SPECIAL REPAIR TO BLDG NO T 376 BASKETBALL COURT AND PROVN OF CERTAIN SANCTIONED WORKS UNDER AGE BR OF GE NORTH MAMUN

Amount

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified & directed.

Excavation in trenches n. exc 1.50 m wide and n.exc 1.50m in depth for foundation and getting out in any type of soil, complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified.

Removing excavated material exc 250m n exc 500m and deposited where directed at a level not exc. 1.5m above the starting point, complete all as specified.

Spreading & leveling in any type of soil in layers n.exc. 25cm thick, well ramming including watering as required complete all as specified.

Hardcore of gauge not exc 63mm using broken stone or boulders, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified.

M&L Sand cushioning to underground cables complete all as specified in clause 19.75 of SSR Part-I laid before and after laying of cable, complete all as specified.

M&L PCC 1:4:8 (nominal mix), type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified & directed.

M&L PCC 1:3:6 (nominal mix), type C-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified & directed.

Providing, cement concrete type B0 1, 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed .

M&L PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges, benching on chajjas , surface finished even and smooth without using extra cement complete all as specified & directed.

M&L Cement concrete type B-1 (1:2:4) (20 mm graded crushed stone aggregate) as in coping, bed plates and the like including weathering, slightly roundered or chamfered angles and throating, as directed including necessary form work and finishing complete all as specified.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels & drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc complete all as specified and directed.

M&L concrete bed to drain pipes incl forming cadles in cement concrete 1:3:6 type C2 for 200 mm dia pipe complete all as specified and directed.

PCC 1:3:6, nominal mix, type C-1, using 20mm graded crushed stone aggregate as in kerb stone, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

M&L Reinforced cement concrete M-25 ( Design mix) as in foundations including rafts, footings, foundations beams, plinth beams, bases for columns and basement slabs etc complete all as specified and directed.

M&L Reinforced cement concrete M-25 ( Design mix) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L Reinforced cement concrete M-25 ( Design mix) as in beams, cantilever, bressummeres lintels over 1.50m spam complete all as specified and directed.

M&L Reinforced cement concrete M-25 ( Design mix) as in Chajja complete all as specified and directed.

M&L Reinforced cement concrete M-25 ( Design mix) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and directed.

M&L Brick work with fly ash bricks old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius for manhole/septic tank etc built in CM (1:4) all as spd and directed

M&L Brickwork with fly ash bricks, old size straight or curved on plan to any radius in half brick thick walls built in CM (1:4) and as directed.

M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exc. 10cm girth in brick/stone walls, complete all as specified.

M&L for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats all as specified and directed.

M&L 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I 2009 (Larger size to be provided) complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom railon either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and as directed.

Refixing in same opening shutter of any description exc 1.0 sqm but not exc 2.0 sqm each complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as spd.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including flat rough finished surafaces of concrete complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions, square, rectangular or polygonal in shape, including flat rough finished surafaces of concrete complete all as specified and directed.

Form work to sides and soffits of floor and roof beams, beams haunching, girders, bressummers, lintels and cantilever, shelves including supports over hangs etc rough finished surfaces of concrete ( flat ) complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs & similar items including edges rough finished surfaces of concrete ( flat ) complete all as specified and directed.

Formework to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar works, flat rough finished surafaces of concrete; not exceeding 200mm thick (horizontal or sloping) complete all as specified and as directed.

Formwork to edges of concrete flats, treads, , breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs n exc 20cm wide & & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exc 20cm wide rough finished surfaces of concrete complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

M&L Mild steel TMT bars 6 to 10mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, (as in stirrups) hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-310-O or Fe-410-O all as specified & directed.

S&F mild steel as in vertical posts, roof trusses (framed), trussed, purlins, fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces complete all as specified and as directed.

Framed work such as grills, grating, frame for acrylic sheet, welded, drilled holes etc conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Small articles such as band straps, support or stays and similar articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Mild steel screw bolts (machine made) with hexagonal or square head, at one end and screwed the other and fitted with washer and one hexagonal or square nut 11 to 15mm dia bolt n.exc 5 cm long complete all as specified and as directed.

M&L Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

Mild steel 300mm, ordinary rat tail rod pattern door spring including roller and roller plate of mild steel, complete all as specified.

S&F 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC powder coated brackets, funnels etc suitable for single curtain rod, fixed in repair, etc complete all as specified and approved by GE.

S & F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats ( min wt 190 gms) complete all as specified and as directed.

S&F Anodised powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators 114.30 mm x 44.45 x 3.18 mm with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

S&F Anodized aluminium door shutters powder coating (any colour decided by GE) of thk not lesss than 50 micron, aluminium section in which size of shutter top members 47.62 x 44.45 x 3.18 mm , shutter bottom member 100 x 44.45 x 3.18 mm , shutter vertical members 47.62 x 44.45 x 3.18 mm and shutter lock rail member of size 63.50 x 44.45 x 2.40 mm including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos each door, hinges, anodised aluminium snap beading screws etc complete all as specified.

S&F Anodized aluminium powder coated window and ventilator shutters, glazed shutter having stile and rails size 44.60 x 30.00 x 3.18 mm thick with triangular aluminium beading of 15 mm size side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings, such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 Nos) suitable handle (1 No) complete all as specified and as directed.

S&F Brass mortice lock 4-lever vertical type, size 100 mm all as specified.

M&L Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded crushed stone aggregate) back of chowkhats and including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates,rails,braces etc,complete drilled for fixing of steeel sheeting or other covering ,doors,etc, to be prepared for hanging door fittings ( exclusive of steel sheeting or other conering ,running rails and guides) and hangings also fastening and fixing complete.

MS Frame work for cooler stand or samilar work of Fe 410-W(gde E-250) quality 'B', complete all as specified.

S&F prepainted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thk of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as in roof complete all as spd .

S&F Prepainted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members wieght not exc 4 kg per sqm etc complete all as specified and as directed.

Mild steel framed work as in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to Gde Fe 410-0 W ,Grade E-250 quality A complete all as specified & directed.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over II class soft wood fillets and reinforced with G.I. wire mesh (Fillets and G.I. wire mesh paid separately) complete all as specified and as directed.

GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and as directed.

Hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flate 40X30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.

Supply and fixing in repairs to Acrylic sheets 20mm thick including taking down of old sheet of any description complete all as specified and as directed.

M&L 80 mm thick M-40 grade machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006, with grey cement and no pigment, all as specified and as directed.

M&L 60 mm thick M-40 grade machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006, with grey cement and no pigment, all as specified and as directed.

M&L 75mm thick cement concrete type C2 1:3:6 (40mm graded aggregate) as in sub floors,sub bases,floors and pavings etc all as specified and as directed.

M&L 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement (liquid water proofing compound shall be measured and paid separately ) complete all as specified and as directed .

M&L APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Supply only liquid water proofing compound.

M&L Cement concrete type C-1, 1:3:6 (using 12.5mm graded crushed stone aggregate) as in plinth protection 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring complete all as specified and as directed.

M&L 25 mm thick PCC ,type B-1(using 20mm graded crushed stone aggregate) as in flooring cmplete all as specified and as directed.

M & L screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n exc .11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement. all as spd and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete all as spd & directed.

M&L Machine cut kota stone in flooring 18-20 mm thick over and incl 20 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete and moulding at edge if reqd all as spd and directed.

M&L 18-20 mm thick Kota stone tiles (Pre-mirror polished), in riser of steps, skirting,dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles including rounding the edges of kota stone over and including 10mm thick backing coat in cement mortar (1:4), surfaces finished even and rough to receive tiles, all as specified and directed.

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed.

M&L for 75 mm thk PCC 1:4:8 type D-2 (40mm graded crushed stone aggregate) as in subbase to flooring complete all as specified and directed.

M&L for 75 mm thk PCC 1:2:4 type B-1 (using 20mm graded aggregate) to flooring finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L 10 mm thick light shade vitrified ceramic tiles (square/rectangular) polished, area of each tiles not exceeeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

12mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 10mm 1:3 rendering on backing coat etc all as spd.complete all as specified and as directed.

M&L Rendering 10mm thick on fair faces of brick work or conc surfaces cement plaster in CM 1:4 finishing fair and even complete all as specified and as directed.

M&L for 10mm thick plaster in cement mortar 1:3 finished even and smooth without using extra cement mixed with water proofing compound complete all as specified and as directed.

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.

Preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified.

Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, and applying two coat of cement base paint including curing complete all as specified & directed.

Preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer, complete all as specified.

M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L two coats of synthetic enamel paint on old steel surfaces of any description, n.exc 10 Cms in width or girth, including preparation of surfaces, complete all as specified and directed.

Painting to line, dashes, arrows, letter etc to pcc flooring with arcylic emulsion paint exterior grade incl preparation of surface and and the like n.exc 10cm wide complete all as specified and as directed.

M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.

4 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.

Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

S&F 25mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

Stop valve concealed cast copper alloy (ISI Mark) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 20mm bore dia, complete all as specified and directed.

Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.

Angular Stop valve cast copper alloy (ISI Marked) fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.

S&F Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated complete all as spd and directed. Make - Jaquar , Marc and Johnson

S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified & directed. Make - Jaquar , Marc and Johnson

S& F CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as spd and directed. Make - Jaquar , Marc and Johnson

S&F Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms) Make - Jaquar , Marc and Johnson

S&F toilet paper holder chromium plated fixed in repair to wall with CP screwcomplete all as specified.

S&F in repair towel rail CP 600 mm long complete all as specified and directed.Make - Jaquar , Marc and Johnson

S&F Jet Spray (with 1.50 mtr tube) fixed to EWC and Angular Stop Cock complete all as specified and directed.Make:Paryag/Polytech.

S & F Vitreous china wash basin(Oval Shape), white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe including waste copling 32mm size full thread , all as spd and directed.

S&F Vitreous China squatting pan of orissa pattern, size 580x440mm white with supply and fixing of CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed.

S&F Vitreous China wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, fixing with screws of suitable size, plastic seat cover, white closed pattern with flat bottom and cover, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, complete all as specified.

S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets,incl supply and fixing PVC flush pipe 32mm bore of polyethylene of low or high density complete including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

S&F Viterous china urinals, half stall type, incl CP coupling, waste pipe and all necessary fittings, complete incl providing and fixing plugs , bedding urinal against wall in CM 1:2 , securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. Make:Paryag/Polytech

M&L Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified & directed.

Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified & directed.

S&F sinks with double bowls made of stainless steel 2mm thick colour black kitchen with plugs, washers , PVC waste pipe including 2 Nos waste copling ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 820x450mm x 230 mm bowl size complete all as spd & directed.

S&F 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F 50 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed .

S&F 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed .

S&F 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and as directed .

S&F Cast Iron Branch peices, Double (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete , ISI Marked all as specified & directed.

Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete , ISI Marked, fixed in repairs all as specified & directed.

S&F CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified.

S&F cast iron cowl for 75 mm dia complete all as specified and as directed .

S&F cast iron cowl for 50 mm dia all as directed .

S&F cast iron Swan necks (or offsets) upto 152mm projection for 100 mm to 75 mm pipe complete all as specified and as directed .

S&F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 75 mm dia of pipe complete all as specified and as directed .

Factory made RCC manhole cover with frame ( for manhole iner opening 60 cm) complete all as spd and directed.

M&L 200 reinforced cement concrete pipes class NP2 with one collar per length of pipe complete all as specified and as directed.

Construction of septic tank for 25 users (Brick construction with sub class 'B' bricks using old size bricks), earth work in any type of soil,Foundation in PCC1:2:4, Brick work in CM 1:4, RCC slab covers Incl RCC Precast manhole cover having 6 mm Plate embeded all around/ fibre reinforced cover with Angle Iron frame vent Shaft and Sludge chamber etc complete all as specified and shown on drawings No CEPZ/TD-013/13 Sheet 1/5 to 5/5 Dated 11.09.13.

M&L Construction of Soakage well 2.40 m dia and 3.0 m deep below (Brick construction with sub class 'B' bricks using old size bricks) inlet pipe level (depth from ground level to below the inlet pipe 45 cm) , earth work in any type of soil , foundation in PCC 1:3:6 , wells of Honey combed and Solid in M-25 Concrete, Incl Intercepting Chamber , screen Chamber Brick work in cement mortar , RCC cover slab in M-25/ filling with brick bats, complete all as specified and shown on drawings No CEPZ/TD-013/13 Sheet 1/5 to 5/5 Dated 11.09.13.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed.

Dismantling asbestos cement (corrugated semi corrugated) etc. sheets in roof covering etc complete all as spd.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as specified and as directed.

Dismantling wrought iron or mild steel work of any description etc complete all as specified and as directed.

Taking down carefully unsv aluminium point wiring light/fan/socket or power complete and including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc) and removing material from site and making good to the disturbed surface matching with existing specification complete.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit /existing conduit of appropriate size but not less than 20mm dia with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, with inner, outer frame plates including metal flush shunken boxes with zinc oxide plated suitable size for mounting switches, sockets, fan regulators etc connecting earth dolley with PVC unsheathed flexiblke copper conductor green in color and making good to the disturbed surface of wall/floor and matching with existing specifications for the One light /fan/bell point controlled by one switch.

All as per Srl item No 157 above but one 5 pin socket outlet 5 Amps on independent board with separate switch 6 Amp one way.

All as per Srl item No 157 above but one 5 pin socket outlet 5 Amps on same board with separate switch 6 Amp one way.

All as per item No 157 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

Supply and Fixing the modular switch piano type flush button single pole 16 Amp one module, front operated.

Supply and Fixing the modular socket 2 module 2 in 1, 6/16 pin combimed pin 16 Amp.

Supply and Fixing the modular switch piano type flush button single pole 10 Amp one module, front operated.

Supply and Fixing the modular socket 2 module 2 in 1,5 pin combimed pin 6 Amp.

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals.

S & F Modular type bell push 10 Amp 1 module, complete all as specified and directed.

S&F Bell electric heavy duty Ding Dong AC 230 Volt, single Pole etc complete all as specified and directed.

S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 100W- 2 module including necessary connections complete all as spd and directed.

