REPAIR TO SUNKEN FLOOR, ROOF TREATMENT,JOINERY, PLUMBING AND ALLIED WORKS AT MH, STAGING CAMP MD ACCN UNDER AGE BR-II AT NEW CANTT PRAYAGRAJ

Amount

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F steel water tubes, medium grade, ISI marked, galvanised, 25 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Refixing old 15mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refixing old 20mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refixing old 25 mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F in repair vitreous china counter top wash basin, white, oval shape of size 560 X 450mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed. Make: Hindware Cat Part No. 10049 or equivalent in Cera/ Jaquar

S&F in repair stainless steel sink with drainage board, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 610 mm x 510 mm with bowl size 560 mm x 460 mm x 240 mm , fixed in repairs complete all as specified and directed.

S&F Brass CP central hole mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore for WHB complete all as specified and directed. Make: Jaguar Cat Part No. CON-319KNB or equivalent in Cera/ Hindware

S&F in repair Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed. Make: Jaguar Cat Part No. CON-349KNM or equivalent in Cera/ Hindware

S&F in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repair CP Stop valve/angle valve 15 mm bore, fancy type cromimum plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions (weight of each should not be less than 0.40kg) complete all as specified and directed. Make: Jaquar/Cera/Hindware

S&F in repair Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank (white colour three layer) of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank (white colour three layer) of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia, 60 cm long for WHB/urinal with cup, complete all as specified and directed.

S&F in repair PVC waste pipe 40mm dia, 60 cm long for Sink with cup, complete all as specified and directed.

S&F in repair PVC connection reinforced 15 mm size with P.T.M.T nuts of length 450mm complete all as specified and directed.

S&F in repairs wall mixerss with provn for over head showers with 115 mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed Make: Jaguar Cat Part No. CON- 273KNUPR or Equivalent in Cera/Hindware

S&F Ball Valves 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs Ball Valves 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repair PVC valve, symphonic action type, flushing cistern 10 liters capacity low level white with inlet ,ball valve ,float and handle including brocket complete all as specified and directed by Engineer in charge.

S&F in repair for grating doom 100 mm dia of stainless steel.(Minimum weight 25gms) complete all as specified and directed.

S&F in repair bib taps with wall flange 15mm bore, fancy type, quarter/half turn, brass chromium plated, long body with capstan head (weight of each bib tap should not less than 0.575kg) and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.

S&F in repair of 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minium weight 90gms,complete all as specified and directed.

Demolition and breaking up drain waste pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar complete all as specified and directed.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends with access door any radius, 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends with access door any radius, 110 mm bore complete all as specified and directed.

M&L for running welding in repair thickness of metal to be welded Exc 6 mm but n exc 9mm complete all as specified and directed.

Supply and applying for component elastomeric acrylic polymer modified cementitious water proofing coating smart care damp block 2K Suprema of Asian make in 2 coats over the prepared surfaces (wall/ sunken floors) at a coverage of 1.5 Kg/Sqm. The coating shall have 80% elongation as ASTM D412 resisting 5 Bars hydro static pressure as per D1N 1048 reduction to rapid chlorides shall be 70 as per D1N 1048, crack bridging upto 1.2m as per ASTM 45485. The coating have food grade certificate from laboratories like CFTRI. The max ratio of coating shall be 2 Part of powder & 1 part of liquid within any water addition in the mixing etc complete as per manufacturer specifications. (ii) After the surface dried, plaster the surface with CM 1:4 15mm thick. Note: All water proofing treatment will be executed by the authoised representative of Asian Paints.

S&F in repair vitreous china urinal, half stall type (flat back), of size 635x395x420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.

S&F, in repair vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete after treatment of sunken slab, connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom & cover and aluminium anodised hinging device and fixed WC pan complete all as specified and directed.

S&F in repair single piece WC with PP soft close seat cover, Hinges, fixing Accessories, Accessories set and cistern fittings , size 360x640x680 mm white,S trap/P trap 220mm, etc. complete including making good to floor complete all as specified and directed. Make: Jaquar /Cera/ Hindware

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering on other than fair faces of brick wall in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick wall or concrete in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 5mm thick rendering on fair faces of brick or concrete ceiling surface in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

M&L applying 3mm thick white cement based water proof wall care putty external for preparing new plastered decorated surfaces of wall and applying two coat of exterior emulsion paint (Apex/Weather coat) white or tinted as approved complete all as specified and directed.

M&L for preparation of new plastered surfaces, applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 2 to 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of oil emulsion distemper over a coat chalk whiting of approved shade on old surface of wall complete all as specified and directed.

M&L for complete removal of existing treatment and , applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 2 to 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of oil emulsion distemper over a coat chalk whiting of approved shade on old surface of wall complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying two coat of oil bound distemper Including cleaning of entire surface complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of plastic emulsion paint Including cleaning of entire surface complete all as specified and directed.

M&L for preparing of newly plastered ceiling surface and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of ceiling complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of wall complete all as specified and directed.

M&L for preparing old plastered decorated surfaces of wall and applying one coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish with 6 years of performance warranty by manufacturer applied (Make: Asian Ultima/Equivalnet)

M&L for complete removal of existing finishes of wall including cornices etc and applying two coat of exterior weather proof (Make: Asian Ultima or Equivalent)100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish with 6 years of performance warranty by manufacturer over 2-3mm thick waterproof wallcare putty complete all as specified and directed.

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified & directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed.

Taking down shutters of wooden or aluminium door of any description n. exc 1 sqm each complete all as specified & directed.

Taking down shutters of wooden or aluminium door any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed.

Refixing wooden or aluminium door shutters of any description not exceeding 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware, glass etc as required and renewal of unserviceable screws complete Note : Glass,boards , aluminium snap bead, rubber beading for aluminium door and window shutter if required new to be measured and paid separately.

Refixing wooden or aluminium door shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware, glass etc as required and renewal of unserviceable screws complete all as specified and directed. Note : Glass,boards , aluminium snap bead, rubber beading for aluminium door and window shutter if required new to be measured and paid separately.

M&L for plain fillets (2nd class hardwood) fix in repair square, rectangular or triangular in section, clean sawn, secured with nails or brads Exceeding 3sqcm and not exc 6sqcm fixed with nails on wooden or any other section including painting etc complete all as specified and directed.

Supply only new rubber beading of suitable size for fixing the glass/board in aluminium door/ window shutter complete all as specified and directed.

Supply only aluminium snap bead of suitable size for aluminium door and window shutter complete all as specified and directed.

Supply only “RAJSHRI” Brand Factory Made 9mm thick 100% Solid WPC ( Wood polymer Composite ) Sheet of required size (lamninated both side) comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. complete all as specified and directed. Material test certificate and authentication should be compulsory provided by the manufacturing company

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65mmX125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 30mm thick "RAJSHRI" BRAND FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.

S&F 12mm thick Milky white frosted toughened glass with etching for making good any surface/wall door etc including necessary fittings, channel rails etc quality as approved, fixed with jointing material PVC flap at bottom to make fly proof including of Brass CP 450mm long handles, suitable magnet to hold shutters etc is directed by Engineer-in-Charge.

S&F Powder coated aluminium frame for doors, windows, ventilators, partition, posts to sustain curtain rail etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coated aluminium door shutters, aluminium sectioin weighing 0.55 kg/m including necessary joinin cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges, anodised aluminium snap beading screws with provision of double action floor spring etc complete all as specified and directed.

S&F Powder coated aluminium window and ventilator shutters, side hung type, without sash,aluminium sectioin weighing 0.55 kg/m including necessary joinin cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long(1no), hinges type B 21 100mm long( 2no) suitable handle (1no) complete all as specified and directed.

S&F in repair powder coated anodised aluminium powder coated Grill of size 75 x 75x 4mm thick for windows , including joining cleat, anodized aluminum strip beading screw complete all as specified & directed.

Supply and fix fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board plain sheet complete all as specified & directed. Make : Rajshree or equivalent all as specified and approved by GEr. Note: Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only

Supply and fix fabricate in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board laminated sheet complete.Make : Rajshree or equivalent all as specified and approved by GE.

M&L for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast,Coping errection of posts etc complete all as specified & directed.

M&L mild steel work as in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, hooks (stay) heavy for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 2nd class hardwood factory made door, 35 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number , edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) complete all as specified & directed.

S&F for 2nd class hardwood glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (b) complete all as specified & directed.

Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, including expanded metal etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified & directed.

S&F ACECO 4000 Series double shutter (glazed and gauged) steel windows and ventilators with guard bars, fabricated from roll formed sections made of mild steel sections including 4 mm thick plain glass as in glazing for glazed shutters and stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm complete for gauged shutters, fitting and fixtures all as specified in CELZ TD Drawing complete all as specified & directed. Note : The actual opening size may vary from the TD Drg.

