Loading
Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹1.9 L
Closing Date
25 Jun 2026, 9:30 pm
Directorate of Municipal Administration
Electrical Works at various areas of south zone/division
304665
DMA/2026-27/EL/WORK_INDENT56969/CALL-2
Open
Electrical
DMA City Corporation Belagavi
1 document required · 1 mandatory
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To qualify for award of this contract, each tenderer in its name should have in the last five years 2021-22 to 2025-26 (b) Satisfactory completed, at least one similar work of value not less than Rs.48.52 lakhs. as prime contractor with indent number. (Work done certificate should be issued by Executive Engineer or equivalent)
To qualify for award of this contract, each tenderer in its name should have in the last five years 2021-22 to 2025-26 3) Executed in one year (for a continues period of 12 months) the following minimum quantities of work. (Work done certificate should be issued by Executive Engineer or equivalent 1 Supply and fixing of Street light poles 152 Nos. 2 Providing and laying of LTUG Cable 2.78 Km. 3 Supply and fixing of overhead conductors 9.12 Km. (Work Done Certificate from Executive Engineer or Equivalent)
To qualify for award of this contract, each tenderer in its name should have in the last five years 2021-22 to 2025-26 achieved in at least two financial years an average annual financial turnover of Rs.97.05 lakhs (Turnover certificate from CA with valid UDIN Number along with profit loss, Balance Sheet and IT Returns).
3.3.b liquid assets and /or availability of credit facilities of no less than Rs.29.11 Lakhs (Unconditional Credit lines/ letters of credit/ certificates from banks for meeting the fund requirement etc).
Pan Card and GST Registration
Formats of sections as per tender documents
Registration Certificate of electrical contractor in KPWD/CPWD/ Government Chief Inspector of Electrical/KPTCL/BESCOM/Any Government Agency
₹2,540
₹1.9 L
9 Jun 2026
9 Jun 2026
29 Jun 2026
18 Jun 2026
19 Jun 2026
Electrical Works at various areas of south zone/division under the limits of city corporation belagavi
1.1kV LTUG Heat Resistant PVC Insulated Cables as per IS-1554 Part-1 1998
with following parameters as per BESCOM Requirements:
H2 or H4 grade Aluminium Conductor having purity of 99.7 ,Conductor Resi...
1.1kV LTUG Heat Resistant PVC Insulated Cables as per IS-1554 Part-1 1998
with following parameters as per BESCOM Requirements:
H2 or H4 grade Aluminium Conductor having purity of 99.7 ,Conductor Resi...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm
Earth work excavation by manual means for drains, canals, waste weir, draft,
approach channels, key trenches, foundation of Buildings & bridges and such
simillar works in all kinds of soils, as per dr...
Dismantling of Flexible Pavements,Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials
separately,II By Mechanical Means,A Bitumi...
Dismantling of Cement Concrete Pavement,Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at design...
Supplying and laying of HDPE/PLB Pipe 40/33 mm in the already excavated surface
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Mate...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with supe...
Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm Long Barrel
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Fabricating,supplyinganderectionof...mslonghotdipGalvanizedOctagonalhotdipPolewithBSEN10025gradeS355JOsteelplateforshaft,IS2062forbaseplatewithdooropeningarrangements,includingsuitableboards,Bakelites...
Fabricating,supplyinganderectionof...mslonghotdipGalvanizedOctagonalhotdipPolewithBSEN10025gradeS355JOsteelplateforshaft,IS2062forbaseplatewithdooropeningarrangements,includingsuitableboards,Bakelites...
Supplying,andfixingofHotdipGalvanizedM.S.BracketsuitableforoutdoorluminariesandmountedonOctagonalpoleusingnecessarybolts, nuts etc., complete. Double Arm Bracket with 1000 mm Standard 40/50 mm dia
Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection...
Supplyanderectionof14FeetHeightStreetLightPole14FeetHeightStreetLightPoleonsuitablecementconcretefoundationwith2.5Feetheightdia95mmcastirondecorativeroundpedestalasperdesignweighingnotlessthan37Kgs,th...
Fabricating ,supplying and erection of 7 mtrs long hot dip galvanised decorative street light pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arran...
Fabrication,Supplying,Erection,TestingandCommissioningof......mslongPolygonhighmastwithSingle/Multipletelescopicsectionshaving,(minimumoverlapdistanceof1.5timesoftopsection)thicknessasperBSEN10025grad...
FabricatingsupplyingandmountingMSboxmadeout....SWGsuitableforfloor/wallmounting,fullyweatherproofwithprovisionforbetterheatdissipation,providedwithhingedfrontcover,equippedwithtamperprooflockingarrang...
Supplying.........Arated3phasewithneutralbusbarusingrequiredcapacityelectrolyticaluminiumstripscoveredwithheatshrinkablecolouredPVCsleeve,mountedonphenolic/FRP/DMCinsulatorwhicharemountedonpowdercoate...
SupplyingandfixingangleironframeworkfabricatedoutofM.S.angleiron..andM.S.Flat......withbolts,washersetc.,andpaintedwith 2 coats of red oxide and then two coats of approved paint 40 x 40 x 6 mm
Supplying4mmthickplasticsheetwithnecessarynitchesforfixingswitches,regulatorsetc,andfixingonexistingwoodenormetal box using N.F. screws.
Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross 3withShortcircuitbreakingcapacityof10Kandcompletewiringa...
SupplyingofmultifunctiondigitalmeterwiththreelinebacklightLCDtypedisplayforvoltage,Current,frequency,Power,powerfactor,kVA,kWH,kVARsuitablefor3phase,4wireLTnetworkwithIP54degreeofprotectionandcomplete...
SupplyingandfixingofLEDtypepanelboardindicatinglampwith required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 4mm2
SupplyingheavygaugePVCconduitpipe.......dia.......mmthickconfirmingtoIS2509withsuitablesizebends,junctionboxes,adhesivepasteetc,andfixingusinginvertedwoodplugsincaseofRCCceilingandRCCwall/stonestructu...
SupplyinganddrawingFlexibleMulticoreCablemanufacturedwithelectrolyticgradeflexiblecopperwithlowconductorconfirmingtoIS8130-1984and(Virgin)PVCinsulationsheathedsuitableforworking voltage upto 1100 Volt...
Supplying and fixing LT AC Single Phase 2 wire 5-30 a smart energy meter, class1.0 accuracy with communication module without box with all charges as per direction of Engineer-in-Charge
Supplying,fixing,wiring,earthelectrodeforgroundingconduits,I.C.cutoutsandotherequipment'sonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapit.Thepitshouldbefilledwithequalproportionofsalta...
RCC Pole - 9 Mtr Long, 150 Kg WL Sq Section (Dwg No. BESCOM/GM/QS&S/51 Dtd 24.11.2018) as per IS-785
PSCC Pole - 9 Mtr Long, 300 Kg WL(Dwg No. BESCOM/GM/QS&S/55 Dtd 24.11.2018) as per REC Standards
LT 4 Pin Cross Arm - MS(Dwg No. BESCOM/GM/QS&S/32 Dtd 24.11.2018) (Cross Arms (MS & GI) as per IS-1977)
LT ST Support 50x6 mm Flat - MS(Dwg No. BESCOM/GM/QS&S/32 Dtd 24.11.2018)
EG Stirrup (MS) with GI wire lacing
Spiral Earth Electrode
RCC Pole Clamp - MS(Dwg No. BESCOM/GM/QS&S/30 Dtd 24.11.2018) ((Clamps A Type (MS & GI) as per IS-1977))
PSCC Pole (300 Kg WL) Clamp - MS(Dwg No. BESCOM/GM/QS&S/59 Dtd 24.11.2018) ((Clamps A Type (MS & GI) as per IS-1977))
Guy Clamp - MS(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) (Clamps A Type (MS & GI) as per IS-1977)
1.1 kV Ceramic Pin Insulator (Shell only) (Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric)
1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator (Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric)
No. 8 Strain Insulator (Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric)
DISC Insulator 45 kN Porcelain (Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric)
Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM (ACSR Conductor as per IS-398 (Part - 2/1996))
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. Hard Soil
Digging of Pit for GUY SET,Hard Soil
Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth
Fixing of 4 Pin cross arm with Insulator and Braces fixing
Fixing of HT/LT Single Top Support
Fixing of Earth Guard Stirrup
Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)
Stringing of conductor Rabbit ACSR binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.
Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ...
Supplying and fixing of PVC casing and capping on the wall orceiling using necessary materials like bends, junction box,elbows, screws at an interval of 300 mm .... etc. as required. 20 mm
Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm usin...
Supplying And Fixing "S" Hook made out of 14 mm dia
Supplying And Fixing M.S. Rafter Clamp Set made out of
M.S. Flat & 14 mm M.S. rod.
Supplying And Fixing Metal Fan Box with Round Hook
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (...
Supplying and fixing surface/flush mounting unbreakable PVCmodular box suitable for mounting modular switch plates withdue groove cutting in Brick/C.C wall, including necessary rawlplugs, Machine/NF s...
Supplying and fixing surface/flush mounting unbreakable PVCmodular box suitable for mounting modular switch plates withdue groove cutting in Brick/C.C wall, including necessary rawlplugs, Machine/NF s...
Supplying and fixing surface/flush mounting unbreakable PVCmodular box suitable for mounting modular switch plates withdue groove cutting in Brick/C.C wall, including necessary rawlplugs, Machine/NF s...
Supplying and fixing surface/flush mounting unbreakable PVCmodular box suitable for mounting modular switch plates withdue groove cutting in Brick/C.C wall, including necessary rawlplugs, Machine/NF s...
Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing meta...
Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing meta...
Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing meta...
Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing meta...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch
Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc, for operation on 230 V, 50 cycles.Single phase AC supply conforming to ISS-374- 1979 and withdouble ball beari...
Supplying haevy duty wall mounting fan suitable to operate at singlephase
230v AC. supply.
Supplying exhaust fan of 1440 RPM of 15" Sweep (450 mm) size with
bracket blades complete for light duty suitable to operate on
230V 50Hz, AC Supply.
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Fixing a ceiling /wall mounting fan of all capacities and all
types, with necessary clA and 'S' hook made out of 15mm diaMS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/...
Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70 lumen maintenance with CRI 80. Power Input: 220-240V at 50/60Hz and Power f...
Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70 percent lumen maintenance with CRI grater than 80. Power Input: 220-240V at ...
Supplying & fixing retrofit type-PL- LED Lamp W LED linear source with CCT 6500 degree K, CRI greater than 70 percent. efficacy greater than 80 lumen per W, life grater than 25000 burning hours and
Supplying & fixing retrofit type-PL- LED Lamp W LED linear source with CCT 6500 degree K, CRI greater than 70 percent. efficacy greater than80 lumen per W, lifegreater than 25000 burning hours and
Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI gr...
amp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance ...
Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wi...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.
Supplying and fixing of Modular MCB Devices (Tripper)
With Breaking capacity of 6kA. 40 A TP
Supplying and fixing of Modular MCB Devices (Tripper)
With Breaking capacity of 6kA.. 16 - 32 A SP
Supplying and fixing of Modular MCB Devices (Tripper)
With Breaking capacity of 6kA.. 40 A SP
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid document kw-3 56969 CALL-2.doc
Tender Document • 0.63 MB
Download all tender documents and submit your bid