REPAIRS TO JOINERY, ROOF, PLINTH PROTECTION, FLOORING, WALL TILING, SANITARY FITTINGS, PLASTERING AND SUNKEN FLOOR OF ZONE IV AT UMROI MIL STN UNDER GE UMROI

Amount

Demolition cement concrete (un-reinforced) of any descriptions, in Ground Floors (Floor Topping, Sub-base, etc.) not exc. 150mm thick, above or below Ground Level, and removed from site complete all as specified and directed

Material & Labour 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.

Material & Labour PCC 1:2:4 type B1, 40mm thick, using 20mm graded stone aggregate as in flooring and finished surface even and fair using extra cementcomplete all as specified and as directed.

Material & Labour 3 mm thick glass dividing strip and width of 38 mm for PCC flooring complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust complete all as specified and directed.

Demolition of stone slab and tiles laid, bedded and pointed in any mortar, of any description or thickness in floors, aprons and removed from site at distance complete all as specified and as directed.

Material & Labour screed bed or bedding layer of cement mortar (1:6) ,15 mm thick for laying floor finishes, complete all as specified and directed.

Material & Labour screed bed or bedding layer of cement mortar 1:4 10 mm thick for as in vertical surfaces such as skirting , dados etc, complete all as specified and as directed.

Supply & Fixing Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but n.exc 0.38 Sqm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

Supply & Fixing Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but n.exc 0.18 Sqm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed CM 1:4.(Note:15mm thick screed bed will be measured and paid separately)complete all as specified and as directed.

Material & Labour non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) are of each tiles exceeding 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slury and in coloured cement to match complete all as specified and as directed.

Supply & Fixing of glazed ceramic coloured/printed tiles 300x200x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match on verticle surface of wall complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water remove dust, debries/rubbish etc., complete all as specified and as directed.

Material & Labour Rendering 10mm thick in cement mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth,without using extra cement complete all as specified and as directed.

Material & Labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick walls or on concrete surfaces in two layers (10mm thick in 1st layer and 5mm thick in finishing layer) finished even and smooth without using extra cement with WPC @ 3%by weight of cement (for top layer only) complete all as specified and as directed (WPC will be measured and paid separately.)

Supply only integral WPC

Material & Labour 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement complete all as specified and as directed.

Materials and Labour for applying two coats of cement based paint over one coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

Material & Labour for Preparing newly Plastered surface of ceiling and applying three coats white wash complete all as specified and as directed.

Material & Labour for Preparing Newly Plastered Surfaces of internal Walls and applying Three Coats of white wash complete all as as specified and as directed.

Materials and Labour for applying two coats of oil bound distemper paint over one coat of primer on newly plastered surfaces including preparation of surfaces complete all as specified and directed.

Materials and Labour for complete removal of existing treatment from wall and applying two coats of oil bound distemper paint over one coat of primer including preparation of surfaces complete all as specified and directed.

Material & Labour for cement concrete type C2 1:3:6 (40mm graded aggregate), in surface channels and drains, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc.

Material & Labour PCC 1:2:4 type B - 1 ( using 20 mm graded crushed stone aggregate) as in coping, repairs over chajja, etc incl necessary formwork, weathering, slightly rounded or chamfered angles as directed.

Dismantling and breaking up drain pipes PVC Pipes set in cement mortar 100mm/75mm bore and removing from site complete all as specified and directed.

Supply & Fixing 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed.

Supply & Fixing 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed.

Supply & Fixing 110mm PVC (SWR) bends any radius, complete all as specified and directed.

Supply & Fixing 75mm PVC (SWR) bends any radius, complete all as specified and directed.

Dismantling wall and ceiling board any thickness including cover fillets and removing from site complete all as directed.

Material & Labour 4 mm thick non asbestos plain bldg board fixed to timber frame work in repairs with screws as in ceiling complete all as specified and as directed

Material & Labour 2nd class hardwood plain fillets, bullnosed, splayed, chamfered or rounded on one edge or face, wrought, secured with screws, area exc 6 sqcm but n.exc. 13 Sqcm, complete all as specified and as directed .

Material & Labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surface of any description n.exc 10cm width or girth complete all as directed.

Hacking out old broken glass ( any thickness, size, quality or description ) from metal frame incl punching or drilling out old glazing pins and providing fixing new one n,exc 0.5sqm each pane complete all as specified and as directed.

Supply & Fixing sheet glass ordinary quality 4mm thick glazing in square/ rectangle n,exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel etc complete complete all as specified and as directed.

Material & Labour 4mm thick figured glass,n,exc 0.50 sqm each pan, pin headed type and glazing with oil putty or aluminium beads fixed to steel etc complete all as specified and as directed

Material & Labour 2nd class hardwood plain fillets, square rectangular or traingular in section wrought, fixed with nails, area n exc 3 sqcm, complete all as specified and as directed

Material & Labour 2nd class hardwood plain fillets, square rectangular or traingular in section wrought, fixed with nails, in repair works, area n exc 3 sqcm, complete all as specified and as directed

Supply & Fixing in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed

Taking down chowkats or frame with shutter(without taking of shutter from the frame) exc. 1.50 Sqm but n exc 4 Sqm Each, complete all as specified and as directed.

Taking down chowkats or frame with shutter(without Taking Off Shutters from the Frame) , n exc. 1.50 Sqm Each, complete all as specified and as directed.

Taking down shutters of any description n. exc. 1.00 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc. 1.00 Sqm but n. exc. 2.00 Sqm each, complete all as specified and directed.

Supply & Fixing pressed steel door frame 125x60 mm with one or more rebated incl necessary fixing lugs hinges, hinges, lock strick plate, etc complete as specified and firected.

Supply & Fixing pressed steel door frame 105x60 mm with one or more rebated incl necessary fixing lugs hinges, hinges, lock strick plate, etc complete as specified and firected.

Material & Labour for PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in filling of pressed steel frame complete all as specified and as directed.

Cutting holes in brick walls, built in cement mortar for taking out or inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1as required in exc. half brick but not exc. one brick thick walls, complete all as specified and as directed.

Material & Labour for treating small article such as stops, covers, gully, gratings and hold fast ends & post backs of chowkat etc tarred area n exc 0.10 Sqm each complete all as specified and as directed.

Supply & Fixing 30 mm thick 2nd class hard wood plain framed shutter (any number of panels) with panel of timber flat on both sides (Feather edges) or of veneered particle board medium density wood particle board with commercial face veneers supply and fixed to chowkat complete all as specified and as directed.

Supply & Fixing 35 mm thick 2nd class hard wood glazed and skeleton shutter open and rebated and prepared to receive glass gauze etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.2 (a) complete all as specified and as directed.

Material & Labour applying two coats Synthetic Enamel Paint over a coat of pink primer on previously untreated wooden surface any description over 10 cm in width or girth not otherwise described including preparation of surface etc., complete all as specified and as directed.

Supply & Fixing PVC door frame size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheets, reinforced with MS square tube supplying & fixing in opening as per specification complete all as specified and as directed.

Supply & Fixing Factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed.

Supply & Fixing 100 mm long aluminium anodised barrel tower bolt ISI marked complete all as specified and as directed.

Supply & Fixing 150 mm long aluminium anodised barrel tower bolt ISI marked complete all as specified and as directed.

Supply & Fixing 200 mm long aluminium anodised barrel tower bolt ISI marked complete all as specified and as directed.

Supply & Fixing 100 mm long aluminium handle fabricatedd type anodised ISI marked complete all as specified and as directed.

Supply & Fixing 150 mm long aluminium handle fabricatedd type anodised ISI marked complete all as specified and as directed.

Supply & Fixing 100 mm long, butt hinges, extruded aluminum alloy with galvanised mild steel ,hinge pin, type B-21, ISI marked complete all as specified and as directed.

Supply & Fixing 250 mm long Aluminium sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet,caste or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed. complete all as specified and as directed.

Supply & Fixing 300 mm long Aluminium sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet,caste or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed. complete all as specified and as directed.

Supply & Fixing mild steel, 300 mm,ordinary rat tail rod pattern springs including roller and roller platecomplete all as specified and directed

Supply & Fixing II class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like incl all necessary labours articles not exceeding 200 Cu cm each complete all as specified and directed.

Supply & Fixing Galvanized mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fitted with tinned tacles or galvanised wire staples complete all as specified and as directed.

Supply & Fixed in repairs galvanised mild steel wirecloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply & Fixing in repairs vitreous china urinal half stall type white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing only flushing cistern with brackets including waste pipe etc.

Supply & Fixing in repairs Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted /erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and as directed.

Supply & Fixing in repair Vitreous China squating Pan Orissa pattern of size 580 x 440 mm white with integral foot rest excluding flushing cistern in repair complete all as speified and as directed.

Supply & Fixing in repair vitreous china washdown water closet pan (pedestal pattern) white incl seat and cover complete all specified and as directed.

Supply & Fixing in repairs PVC low level flushing cistern, white, 10 ltrs capacity with float valve and brackets complete including fixing low level flush pipe after dismantling of old unserviceable existing flushing cistern complete all as specified and directed.

Supply & Fixing of CI floor trap with gratings including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) for 100 mm bore complete all as specified and directed.

Supply & Fixed 20 mm thick 2nd class hard wood boarding fixed with nails in any situation and planed both side as in eave board complete all as specified and as directed.

