Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹8,800
Closing Date
28 Dec 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Managing Director
No.12 Thambusamy street,Kilpauk,Chennai
Carryout the Renovation works to the existing Mill store room in TNCSC MRM campus at Chidambaram in Cuddalore District.
2023_TCSC_400260_1
97/CED6/034094 /2023
Open Tender
Civil Works
Lump-sum
90 days
Chidambaram
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹8,800
1 Mar 2024
15 Dec 2023
29 Dec 2023
15 Dec 2023
28 Dec 2023
15 Dec 2023
Amount
CIVIL WORK
Dismantling brick work in cement mortar walls under 3mt height and clearing away and carefully stacking materials useful for re-use for any thickness of wall as directed by departmental officers.
Dismantling Reinforced cement concrete and clearing away and carefully stacking materials useful for re-use as directed by departmental officers.
Dismantling cuddapah slab and clearing away and carefully stacking materials useful for re-use as directed by departmental officers.
BRICK WORK in cement mortor 1:5 (one cement, five sand) using best quality second class chamber burnt bricks of size 9"x4 3/8"x2 3/4"for walls including cost of scaffolding curing, finishing etc.,complete complying with standard specifications and as directed. In ground floor Upto 4.50M height above basement.
Above 4.50m height from basement
PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.
Supplying fabricating and fixing in position of Aluminium Anodised natural colour matt finish sliding window in two track in all floors with following sizes. All the three shutters with sliding arrangements the bottom section should have gutter arrangements so as to drain the water entering and made with extruded aluminium section for outer frames as shown below with necessary accessories such as rubber beeding. Necessary dismantling making necessary holes in RCC columns, Beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers. The Aluminium surfaces should be anodised with matt finish under electrically condition in accordance with IS specification 1868/1962 of Anodic thickness of not less than 15 microns (fifteen) for all sections . All the materials should be got approved by the Engineer incharge before fixing as directed. Size 1.20 x 0.90 m
Supplying and fixing M.S Grill to special windows and ventilators etc using 20mmx6mm angle including cost of MS grill, one of red oxide and fixing in position etc. complete complying with Standard Specification and as directed.
White washing two coats with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.
Painting the newly plastered walls with two coats of exterior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.
Painting new iron work with two coats of synthetic enamel paint of approved quality and colour over one coat of primer in all floors. The rate is inclusive of cost of all materials, labour charges, brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Executive Engineer before use on works)
Paving the floor with the available cuddapah slab of 40mm thick laid over Cement Mortar 1:3 (one cement and three sand) 20mm thick base mortar over the existing floor including cutting to the required size with special cutter wherever necessary, laying in position and pointing the joints to full depth of slabs with same mortar mixed with black oxide and the top surface rendered smooth, curing etc., complete complying with standard specification.
Supplying and laying of profiled colour Galvalume sheet with combination 55AI:43, 4Zn:16SI TCT bend type 0.47mm thick and standard width of 1.06m with yield strength of 550MPA made from high tensile / CR sheets of approved quality for roofing with necessary fixing arrangements like 65mm and long hexagonal head screws with EPDM rubber seal etc., complete complying with standard specification and as directed by the departmental officers.For the above works skilled man power, necessary tools, equipments, power supply, water supply including transport, any other statuary approval required for the transporting the materials shall be duly obtained by the contractor. (Test certificate for quality of Galvalume Sheet should be furnished on receipt of material at site)
Supplying and roofing with Galvalume sheet ridge pieces of size 2.40M x 0.6M, 0.47mm thick with necessary U or J bolt and nuts G.I washers etc., complete For the above works skilled man power, necessary tools, equipments, power supply, water supply including transport, any other statuary approval required for the transporting the materials shall be duly obtained by the contractor. (Test certificate for quality of Galvalume sheet ridge piece should be furnished on receipt of material at site)
G Velu
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_476455.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .