Development of Infrastructure and Computational facilities for Numerical Simulation under NHP at CWPRS Pune 24

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to entre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws@ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks)

Providing and fixing vertical vinishing blinds (vista cascade) in approved shade/colour/pattern including necessary framing and operation arrangement for raising and lowering etc. All complete and as directed by site Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) :For fixed portion

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float opaque glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm)

Providing and fixing 12 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.

Providing, installation of high end computing device which includes top end analyzing and visualizing unit facilities with memory and power backup arrangements in a framed structure (Rack) along with LAN and Network connectivity and Antivirus Protection as per the specifications mentioned in Annexure I and also testing and commissioning of high end computing device in all respect as directly by Engineering-in-charge/ model officer and 5 years warranty for repair and replacement of faulty parts should also be provided.

Providing, installation, testing and commissioning of A3 size Printer as per the specifications mentioned in annexure II and also testing and commissioning of Printer in all respect as directly by Engineering-in-charge/ model officer and 5 year warranty for repair and replacement of faulty parts should also be provided.

Providing, installation, testing and commissioning of Portable high end analyzing and demonstration computational facilities which includes top end analyzing and visualizing unit facilities as per the specifications mentioned in Annexure IV and also testing and commissioning of computer device in all respect as directly by Engineering-in-charge/ model officer and 5 year warranty for repair and replacement of faulty parts should also be provided.

Providing and fixing 2.0 ton split AC including copper pipe, drain pipe, electrical cabling, fabricated stand etc. with commissioning and testing all complete as per the following specification and as directed at site by Engineer-in-charge: Specification: cooling capacity 18000 BTU / Hr.: Air flow (high / low) 1000/ 830 CMH: Noise level 43 dBA (maximum), power supply: 230 V / 1 Phase and Rotary / Reciprocating compressor: 5 star rating

Providing and fixing 1.5 ton split AC including copper pipe, drain pipe, electrical cabling, fabricated stand etc. with commissioning and testing all complete as per the following specification and as directed at site by Engineer-in-charge: Specification: cooling capacity 18000 BTU / Hr.: Air flow (high / low) 1000/ 830 CMH: Noise level 43 dBA (maximum), power supply: 230 V / 1 Phase and Rotary / Reciprocating compressor: 5 star rating

Providing, fixing/ installation with commissioning and testing of Luminaries 600 mm x 600 mm suitable for recessed mounted application comprises of CRCA housing in white powder coated finish 36 to 40 watt. all complete and as directed at site by Engineer-in-charge:.

PENTAGON SYSTEM AND SERVICES PVT. LTD.