Supply & Fixing in repairs PVC connection 15 MM size with PTMT nuts of length 450MM complete all as specified and as directed.

Supply & Fixing in repairs PVC connection 15 MM size with PTMT nuts of length 600MM complete all as specified and as directed.

Supply & Fixing swivel shower of PTMT any colour for fixing with 15mm pipe(Minimum weight 40 gms)

Supply & Fixing 15mm Bore bib tap standard of PTMT any colour screwed for iron pipe and fixed (minimum weight 15mm-90gms) in repair complete all as specified and as directed.

Supply & Fixing in repair 15mm bore dia pillar taps, fancy type chromium plated with capstan heads chromium plated screwed down high pressure, with or without lettered 'hotor cold' with long screwed shank and fly nuts screw for iron pipe .

Supply & Fixing 15mm Bore PTMT stop cock any colour screwed for iron pipe and fixed (minimum weight 15mm-90gms) in repair complete all as specified and as directed.

Supply & Fixing 15mm Bore PTMT angle stop valve any colour screwed for iron pipe and fixed (minimum weight 15mm-90gms) in repair complete all as specified and as directed.

Supply & Fixing in repairs brass chromium plated tubular towel rail , 20mm dia , 60cm long between flanges complete all as specified and as directed.

Taking up or down steel tubing and conncection 20 mm, incl cleaning for re-fixing or removal to store

Taking up or down steel tubing and conncection 15mm, incl cleaning for re-fixing or removal to store complete all as specified and as directed.

Supply & Fixing Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Supply & Fixing Tubes medium grade,15mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed.

Disconnecting existing tank, setting aside (or lowering if required) for repairs, etc and hoisting if required reconnecting and refixing in position of capacity in litres exc 250 n.exc 500 complete all as specified and as directed.

Dismantling water tanks and removing to store, exc 250 ltrs but n exc 500 ltrs,complete all as specified and as directed.

Supply & Fixing Rotational moulded polyethene water storage tanks 500 lit capacity with lid (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I , complete all as directed by Engr-in- Charge

Supply & Fixing 20mm dia ball brass valve high pressure with polythene float and fly nut complete scrwed for iron pipe or brass ferrule and fixed in repairs complete all as specified and as directed.

Supply & Fixing 20mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed in repairs complete all as specified and as directed.

Supply & Fixing 32 mm low density polyethylene pipes (LDPE) of pressure rating 6 kgf/sqcm fixed tio walls ceilling or in floor etc.complete all as specified and directed.

Refixing by easing and adjusting incl taking down and fixed in same opening of shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and as directed.

Material & Labour Chequered cemente concret tiles of size 20 x 20 x 25 mm thickness set jointed in neat cement slurry and pointed with grey cement and no pigment all as specified and as directed by Engr-in-Charge

Material & Labour for PCC 1:2:4 type B0 using 12.50mm graded stone aggregate 25 mm average thickness finished even and smooth w/o using extra cement

Material & Labour for 15mm thick rendering in CM 1:3 on concrete/brick surface finished even and smooth without using extra cement mixed with WPC ( WPC shall be measured and paid separately )

Material & Labour for PCC (1:2:4) type B1 50 mm thick using (20 mm graded stone aggregate) as in sunken complete all as directed .

Material & Labour for Bitumen blown any grade , applied hot, two coats to concrete surfaces at the rate of 1.5Kg sqm per coat. Including polythene film, black , 50 micron laid in floors.

Material & Labour for lean concrete (1:7:12) Type F2 laid compacted all as directed and specified

Taking down of existing roof treatment from roof and terrance, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following specification:- (a) Applying cement slurry over concrete surfaces @3kg/sqm. (b)Rendring 15mm thick in cement mortar (1:4) mixed with water proffing compound as per manufactures instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course). (c) Applying evenly one coat of cold bituminous primer conforming to [email protected] liter per square metre on the cleaned plastered surfaces (d) Applying evernly one coat of blown hot bitumen of grade 85/25@ 1.20 Kg per square metre on primed surfaces. (e) Applying a layer of APP based polymeric membrane, 3mm thick (minimum) weighing 3.50 Kg per square metre reinforces) with polyster non woven fabric wighing not less than 160 gms per square metre by torch application. The overlap shall be not less than 100mm on transverese direction and 75mm on longitudinal direction and sealing overlaps. (f) Applying evenly one coat of aluminium paint @ 0.10 litre per square metre over the APP based polymeric membrane.

M/s Nishi Kumar Das

M/S SUBHASH BHATTACHARJEE

Kshir Furnishers and Builders

M/s Jaiswal and Co

Lyngdohs Construction Company And Associates

M/S UB ENTERPRISE

M/S Nakul Chandra Samal

M/s M.D. Syiem