REPAIRS TO FLOORING PLUMBING SANITARY FITTINGS AND INTERNAL ELECTRIFICATION IN ZONE B MD ACCN AREA AT INS RAJALI NAS ARAKKONAM

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish removed outside the Defence land complete all as specified.

M & L for plain cement concrete type B2 1:2:4 (using 20 mm graded aggregate) Cement concrete in foundations, filling and mass concrete, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars, posts etc...complete all as specified and directed.

M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge.

M & L for Glazed Cereamic tiles on vertical surfaces 300 x 450 mm size over 10mm thick screed with neat cement slurry of CM 1:3.

Supply and fix in repair coloured vitreous china wash down water closet pan (pedestal pattern) including Vitreous China valveless,syphonic action type, coloured flushing cistern, 10 litre capacity, low level with inlet, ball valve,float and handle including bracket, flush pipe of polyethylene of low or high density of PVC 32 mm dia,for low level cisterns and Plastic water closet seat,black,closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device including jet spray complete all as specified and directed

S&F In repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed.

S&F in repairs Brass CP shower rose 125mm dia size with or without swivel joint for fixing with 15mm pipe complete all as specified and directed.

M&L in repair Vitreous china wash hand basin, white, flat back of size 550x400mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, as in repairs, complete all as specified and as directed by Engineer-in-Charge.'

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes, with coupling including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and as directed by Engr-in-charge.

S&F in repair bib tap 15mm chromium plated long body with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by the EIC .

S&F in repairs 15mm pillar tap cost copper alloy with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed by the EIC.

S&F in repairs Stop / angle cock 15mm chromium plate screw down screwed for iron pipe of brass ferrule etc complete all as specified and directed by EIC

S & F of 32mm dia Flexible Waste hose for WHB / Sink / urnial etc…complete all as specified.

S & F Cast iron Nahani trap of 100 mm diameter with grating with or without hole including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

S & F of 15mm dia Flexible Connection hose for WHB/ Flush tank complete all as specified.

S&F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges etc. With pair of brackets complete all as specified and directed by Engr-in-Charge.

S&F in repair of rotational moulded polyethylene water storage tanks of capacity 225 ltrs (Rectangle shaped with closed top and fixed in loft portion of the kitchen ) hoisted and fixed in position all as specified in SSR Pt-I

Taking up or down steel tubing and connections of 15 mm dia complete all as specified and directed.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 15mm bore including cutting /chasing in walls etc.

Taking up or down steel tubing and connections of 20 mm dia complete all as specified and directed.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore including cutting /chasing in walls etc.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as directed and specified by Engr-in-Charge

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as directed and specified by Engr-in-Charge

S&F PVC (SWR) 75 mm bend to be jointed with pipe line as specified and directed by Engr-in-Charge

S&F PVC (SWR) 110 mm bend to be jointed with pipe line as specified and directed by Engr-in-Charge

S & F in repairs 15mm dia bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster on brick walls including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with approved WPC, finished even and fair.

M & L for complete removal of existing treatment from old decorated plastered surfaces by Vacuum based sanding machine, removal of nails, moulds, moss and efflorescent etc & filling cracks/hole with putty as required and applying wall care putty upto 1mm thick (Multipurpose mixer shall be used for uniform and propper mixing of putty) and two coats of Oil Bound Distember white or tinted over one coat primer with roller application complete all as specified and as directed by Engr - in - Charge.

M & L for preparation of new plastered surfaces applying wall care putty upto 1mm thick (Multipurpose mixer shall be used for uniform and propper mixing of putty) and two coats ofOil Bound Distember white or tinted with roller application complete all as specified and as directed by Engr - in - Charge. oil bound distemper white or tinted over a coat primer over one coat Putty complete all as specified and as directed by Engr-in-charge.

M & L for 2 coats of white washing on ceiling on old decorated surfaces one under coat and one more subsequent coat

Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms of 25 mm thickand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S & F in repair stainless steel plate rack of size 750 mmx 910 mm x 250 mm with separators and 3 tier shelves provisioning of hook 9 nos made out of stainless steel sheet of grade AISI 304 and fixed in repairs complete all as per Pryag or equilent all as specified and directed by Engr-in-Charge

S & F Plywood of 12 mm grade BWR, type BB, fixed with screws to timber frame work

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed

S & F powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 and minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised luminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S & F 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed

Note : All the items ( 1- 39 ) to be executed in building with a height anywhere upto 26 m (G+5) as directed and specified by E-in-C

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed.

