REPAIRS TO FLY PROOFING, KITCHEN CABINETS, ALMIRAHS, DOORS AND MISC B/R WORKS IN OTM AND MD ACCN UNDER AGE B/R LEKHANAGAR OF GE NRC

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as directed. Note: MS hold fast/ lugs or SS dash fasteners shall not be measured and paid for separately and is deemed to be included in quoted rates.

S&F factory made decorative type single extruded WPC (Wood Polymer Composite) flyproof door shutter 30 mm thick comprising 100 mm wide stiles, 100 mm wide top rail, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide intermediate rails, manufactured from virgin PVC polymer (K-value 58–60, suspension grade), calcium carbonate, natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives, having minimum density of 650 kg/cu.m, minimum screw withdrawal strength of 1800 N (face) and 900 N (edge), minimum compressive strength of 50 N/mm², modulus of elasticity not less than 850 N/mm², Class 'A' flame-retardant, termite, borer and moisture resistant. The shutter shall be laminated on both faces with minimum 14-micron PVC foil of approved shade and design using hot-melt adhesive and provided with four decorative flyproof panels, each 300 mm high, fitted with SS 304 woven wire mesh conforming to IS 1568, having 0.56 mm diameter stainless steel wire with aperture as specified in IS 1568, fixed with WPC glazing beads and stainless steel screws. The shutter shall be fixed to frame with stainless steel butt hinges of approved size using full-threaded stainless steel countersunk screws and shall include all necessary stainless steel fittings and fixtures complete, all as specified and directed.

Dismantling kitchen cabinets board any thickness, including cover fillets, frame etc.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 60x30mm (single/double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as directed over and including MS hold fast/ lugs or SS dash fasteners.

M&L for factory made 18 mm thick 100% Solid WPC (wood polymer composite) Prelaminated board of required size comprising of virgin PVC resin of K value value 57-60 (suspension grade), Calcium carbonate and natural fibers (wood powders/rice husk/wheat husk) and non toxic additives, made from extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cum, having good screw holding capacity (screw withdrawal strength of 200 N (Face) & 1100 N (Edge), minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/borer free, water/moisture proof, Fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed countersunk SS screws all asdirected. Note. The quoted rate shall also be deemed to be inclusive of suitble SS handles, autoclosing SS hinges, magnetic catcher, telescopic channel etc complete all as specified and directed.

Dismantling of old wire basket/Kitchen trolley of any size and description including all fittings and fixtrures.

S&F in repair factory made 100 % Prelaminated solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg/cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet complete as per manufacture specification.

S&F in repair factory made 100 % plain solid wood plastic composite (WPC) flush type shutter of 18mm thickness consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg/cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet complete as per manufacture specification.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.