S&F solid prelam moulded PVC double door frame of size 50mm x 95mm made single side prelam PVC sheet used instead of plain colour PVC sheet complete all as specified & directed.

S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified & directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces , over 10 cm in width or grith not other wise described complete all as specified & directed.

S&F for galvanised S S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed.

S&F in repair for galvanised S S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed.

S&F continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.

S&F magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

M&L for 4mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

Hacking out old boken glass panes and S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified & directed.

S&F for 6.30mm thick sheet glass ordinary quality and glazing with rubber beading/gaskit in square exc 0.5 sqm in each pane complete all as specified & directed.

S&F in repair Stainless steel tubing of 25 mm dia for curtain rod fancy type with brackets including end cap (wall to wall or flush to wall) for securing to curtain rod complete all as specified & directed.

S&F in repair floor door stopper overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised,with hard drawn steel spring complete all as specified and directed.

S&F in repairs aluminium (Die cast) body Door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair Aluminium Lock,4 Lever,100mm long fixed to Aluminum doors complete all as specified and directed.

S&F in repair 100mm mortice lock four levers (vertical type), of brass body complete all as specified & directed.

S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed.

S&F 300mm long stainless steel sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple complete all as specified & directed.

S&F stainless steel ISI marked butt hinges cold rolled meium weight of size 100mm etc complete all as specified & directed.

S&F Aluminium anodised 150 mm pressed handles oval type stove enamelled black complete all as specified & directed.

S&F for Aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified & directed.

S&F in repair 300mm long SS sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple complete all as specified & directed.

S&F in repair 300mm long aluminium alloy anodised sliding door bolts , with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy complete all as specified & directed.

S&F in repair stainess steel ISI marked butt hinges cold rolled meium weight of size 125mm etc complete all as specified & directed.

S&F in repair Aluminium alloy handles 150 mm long fabricated type complete all as specified & directed.

S&F in repair aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified & directed.

M&L for Mild steel plain black sheet 1.25 mm thick in hearths; covering to door shutters; ducts, etc, cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets, fixed to wood or steel members with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, etc as required all as specified & directed.

S&F 150 mm long aluminium anodised tower bolt of extruded section complete all as specified and directed

S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified and directed

S&F 100mm long SS of premium quality handle complete all as specified and directed

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F 10mm thick plaster of paris ceiling (Gypsum false ceiling) to flat / curved surfaces including sunk or raised moulding with POP and finishing complete all as specified over GI frame work including all necessary drilling, cutting to fix electrical items complete all as spfd and directed with followings: (a) GI sheet channel made to shape 30X25X20 of 24 gauge fixed with rowel plug with screw 450mm centre to centre along with perimeter of walls. (b) GI sheet channel make to shape 50X40X40 mm of 24 gauge placed at 600mm centre to centre from perimeter of wall except long wall (in one span) (c) GI sheet intermediate runner of size 45X10X10 mm of 24 gauge fixed at 1200mm c/c leaving frame of one side wall (in other span) (d) GI sheet 25mm wide and 20mm gauge suspenders fixed with the screw steel fasteners to rrof ceiling @ 1200mm c/c including plugging in RCC slab (e) GI wire mess fixed to framework complete all as specified and directed

S&F POP cornices and moulding of any design and shape complete all as directed by Engineer-in-Charge

S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F hollow PVC wall lining consisting of 8 to 9mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

S&F in repair waste coupling of CP (half or full threaded) (minimum weight 32mm- 45gms/40mm-60gms of 32mm dia for WHB complete all as specified & directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.

S&F in repair corner glass self assembly complete all as specified and directed. Make: Jaguar Cat Part No. ACN-1173 or equivalent in Cera/Hindware

S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F in repair stainless steel soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed. Make: Jaguar Cat Part No.ACN-1131N or equivalent in Cera/Hindware

S&F in repair jet nozzle for EWC complete with all fittings complete all as specified and directed.