Taking down ceiling fan/Exhaust fan by disconnecting the electric connection and dismantling the blades and removing n from ceiling/roof of bldg by descrewing the nut bolt and all as specified and directed.

Rehanging only of ceiling fan and connecting up including provision of PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50Sqmm from ceiling rose or connector to fan including minor repairs such as replacement of locking pin, reel insulators, bolts, nuts etc and spraying one coat of synthetic enamel paint of required color all as pewr required and directed.

Supply and fixing the bulk head light fitting LED type 10 watt complete with lamp and having IP-63 protection and fixing on wall/ceiling complete with all accessories and including connecting up with ceiling rose by using PVC insulated and overall sheathed flexible copper conductor cable 3 core 0.50 Sq mm.

S & F in replacement LED batten alongwith LED T8 tubular lamp 20W Linear LED T8 tubular lamp with extruded aluminium/pc body and PC diffuser and inbuilt driver, 230 volts wall mounted complete with all accesssories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down old unsv tubelight fitting any type.

Supply and Fixing the wall mounted type fancy light fitting with 8 watt LED bulb and with decorative diffuser and mounting clips and lamp holder , wall mounting arrangment and all as specified and directed.

S & F mirror light 07 watt LED type with all accessories including inbuilt lamp connecting electrically to ceiling rose using cord flexible 3core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required.

S & F decorative wall mounting bed side light 3 watt fitting LED type having flexible neck all as specified and directed.

Supply and Fixing the Venti air fan AC single phase 230/240 volts 0f size 300mm sweep with loure of metalic body with grouting with nut bolts and making the suitable hole suitable for 300mm sweep exhaust fan by breaking the existing wall and making the plastering and matching with existing surface / specification and all as specified and directed.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 2+6 way double door open able complete, including taking out old unsv MCB DB any size/type.

S&F 6 to 32 A SP MCB single pole 240 V 10 KA C Series.

S&F MCB single pole with natural 240 volts 40-63 Amps C series.

S&F 40-63 A SP MCB single pole 240 V 10 KA C Series.

M&L for sub main wiring in replacement with FRLS PVC insulate sheathed 2 x 6 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into PVC concealed conduit with 6.0 sqmm PVC insulated green copper cable for continues earth PVC pipe not less than 20 mm dia with all accessories complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.

Supply and fixing star rated ceiling fan 230 volts,single phase of 1200mm sweep double bearing type including down rod,canopy cover etc and connecting with 3core flexible copper conductor of 0.50 sq mm and including writing of MES No with black enamelled paint complete all as specified and as directed.

Supply and Install the electric water heater storage type 25 Ltr capacity 5 Star rated of ABS body vertical type glass lined of inner tank and heating element and having the wall mounting arrangement,thermostate,indicators and thermally insulated stainless steel tank of glass lined inside the tank and heating element with complete connection of water & testing and all as specified and directed.

S & F Sheet metal enclosers with single pole and neutral enclouser with two pin and earth plug and socket complete with one MCB 20 Amp 240 Volt.

S & Fixing High performance IP 66 LED Street lights of 20 watt complete with all fixing arrangement all as directed and specified by Engr in Charge.

S&F sheet metal enclosures double door VTPN MCB DB 4 way 415 V AC, 50 Hz with 250Amps rated copper bus bar complete with IP 43 protection suitable for flush mounting including 100Amps MCCB 3Pole with breaking cap 16kA as incommer and MCBs as outgoing complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core complete all as specified and as directed.

M/L for tube , light grade galvanised with all fittings laid in trenches/through wall / under road or floor of 40 mm bore complete all as specified and as directed.

Supply and fix in replacement single phase temper proof Electric Energy meter with LCD display 240 volts 2 wire system, 10-60 amps, 50 HZ having accuracy class 1.00 as per IS-13779 complete with all standard anti temper features including logging & display of tamper data complete including sealing properly using lead seals and wires and taking out the old unsv meter and deposit the same at MES store yard and complete all as specified and directed .

Disconnecting outer and inner unit of Split AC unit of size 2TR from electric circuit and shifting and fixing to a new location with complete electric connection and interconnection between inner and outer unit including gas charging complete all as specified.

M & L for well burned bricks , laid flat ( old size) sub class B designation 75 for cable protection copmplete all as specifed and directed.

S & Fixing LED street light with pressure die-cast housing along with prismatic polycarbonate diffuser and LEDs with secondary optics and IP 65 protection complete with all fixing arrangement copmplete all as specifed and directed.

S&F double door TPN DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 4way double door open able copmplete all as specifed and directed.

S & F MCB Triple pole with netural 415 volts 40-63 Amps 'C 'series complete all as specified and as directed.

dadwal engineers

Raghbir chand

M/S J N TRADERS

M/S DUGGAL CONSTRUCTION CO

Walia trading co