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- Make of cable : Plaza/Polycab/Finolex/ Havells

One light/ fan/ exhaust fan/ 3 pin socket independent board/ buzzer point controlled by one switch.

One 3 pin socket outlet 5 Amps,same board with cables 1.5 Sqmm size.

One light point controlled by two 2- way switches, with cable 1.5 Sqmm size.

All as per item ser no-42 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board/AC/ Geyser with cables 4.0 Sqmm size.Make :- Polycab/Finolex/Plaza/Havells

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC casing & caping/fixed on wall/roof/ceiling etc of size not less than 20 mm dia including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :- Make for PVC casing & caping: SUDHAKAR / AVON PLAST /PLAZA , Make for Copper cable: Finolex/Polycab / Plaza.

One light point controlled by one switch.

One 3 pin socket outlet 5 Amps, indipendent board with cables 1.5 Sqmm size.

All as per item ser no-44 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board/AC/Geyser with cables 4.0 Sqmm size. Make :- Polycab/Finolex/Plaza

M&L for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface/concealed /PVC conduit of appropriate size as specified for the following sizes. Note:- : 1. Cutting chases for concealed wiring shall be measured and paid seperately. 2. Rates are including taking down old unserviceable. Make for Copper cables: Finolex/Polycab / Plaza/ Havells. Make of PVC Conduit: SUDHAKAR/FINOLEX/AVON PLAST.

2x 4.0 sqmm and 1x 4.0 sqmm as earth wire

2x 6.0 sqmm and 1x 6.0 sqmm as earth wire

2x 10.0 sqmm and 1x 10.0 sqmm as earth wire

4x 10.0 sqmm and 2x 10.0 sqmm as earth wire

4x 16.0 sqmm and 2x 16.0 sqmm as earth wire

4x 25.0 sqmm and 2x 25.0 sqmm as earth wire

S&F in repair for switch piano, flush type single pole , one way 6 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for switch socket combination 2 in 1, 5 pin, 6 Amp flush type complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for socket outlet 5 pin, 6 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for socket outlet 6 pin, 16 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for bell push flush type, 6 Amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for switch piano, flush type single pole , two way 6 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for switch socket combination 2 in 1, 6 pin, 5 and 15 Amp flush type universal complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S & F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc and including taking down old all as specified and as directed by Engr-in-Charge . Make: Anchor/Cona/Leader/Lisha.

Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. all as specified and as directed.

Supply and fixing in repair of GI metal flush box suitable for mounting moduler plate of following modules:-

1 or 2 Module

3 Module

4 Module

6 Module

8 Module

12 Module

Supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for following modules:-

Cover plate with frame 1 Module

Cover plate with frame,2 Module

Cover plate with frame,3 Module

Cover plate with frame,4 Module

Cover plate with frame,6 Module

Cover plate with frame,8 Module

Cover plate with frame,12 Module

Supply and fixing in repair of modular switch one way 6A white Active one module all as specified and as directed by the Engineer-in-Charge

Supply and fixing in repair of modular switch socket combination 16 A, 6 pin 3 module flush type Active white two module complete all as specified and as directed by the Engineer-in-Charge .Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of modular switch socket combination 6 Amp, 5 pin flush type Active white two module complete all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of modular fan step regulator,120 W-2 module all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of modular socket 6A, 3 pin combined two module all as specified and as directed by the Engineer-in-Charge

Supply and fixing in repair of modular socket 16A, 3 pin combined two module all as specified and as directed by the Engineer-in-Charge

Supply and fixing in repair modular bell push 6A one module complete all as specified and as directed.

Supply and fix Eco compact wall mounted LED batten for T8 LED tube CAT CROMPTON DIJB12LT8-20 with ULTRON high efficency LED polycarbonate tube with in built driver and metal heat sink 18 watt icluding taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge.Make : Crompton LT8-20-865(2) /philips/wipro/Havells.

Supply and fix high efficiency wall mounted LED batten type polycarbonate tube of 9W 2 ft LED and including taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge . Make : Havells LHEXACP7IN1W010 or equivalent model of Philips/Crompton/wipro/ Surya.

Supply and fix Energy saving not less than 25 Watts LED light fitting ,IP65 powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damaged all as specified. Make Surya/Havells/Philips/CROMPTON.

