REPAIR AND MAINT TO FLOORING, ROOFING, JOINERY, CEILING ETC IN MD ACCN AT JAK LI RC UNDER GE 970

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by engineer in charge.

Supply & fix pre-painted galvalume aluminum zinc coating GI Based corrugated steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

All as per item No 02 out except sheeting (any thickness) complete all as specified and directed by engineer in charge.

Supply & fix pre-painted galvalume aluminum zinc coating GI Based plain steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

Supply & fix pre-painted galvalume aluminum zinc coating GI Based corrugated steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

Supply & fix 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugations side lap bent to curve/shape, fixed with coach screws and washers or with L/J type hooks in roofs, wall or gate/door covering etc. with grade of zinc coating 275 complete all as specified.

All as per item No 06 but except sheeting (any thickness) complete all as specified and directed by engineer in charge.

Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer over new zinc (or galvanised) surface to receive painting by coating with mordant solution including washing & cleaning etc, complete all as specified and directed.

Material & labour for preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick plain cement concrete 1:3:6 type C2, using (40mm graded stone aggregate) as in sub base of floors over and incl earth filling complete all as specified and directed by engineer in charge.

Material & labour for 50mm thick PCC (1:3:6) type C-1 ( using 20mm graded stone aggregate) as in plinth protections and path etc finishing the concrete surfaces even and smooth without using extra cement & joint filled with bitumen sand mixer 50mm thick complete all as specified and directed.

Material & labour for 100mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in flooring forpath steps etc. finished even & fair without using extra cement complete all as specified & directed.

Material & labour for coloured ceramic joint less non skid tiles 7 to 8mm thick, as approved, polished area of each tiles exc 0.18 Sqm but n.exc. 0.38 Sqm (square/ rectangular) as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed.

Material & labour for coloured ceramic non skid tiles 7 to 8mm thick, as approved, polished area of each tiles exc 0.11 Sqm but n.exc. 0.18 Sqm (square/ rectangular) as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed.

Material & labour for vitrified ceramic tiles 10mm thick, dark shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square / rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed 15mm thick in cement mortar (1:6) finished rough to fix tiles complete all as specified and directed.

Material & labour for Johnson endura paving tiles of technocommercial or equivalent of size 300x300x10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed 20mm thick in cement mortar (1:4) finished rough to fix tiles complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ china moisac including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Material & labour for glazed ceramic coloured tiles of size 450 x 350 x 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Material & labour for glazed ceramic white/coloured tiles of size 300 x 200 x 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Dismantling brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by engineer in charge.

Material & labour for bricks work using sub class `B’ bricks straight or curved on plan to any radius built in cement mortar 1:4 exceeding 6m radius complete all as specified and directed.

All as per item No 22 above but except bricks complete all as specified and directed by engineer in charge.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by engineer in charge.

Material & labour for 15mm thick cement screed on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, in sunken floors, walls etc. ,surfaces finished even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid seperately).

Supply only integral water proofing compound.

Material & labour for 15mm thick cement screed on brick or concrete surfaces in cement mortar (1:4) , surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

Material & labour for preparation of old plastered surface of wall and applying one coat of cement base paint on plastered and other surfaces complete all as specified and directed.

M&L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer and wall putty complete all as specified complete all as specified.

Material & labour for preparation of old plastered surface of walls and applying one coat of oil bound distemper over a coat of primer and wall putty complete all as specified complete all as specified.

M&L rendering 5mm thick in cement plaster 1:3 on ceiling,chajjas,fins etc surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by engineer in charge.

M&L for prepration of old plastered surfaces of wall and applying one coat of exterior emulsion complete all as specified and directed by engineer in charge.

M&L for prepration of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed by engineer in charge.

M&L Preparation of old plastered or painted surfaces of wall by complete removing of existing treatment (scrubbing, washing down etc) complete all as specified and directed by engineer in charge.

M&L for applying one coat of wall putty 2mm thick over & above complete treated surface as item No. 21 complete all as specified and directed.( Make : JK Wall putty.) complete all as specified and directed by engineer in charge.

M&L for applying two coats of oil bound distemper over item no 38 complete all as specified and directed by engineer in charge.

Taking down Shutters of any description exc 1.0 sqm and n.exc 2 sqm each complete all as specified and directed by engineer in charge.

Taking down Shutters of any description exc 1.0 sqm and n.exc 2 sqm each and refixing the same after required cutting , planing and painting complete all as specified and directed by engineer in charge.

