall / shaft with MS bracket,

714 7 suspended from ceiling/ beam with suspenders duly painted with 0.00 0.00

two coats of primer and finished with enamel paint of approved

colour laid through pipe or in trench after wrapping with hassen

cloth after applying coal tar primer as required as per direction of

Engineer-in- charge.

Providing, fixing, testing and commissioning of following size

manually operated hand lever type cast iron double flanged slim

seal wafer type Butterfly valves with EPDM iron disc as per IS-

13095 having pressure ratting PN -1.60 including fixing the same

with supply of required jointing materials like rubber insertion, MS

nuts & bolts, paint etc. and testing the joints with required water

pressure etc. all complete as per specification & direction of E.I.C.

Providing, fitting & fixing of following size cast iron double flanged

type dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with

ISI mark of pressure ratting PN-1.60 including fixing the same with

supply of required jointing materials like flanges, rubber insertion,

MS nuts & bolts, paint etc. and testing the joints with required

water pressure etc. all complete as per specification & direction of

Engineer-in-charge.

SITC of Gun metal chrome finished Ball valves with fittings of

screwed end type.

Supply,Installation,Testing & Commissioning of Pressure gauge of 0-

724 17 16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size Nos 6.00 1864.40 0.00 11,186.40

with all accessories as per direction of Engineer-in-charge.

Supply,Installation,Testing & Commissioning of Pressure Switch

with cut-off bronze ball valves with integral strainer & flare nut

(mixed ends) of suitable size with all accessories as per direction of

Engineer-in-charge.

Supply,Installation,Testing & Commissioning of stainless

steel strainer fabricated out of 1.6 mm thick stainless steel

726 19 sheet Y Stainer with 3 mm dia hloes with stainless steel

flange as required.

728 21 DOWN COMER SYSTEM

Supply,Installation,Testing & Commissioning of Stainless steel

Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single

headed , oblique type, as per IS :5290/93 and as per direction of

Engineer-in-charge.

Supply,Installation,Testing & Commissioning of SS short branch

730 23 pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 Nos 8.00 2808.40 0.00 22,467.20

and as per direction of Engineer-in-charge.

Supply,Installation,Testing & Commissioning of 63 mm NB and

15meter long RRL Fire Hose fitted with 63mm intstantaneous

731 24 stainless steel male & female SS coupling, complete by GI wire Nos 16.00 6926.60 0.00 1,10,825.60

binding for Internal Hydrant as per direction of Engineer-in-charge.

Providing supply & fixing of MS Hose Box for of suitable

size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr

long fire hose and a branch pipe, wall mounted type as per

direction of Engineer-in-charge.

Supply,Installation,Testing & Commissioning of Swinging pattern

wall fixing first aid hose reel made from MS sheet and waterways

and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long

with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I.,

complete with all accessories as per direction of Engineer-in-

Providing, fitting and fixing of C.I. 25 MM single air relief valve with

stop cock confirming to IS:14845/2000 with ISI mark for water

works purpose including fixing the same with hydrant riser

including testing & commissioning the system etc. all complete as

per approved specification & direction of Engineer-in-charge.

Non-Schedule Non-Schedule

Abs. Sr. Head Description of Item Unit Qnty. Schedule Rate Schedule Amount

Providing, fitting & fixing of 2-Way GM fire brigade connection

consisting of 63 mm dia instantaneous type male couplings with

built-in check valves, 150mm dia flanged outlet complete with

735 28 bolts, nuts and rubber insertions confirming to IS:904 with ISI mark Nos 2.00 6974.98 0.00 13,949.96

including testing & commissioning the system etc. all complete as

per apporoved specification & direction of EIC.

736 29 EXTINGUISHER SYSTEM

Supply,Installation,Testing and Commisioning of ISI marked

737 30 (IS:2878) Fire Extinguisher ,Carbon di-oxide type capacity 4.5kg Nos 25.00 9086.00 0.00 2,27,150.00

with all accessories (Ever safe/Fire shield)

Supply,Installation,Testing and Commisioning of ISI marked

738 31 (IS:2878) Fire Extinguisher ,ABC type capacity 6kg with all Nos 2.00 3851.52 0.00 7,703.04

accessories (Ever safe/Fire shield)

Fire buckets (FILLED WITH SAND) round bottom type enamel

painted, white inside & Red out side and Letter "FIRE" in black out

side and handle with mounting bracket.

740 33 FIRE ALARM SYSTEM

Supply, Installation,Testing & Commisioning of Microprocessor

based Addresable fire alarm control panel , fully networkable with

each loop capable of taking 99 devices, 8 line x 40 character alpha-

numeric liquid crystal display .The panel shall be soft addressable

type . The panel shall be able to give pin point location of all

fire/fault conditions. Further, the panel must be able to

automatically switch off respective control switches when ever any

alarm is triggered. The panel shall have integral SMF lead acid

batteries with sealed cells of 24 V capable of running for a

minimum of 8 hours with integral battery charger complete as

required and as per specification. The fire alarm panel shall be

suitable for software integration with BMS & PA system.

Supplying, installing, testing and commissioning of Addressable

Manual Call Point with back box.

Supplying, installing, testing and commissioning of Analogue

744 37 Addressable Loop powered Sounder with strobe light. No. 10.00 8190.38 0.00 81,903.80

Floor identification signage (i.e, GROUND FLOOR… ETC.,) at

each stair enclosure on every floor, indicating the floor number in

746 39 words, lettering size shall be 7.5cm with contrasting colour from Nos 10.00 1475.00 0.00 14,750.00

back ground. Size shall be 15cm * 60cm.

Fire Exit signage at each stair on every floor, indicating the

direction of fire exit, lettering size shall be 7.5 cm with contrasting

color from back ground. Size shall be 15cm x 45cm.

Providing and fixing in position the signage of " Fire Extinguisher "

748 41 to be fixed above the every extinguisher. Size 6" x 8" Nos 10.00 896.80 0.00 8,968.00

Providing and fixing in position the signage of " Fire Hydrant &

749 42 Hose Reel " to be fixed near the every fire shaft at all floors. . Size Nos 6.00 896.80 0.00 5,380.80

Providing and fixing the signages "Entry/Exit".Size-4"x12".

751 Sub-Total of Firefighting Works 0.00 17,01,772.40