Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Rejected-Technical | Rejected-Technical Not fulfills similar nature of work |
Tender Value
₹14.6 L
EMD Value
₹29,120
Closing Date
26 Jul 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chairman GB
3rd floor VS Bhavan
External repair work/ Building work with external finishes
2022_DCSEM_698554_1
DCSEM/CQD/QSB/ NIT/32/22-23/ dt. 04.07.2022
Open Tender
Civil Works
Item Rate
183 days
Anushaktinagar, Mumbai
Please refer tender documents
5 documents required · 5 mandatory
₹0
₹29,120
11 Oct 2022
4 Jul 2022
29 Jul 2022
4 Jul 2022
26 Jul 2022
12 Jul 2022
4 Jul 2022 - 8 Jul 2022
Amount
Abstract Sheet
Civil work - Main items
Description of Work / Item(s)
Amount
Civil work - Main items
Providing and erecting double bamboo scaffolding using minimum 50 to 75mm dia best quality bamboos tied with coir rope and the horizontal and vertical members of the bamboos to be provided as required at spacings of not more than 900mm apart both horizontally and vertically including providing cross supports as struts to the scaffolding properly to the building for maintenance/ repair works of external surfaces of buildings as and when required including providing necessary safety belt and helmet to the workers, dismantling the scaffolding and taking back the scaffolding, safety belt and helmet after the repair works are completed including cost of transportation, labours, bamboos etc. complete all as per specifications and directed by the EIC.
a) Double bamboo scaffolding
Repairs to damaged RCC structural members at all locations/ floors using polymer modified cementatious mortar, for strengthening the existing RCC structural members using polymer (dept supply at fixed rate) and comprising the following operations: i) Breaking cracked / spalled concrete members along the cracks with plaster, including removing and stacking of all unserviceable material at site, simultaneous transportation and disposal of debris outside colony etc. complete all as per specifications and as directed by the Engineer-in Charge. ii) Exposing and cleaning the reinforcement thoroughly by light tapping / wire brushing of using strong emery paper and finally by acetone /rust remover of Dr. Fixit / Anuvi chemicals / Fosroc or other eqivalent. iii) Applying a coat of polymer and cement slurry in the ratio 1:1 by volume to the reinforcement bars.
a) Building up with polymer modified cementatious mortar for RCC structural members etc. in layers not exceeding 20 mm in a day (proportion – cement 50 Kg. : Silica sand 125 Kg. : polymer liquid 10 ltrs.) with necessary bond coat (polymer : Cement = 1:1 by volume) for tack coat and also for subsequent layers using polymer including curing, covering the flooring /window with tarpaulins or equivalent covering material to avoid deposition of polymer mortar and cleaning of floor / windows thoroughly on completion of repair work etc. complete all as per specifications and as directed by the Engineer-in-charge Note: 1) Measurement shall be taken as per Litre consumption of polymer liquid only for above mentioned operations. 2) Polymer required for the work shall be issued by the Department under Schedule 'B' 3) Bond coat should be applied @ 0.37 ltr./layer/sq.m. 4) Minimum FM of silica sand should be 2.10
Sand faced cement plaster 20 mm thick in CM 1:4, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Build well' Ready mix plaster of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/ Readymade Polymerised Drymix plaster -Silicoplast of M/s. Precise Conchem Pvt.Ltd. or other approved make, suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 12 mm thick and finishing coat of 8 mm thick final rendering,including using richer mix for making corners if necessary, at all floors and levels, including making grooves of existing size wherever required, including cleaning the surfaces, including membrane curing by applying one coat brush, roller or spray using acryalic based curing compound i.e. Resikure of M/s Anuvi Chemicals/ Concure Of M/s FOSROC or other equvalent ( as per manufacturer's specification ) including removing existing damaged/ worn out plastering by mechanically means or manually and disposing off debris outside colony etc. complete all as per specifications & as directed by the EIC. NOTE:1. The contractor must take full precautions that original brick work is not damaged while dismantling of plaster. In case of any damage the same shall be made good with 22g chickenwire mesh at his own cost . No separate payment for any additional thickness of plaster if any will be made. Contractor must visit site and acquaint himself with the condition of building.
Providing and fixing in position white marble stone drip mould of size 1200mm to 1500mm length, 150mm wide & 18mm thick, 100mm wide ,embedded into masonry/ concrete and 50 mm exposed out side including making chases in wall, exposed edge machine cut & machine polished grouting with cement mortar 1:1 mixed with approved water proofing compound, sealing the joints for water tightness finished smooth to proper level, hand polishing after laying, curing etc. complete all as per specifications and as directed by the Engineer-in-Charge.
Providing and applying shrinkage crack filler of Dr.Fixit Crack X Paste or other equaivalant material including opening the loose part of the existing crack , making the same in V - shape in required depth & width, cleaning the groove by removing dust, oil, grass, loose particals etc., press the crack filler in to the crack one time only with a spatula or putty knite and level the surface etc. completed all as per manufacturer's specifications and as per direction of the engineer-in-charge.
Plain cement concrete 1:2:4 using graded stone aggregate of 20mm max. size at all floors, levels and locations including machine mixing, laying, consolidation, finishing, curing, etc. complete all as per specifications and as directed by the Engineer-in-Charge.
Brick work 230 mm thick in super structure Class designation 75 in cement mortar 1:4 using well burnt locally available bricks of approved quality including scaffolding, raking out joints, curing etc. complete all as per specifications and as directed by the Engineer-in- charge.
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .