SITC of BOD Incubator 250 to 280 Ltr

PUNJAB BIOTECHNOLOGY INCUBATOR

COMMERCIAL BID FORMAT

Name of the Equipment BOD Incubator 250-280 Ltr

Name of the Manufacturer

Make of the Equipment

Part A - Main Equipment Qty Rate in Rs. GST Amount Total Amount

Double walled modular structure with PUF insulation - Outer wall: Texturized steel

- Inner wall: Stainless steel SS-304 with ribs for adjusting removable perforated shelves. The nuts, screws and hinges of the inner chamber shall be of Stainless Steel 304

- Perforated Stainless Steel 304 Partition tray (4-6 nos. according to capacity)

Doors Double door type

- Inner Door: Full view inner acrylic/tempered glass door with aluminum channel boundary, closes on a resilient gasket and permits view of the specimens (inside the Incubator), without disturbing the thermal conditions inside the chamber.

- Outer Door: Texturized steel finish/ Stainless steel

Capacity 250-280 Ltr.

Temperature Range +5 to 60˚C with digital controller

Temperature increments 0.1° C

Control Accuracy ± 0.1 °C or better

Distribution Accuracy/uniformity ± 0.3 °C or better

Temperature display - Multifunctional digital PID - Microprocessor controller

- Adjustable parameter display: Temperature (ºC & ºF), Programmed time

- Should have Pt100 sensor

Air circulation/ventilation Forced circulation through Peltier based heating & cooling system

Timer - 0 to 24 hrs X 7 days

- Timer Should not start until set temperature is reached at set point

Safety Alarms/ Feature - Self -diagnosis function including overheat /underheat

- Prevention and over current Protection

Voltage stabilizer Suitable voltage stabilizer to be provided

Certification - System must be CE MARK/ FDA and DIN standard certified

Supplier/ Manufacturer Must be ISO certified for quality

IQ/OQ On site IQ, OQ of instrument along with document to be provided

Service contract clauses, including prices List of all spares and accessories (including minor) with part numbers and price, required for maintenance and repairs in future after guarantee/warranty period should be attached

Operating manuals, service manuals, other manuals Should provide hardcopy and soft-copy of

- User, technical and maintenance manuals

- Service and operation manuals

- Certificate of calibration and inspection

Warranty - Warranty for 1 year after satisfactory installation and working.

Total Amount of Part A

PART B - AMC Charges (After expiry of Standard Warranty of One (01) Year

1st Year AMC Charges

2nd Year AMC Charges

3rd Year AMC Charges

4th Year AMC Charges

5th Year AMC Charges

6th Year AMC Charges

Total Amount of Part B

Total FOR Amount upto PBTI Site- Part A + Part B

Total Amount in Words:

1. It is mandatory to quote item wise rates for Part B lump sum rates are not acceptable for these.

2. Bidder must quote amount in the given cells, if amount against any cell is included in main component, bidder should put "Zero" value.

3. Taxes must be mentioned, if it is not mentioned, the same shall be treated as included in given rates.

4. This is to certify that the rates quoted above are not more than the rates charged from any Institution/Department/Organization

Signatory Name: