SPL REPAIRS TO TOILET NEAR BLDG NO AET 7 8 BCD OF 536 ASC BN AND PROVN OF CHAIN LINK FENCING AT 536 ASC BN UNDER GE SAUGOR

Amount

Surface excavation not exc 15 cm deep in soft soil complete all as specified and directed.

M&L for jungle clearance in soft soil complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 Cum getting out and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified and directed

M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed .

M&L for plain cement concrete 1:3:6, type C1 (using 20mm graded stone aggregates) as in foundation filling and mass concrete or lean concrete complete all as specified and directed

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Supply only chain link mild steel galvanised fencing of any size and dia complete all as specified and directed. Make:TATA/SAIL/JINDAL

Fixing only mild steel galvanised chain link fencing of any size and dia complete all as specified and directed.

S&F mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of but exc 5cm but not exc 10cm and dia of shank 11 to 15mm complete all as specified and directed

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F Galvanised. 2 strand, steel barbed wire 2 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified and directed. Make:TATA/SAIL/JINDAL

S&F 10mm dia & over mild steel round or square bars fixed behind chain link fencing as guard bars etc and similar articles complete all as specified and directed

M&L for PCC 1:2:4, type B1 (using 20mm graded stone aggregates) as in coping, benching and other similar work (location) with weathering slightly rounded edges and throating etc as required with and including all necessary form work complete all as specified and directed

S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

M&L for preparation of new steel & iron surfaces of any description, not exc 10cm width or girth when unconnected with other painting or when painted in different tint and & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Demolition of cement concrete un reinforced in ground floors and paving not exc 15cm thickness below or above ground level complete all as specified and directed

M&L for 150 mm thick moorum/red bajri filling in plinth protection or in pavings, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

M&L for 75mm thick PCC 1:3:6, type C2 (using 40 mm graded stone aggregates) incl finished even and smooth with using extra cement as in plinth protection incl necessary form work to edges complete all as specified and directed

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding ,removal servicable tiles from site and rubbish off the premises complete all as specified and directed

M&L for raking out joints/ pointing in cement mortar to squared rubble masonry, coursed or uncoursed complete all as specified and directed .

M&L for rendering 15 mm thick on stone masonry surface or surface other than fair faces of brickwork in 1:6 and finished even and smooth with out using extra cement including taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for for two coat of plaster, 1st coat 10mm thick in CM 1:6 and 2nd Coat Plaster 5mm thick in CM 1:4 with water proofing compound @ 2% by weight of cement and finished surface even and smooth with out using extra cement complete all as specified and directed. (Note:-WPC compound shall bemeasured and paid seprately under respective item).

Supply only integral water proofing compound complete all as specified and directed

M&L for applying three coats of white wash on new wall surface including preparation of surface complete all as specified and directed..

Dismantling framed trusses (wooden) span not exc 10m complete all as specified and directed.complete.

Dismantling structural steel work including doors, gates,etc but excluding framed truss complete all as specified and directed.

Taking down chowkats or frames with shutters without taking of shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters without taking of shutters from the frame) exc 1.50 but not exc 4 Sqm each complete all as specified and directed.

S&F factory made Solid PVC prelam Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet single side prelam PVC sheet wood grain printed used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with mild steel square tube complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelam on the front face & 4mm prelam PVC sheet on back face, supplying & fixing in frame center core will be PVC Battern complete all as specified and directed.

S&F mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width (0.8 to 1.2 m and ht 1.9 to 2.10 M.).

S&F 200 Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. .

S&F 75mm butt hinges meadium weight cold rold, stainless steel and fixed complete all as specified and directed.

S&F 125 mm long aluminium handles cast type anodised complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges ,steel peg stay complete all as specified and directed.

M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregates) as in hold fasts, coping, filling of mild steel frame bed blocks complete all as specified and directed.

S&F 15mm dia GI tubing medium grade gavanised with all fittings and fixed coplete to walls and ceiling or laid in floors complete incl the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete and holes shall be made good with CM 1:3 properly including taking down steel tubing 15mm bore and connection complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting n exc 10cm girth. pinning in, making good to facings where required and pointing in CM 1:3 on stone walls complete all as specified and directed.

S&F 20mm dia GI tubing medium grade gavanised with all fittings and fixed coplete to walls and ceiling or laid in floors complete incl the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete and holes shall be made good with CM 1:3 properly including taking down steel tubing 20mm bore and connection complete all as specified and directed.

S&F 25mm dia GI tubing medium grade gavanised with all fittings and fixed coplete to walls and ceiling or laid in floors complete incl the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete and holes shall be made good with CM 1:3 properly including taking down steel tubing 25mm bore and connection complete all as specified and directed.

M&L for brick work work with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 including demolition of brick work or stone/boulder masonry, built in cement mortar mortor incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

S&F mild Steel work as in purlins/rafters/posts with round/rectangula/square hollow section complete all as specified and directed

S&F mild Steel work as in truss with round/rectangula/square hollow section complete all as specified and directed

S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 11 to 15 mm complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome primer complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling of asbestos cement (corrugated ,semicorrugated etc) sheets including ridge in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling of asbestos cement (corrugated ,semicorrugated etc) sheets including ridge in roof covering complete all as specified and directed.