S&F sheet metal enclosure vertical TPN MCCB DB 4 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCCB and MCB's (ii) MCCB and MCBs shall be measured and paid separetly under the respective item of shedule. Make: Legrand/ Siemens/Scheneider/ABB.

S&F sheet metal enclosure vertical TPN MCCB DB 8 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCCB and MCB's (ii) MCCBs and MCBs shall be measured and paid separetly under the respective item of shedule. Make : Legrand/ Siemens/Scheneider/ABB.

S&F sheet metal enclosure vertical TPN MCCB DB 12 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCCB and MCB's (ii) MCCB and MCBs shall be measured and paid separetly under the respective item of shedule.Make: Legrand/ Siemens/Scheneider/ABB.

S&F sheet metal enclosure Horizontal TPN DB 8 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCB's (ii) MCBs shall be measured and paid separetly under the respective item of shedule. Make : Legrand/ Siemens/Scheneider/ABB.

S&F MCB,DB SPN 12 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB.

S&F MCB,DB SPN 08 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule. Make: Legrand/ Siemens/Scheneider/ABB.

S&F MCB,DB SPN 04 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB.

S&F MCB,DB SPN 02 way in SS enclosure type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB.

Supply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & fixed Magnetic setting type 250 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB.Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & Fixed Magnetic setting type type 200 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB,Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V, Fixed thermal & Fixed Magnetic setting type type 150/160 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB, Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V, Fixed Thermal & Fixed Magnetic setting type type 125 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V,adjustable Thermal & Fixed Magnetic setting type type 100 Amps with breaking capacity 10 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V,adjustable Thermal & Fixed Magnetic setting type type 63 Amps with breaking capacity 10 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCB TP 415 V, 40-63 Amps with breaking capacity 10KA B curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix in repair for MCB TPN 415 V, 63-100 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA B curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA B curve complete all as specified and as directed by Engr-in-chargeMake: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

S& F for sheet metal enclosure double pole and neutral with a two pin and earth plug and socket complete with one SP MCB 25-32 Amps. Make: Legrand/ Siemens/Scheneider/ABB

Material and labour for Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level , with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected with and incl GI earth wire 4mm dia including alternate 5 layers of charcoal, salt crystal and including 15 mm dia GI pipe light grade by means of nuts, bolts, washers and necessary earth work upto 7.5 mtr and connecting to test point, LT Switchgear etc as per site requirement including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in elecrical plate No 3 of SSR Pt- I including testing on completion complete all as specified and as directed. Note:(i) Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil , site clearance etc.

M&L for GI Pipe 15 mm light grade galvanised, with all fitting laid in trenches all as specified and directed

M&L for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes all as directed by Engr in charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 24-30 watt, 220 V AC cool white, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC warm white colour, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F for Rigid PVC junction box three way 25 mm surface mounted four hole type for 5 Amp independent board complete with screw not and bolt all as specified and as directed by Engr-in-Charge

S&F for Rigid PVC junction box three way 32mm surface mounted four hole type for 15 Amp independent board complete with screw not and bolt all as specified and as directed by Engr-in-Charge

Supply and fix for Round recessed mounted LED panel luminire not less than 12 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton Cat pt LCDEP-18-CDL / LSDEP-18-CDL .

Supply and fix for Square recessed mounted LED panel luminire not less than 12 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton Cat pt LSDEP-15-CDL / LCDEP-15-CDL .

Supply and fix for round/ square recessed mounted LED panel luminire not less than 9 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton Cat pt LCDEP-09-CDL / LSDEP-09-CDL .

Supply and fix BEE Rated LED Lamps 10W - B22 / E27 Crompton/Bajaj/Usha

Supply and fix BEE Rated LED Lamps 20W - B22 / E27 Crompton/Bajaj/Usha

Supply and fix for Buzzer, sound output Ding Dong, high ouyput speaker for noticable sound, white colour, AC, 240 volts, 50 Hz, single pole. Make: Anchor, GM

SIVA ENTERPRISES (BID ID -3384243)

gandhie constructions (BID ID -3384225)

SUSII CONSTRUCTIONS (BID ID -3383758)

RK CONSTRUCTION (BID ID -3384786)

R.P.TRADERS (BID ID -3385567)

Green Ray Technologies (BID ID -3384450)

NLK Construction (BID ID -3384474)

SRI SHIVASHAKTHI CONSTRUCTION (BID ID -3384122)