S&F in repair two way angle valves /tap with flange 15mm bore, fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed. Make: Jaguar Cat Part No.CON-041KN or equivalent in Cera/Hindware

S&F in repair toilet paper holder, superior quality, brass chromium plated, fancy type complete all as specified and directed. Make: Jaguar Cat Part No.ACN-1151N or equivalent in Cera/Hindware

S&F in repair Brass CP central hole mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore for WHB complete all as specified and directed. Make: Jaguar Cat Part No. CON-319KNB or equivalent in Cera/Hindware

S&F in repair Brass CP elbow operated pillar cock (Florentine single lever surgical pillar tap) complete all as specified and directed. Make: Jaguar Cat Part No. FLR-CHR-5031N or Equivalent in Cera/ Hindware

S&F in repair Stainless steel tie hanger 300/450mm long fixed to wardrobe shutter complete all as approved by Engr-in charge

S&F in repair health faucet with 1m long flexible CP pipe with wall hook complete with all fittings complete all as specified and directed. Make: Jaguar Cat Part No.ALD-565 or Equivalent in Cera/Hindware.

S&F in repair Brass chromium plated shower rose 150 mm size Square or round , shower Arm with swivel joints complete all as specified and directed.

S&F in repair Towel ring chromium plated complete all as specified and directed. Make: Jaguar Cat Part No. ACN-1121BN or Equivalent in Cera or Hindware

S&F in repair Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified. Make: Jaguar Cat Part No. ACN-1111SM or Equivalent in Cera or Hindware

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

M&L for joint free non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item complete all as specified and directed.

M&L for joint free non skid, ceramic “coloured” tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item complete all as specified and directed.

M&L for joint free non skid, Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L joint free vitrified ceramic coloured tiles of 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item complete all as specified and directed.

M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 300 mm x 450 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M&L for first or premium quality heavy duty digital pavement tiles 400mmX400mmX10mm thick coloured for floor/pavement etc & jointed in neat cement slurry and pointed with white cement fixed with colour pigment to match colour of tiles including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and polishing completeincluding rubbing and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto asper item no 23 and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 all as complete all as specified and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polilshed)for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Marble work Udaipur Green or any approved colour 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 10mm thick rendering in CM 1:4 complete all as specified and directed by Engr-in-charge.

Demolition of Stone slabs and tiles laid dry and dry or pointed of any description or thickness infloors, aprons etc.complete all as specified and directed.

M&L for PCC type E2 1:5:10 using 40mm graded aggregate as in sub base complete all as specified and directed

M&L for 80mm thick M-40 grade factory made vibratory compected cement concrete rubber moulded, coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed.

M&L for rubber moulded chequered cement concrete coloured tile 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor all as specified including dismantling of tiles complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) all as specified and directed.

M&L for brick work (Except Brick) with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as specified and directed.

Dismantling of AC sheet corrugated/semi corrugted sheets in wall cladding or in roof covering complete all as specified and directed.

M&L 6mm thick non-asbestos fibre cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed.

Fixing only 6mm thick Asbestos fibre cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed. Note: AC sheets retrieved from dismantling shall be used.

S&F 6mm thick non-asbestos fibre cement two piece serrated ridges for corrugated or semi-corrugated sheet fixed with 'L' hooks or 'J' hooks or cranked hook bolts complete all as specified and directed.

Fixing Only 6mm thick non-asbestos fibre cement two piece serrated ridges for corrugated or semi-corrugated sheet fixed with 'L' hooks or 'J' hooks or cranked hook bolts complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified.

M&L for structural steel work with rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) quality A complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern roof covering complete all as specified and directed.

M&L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

Removing of surplus excavated/demolised materilas to a distance exc 50m and n exc1.5 km away where complete all as specified and directed.directed by Engineer-in-charge. Note: Demolished material should not be thrown away on the ground from the top of roof, it should be removed from the roof by manually or by any mechanical means

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrived material upto a distance n.exc 100m where complete all as specified and directed.

Demolition of mud in roof, any thickness including plastering and leaping (where full thickness recoved or only a part there of disposal off rubbish upto a distance n.exc 100m, where directed complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed. (Note - Average thickness shall not exceed 40mm complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:3 complete all as specified and directed.

Supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray / brush applied, SmartCare PU Magnum membrane with an elongation of 550% and tensile strength of 2.5 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 7 bars of water pressure as per DIN 1048, shore A Hardness of min. 45 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare PU Magnum or approved equivalent in two coats with a consumption of 1.5 Kg per SQM on a primed surface with SmartCare Primer and a 40 GSM geo textile cloth sandwiched in between, etc., complete as per Manufacturer's specifications complete all as specified and directed.

S&F in repair aluminium composite panel sheet 3mm thick of brand name GURIND/ Alstone fixed with screws and necessary aluminium tube of size 25mmX38mmX1.5mm thick duly filled joints silicon as in ceiling, columns or making sign board with fixing steel letters complete all as specified and directed

R.K.ASSOCIATES

Prahalad Rai