S&F flat iron work as in wind ties for roof incl securing bolts conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8mm mm thick (Square/ rectrangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm as in floors laid over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L for glazed ceramic tiles of size 450mmx300mmx7mm to 8mm thick, coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work laid over and including 15mm thick rendering in CM 1:6 and corner tiles shall be rounded / chamferred complete all as specified & directed.

S&F in repair 15mm bore CP brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs angular stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed

S&F in repairs concealed stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed

S&F in repair vitreous China WHB white flat back size 550x400mm including S&F angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repairs vitreous China full size pedestal for wash hand basin complete all as specified and directed

S&F in repair vitreous China squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests incl flush pipe, provn of lime concrete bedding complete all as specified and directed

S&F in repair PVC valveless, syphonic action type, flushing cistern (dual 5/10ltr capacity), low level, white, with intel, ball valve, float , handle and flush pipe 32mm bore,and brackets complete all as specified and directed

S&F in repair PVC connection on pipe 450mm long with brass nut bolt complete all as specified and directed

S&F in repairs vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe including waste pipe complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 600mm long between flanges, 20mm dia, D type complete all as specified and directed

S&F in replacement rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity

S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs 20mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed

S&F in repair PVC (SWR) Pipe single socketed in any length with adhesive joints laid in trenches or in floor for 110mm dia complete all as specified and directed

S&F in repair PVC (SWR) Pipe single socketed in any length with adhesive joints 110mm dia fixed to walls with mild steel clamps complete all as specified and directed

M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintel hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165 complete all as specified and directed

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed

S&F PVC Bends any radius 110mm dia provided with access door complete all as specified and directed

S&F PVC vent cowl 110mm dia complete all as specified and directed

S&F 75 mm dia PVC (SWR) Nahani traps, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2;4) complete all as specified and directed.

S&F 75mm dia CP shower rose swivel type with & incl 460mm long brass CP heavy duty, fixed in repairs complete all as specified and directed

M&L for reinforcement cement concrete (1:1.5:3) type A1 Nominal mix as in beams, cantilevers, bressumers lintels over 1.5m span complete all as specified and directed

M&L for mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete.

M&L for Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed

M&L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. rough finished surfaces of concrete flat complete all as specified and directed

S&F 3mm thick figured glass, pin head type and fixed with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed

Taking down copper/aluminum point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting ,wooden boards, bell push, call bell,MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed

M&L for concealed point wiring one light, fan point controlled by one switch with 1.5 Sqmm PVC(FR) insulated, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc/square PVC Top blocks at junction for batten holders, ceiling rose etc screws, gutti/roul plugs PVC all as per site requirement including MS sunken boxes made out of ms sheet and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green(Make–for cable - Havells/Polycab/Finolex.

All as per Srl item No.81 above but for one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No 81 here in before but for power point wiring using with 2.5 sqmm PVC (FR)insulated , unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.

S&F switch piano type flush, single pole, one way, 5 Amp 230 Volt complete all as specified and directed

S&F socket outlet , 5 pin, 5 Amp flush, 230 Volt . Make Havells Reo series/ Cona/Leader.

S&F switch piano type flush, single pole, one way,15 Amp 230 Volt complete all as specified and directed

S&F socket outlet 2 in 1, 6 pin, 5/15 Amp , flush type universal shuttered 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit, 63.5x48 mm three terminal complete all as specified and directed

S&F lamp holder pvc insulated with back plate suitable for Angle/Batten fitting with 9 Watt LED bulb complete all as specified and directed

S&F testing and commissioning of MCB SP 6-32 Amp 240 Volt, 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.90 above but SPN 32- 63 Amps, 240 V

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar incl TW board of suitable size complete all as specified and directed

S&F in replacement TL fitting 20 /18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. Make Havells Cat Part No LHEXBLP7PN1W020, 4 feet or eqvt in Bajaj cat part No BCLSB 20 WH/ CG Cat par No LCTC-18-CDL

S&F in replacement LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make - Havells cat part no LHEXCGP7UN5W013 or eqvt in BAJAJ cat part no BIBWP10WLED /CG cat part no LBHE-10-CDL.

Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 sqmm 2 core complete all as specified and directed

Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 mtr depth for laying of cable as the case may be and getting out in hard/dense soil complete all as specified and directed.

M&L for sand cushioning in trenches for the cable complete all as specified and directed

Returning filling, spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed

Removing excavated surplus material n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr from starting point complete all as specified and directed

M&L for kiln burnt bricks sub class B laid in trenches for cable protection complete all as specified and directed

S&F GI Pipe light grade 40mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep mettalic body . complete all as specified and directed. Make - Havells TURBOJET/Bajaj MAXX AIR/Crompton EXHD300-6-1.

S&F electric water heater (Geyser) ISI marked 25 Ltrs capacity AC 230V, 5 star rating Branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. Make - Racold/Usha/Havells

M&L for provn of earthing complete with MS galvanized earth plate electrode 600x600x6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5 M below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR part-I 12009 specification.

M/s Mohan Singh