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed by engineer in charge.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed by engineer in charge.

Supply and fix 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix 2nd class hard wood factory made glazed and skeleton window & ventilators shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (b) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

S& F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with or without glazing bars, dovetailed or welded complete all as specified and directed.

S& F Steel ventilator with top hung shutter with or without glazing bars including hinges, steel peg stay, complete all as specified and directed.

Supply & fix PVC solid door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.

Supply & fix factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, but fitted with stainless steel wire guaze panel stretched firmly at edges, wrapped on an additional square 8 mm M S tube complete all as per specified and as directed by the Engineer in Charge.

Supply & fix pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of zinc chromate / red oxide primer including providing PCC 1:3:6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and directed.

Supply & fix pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of zinc chromate / red oxide primer including providing PCC 1:3:6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and directed.

S&F Galvanized mild steel wire cloth, 0.56 mm noimnal dia or wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staple complete all as specified and directed by engineer in charge.

All as per Srl item No 53 above but fixed in repairs.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed by engineer in charge.

S&F 4mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed by engineer in charge.

Supply and fix 3mm thick figured glass ordinary quality pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long complete all as specified and directed by engineer in charge.

S&F in repair aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long complete all as specified and directed by engineer in charge.

Supply & fix extruded aluminium alloy handles, cast type, anodised, oval type, 150mm size, all as specified and directed.

Supply & fix in repairs extruded aluminium alloy handles, cast type, anodised, oval type, 150mm size, all as specified and directed.

Supply & fix 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply & fix in repairs 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply & fix in repairs 75 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply & fix 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply & fix in repairs 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply & fix 75 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply & fix in repairs 75 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fix mild steel bright finish or electrogalvanised 40mm width of flap continous (piano) hinges fixed with screws complete all as specified and directed.

S&F hasp and staple aluminium anodised, safety type including bolt to hinge plate and fixed with screw of 125mm size.

Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by engineer in charge.

Material & labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material & labour for preparation of new steel surfaces of any description, not exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets, any thickness any type including cover fillets, complete all as specified and directed.

S&F in repair Veneered decorative ply wood, 9 mm thick, grade I (with BWR resin), decorative face veneers on one face fixed with nails to timber frame work in wall, ceiling, flat or sloping incl dismantling wall and ceiling boards fibre, pulp insulation etc or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed by Engr-in-Charge.

M&L 6mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work one face fixed with nails to timber frame work in wall including ceiling all as specified and directed by Engr-in-Charge.

S&F for 2nd class hard wood plain fillets,sectional area exceeding 13 sqcm but not exceeding 25 sqcm, square, rectangular or triangular in section, clean sawn, secured with nails all as specified and as directed by Engr-in-Charge.

S&F for 2nd class hard wood plain fillets,sectional area not exceeding 3 sqcm, rectangular or triangular in section, clean sawn, secured with nails all as specified and as directed by Engr-in-Charge.

Material and labour for 6mm thick non asbestos fibre cement plain building boards fixed to aluminium frame as in ceiling/cladding complete all as specified and directed

Material & labour for 18/19mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F in repair Harrison rails (Curtain rod//drapery rod), 20mm dia, with and including fency type PVC bracket 2 Nos of each opening and side stopper fency type of required shape and size 2 Nos of each opening of approved colour complete all as specified and directed by Engr-in-Charge.

Dismantling stone slabs and tiles of any description or thickness in in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Material & labour for granite (of any type) work, 18 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.

Material & labour for 18-20mm thick machine cut kota stone slab 550mmx550mm/600mmx600mm laid in floors, slabs and steps etc jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbuing and polishing over and including screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed. Note - Kota stone for step shall be in single piece.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Supply & fix in repairs squatting pan WC Orissa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern) with P or S trap including provision of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc making good to match with existing surfaces complete all as specified and directed.

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern), PVC connection 450mm long and 15mm dia ,PTMT nuts of length 450mm, plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 360mm wide x 390mm high and 415 to 445mm long flexible pipe complete all as specified and directed.

Supply & fix cast iron 'P' traps dia 100mm for orrisa type WC complete all as specified and directed.

Supply and fix in repairs PVC valveless, symphonic action type, flushing cistern low level, white with inlet ball valve, float valve and handle including brackets 10 ltrs capacity fixed including flush pipe of polyethylene of low and high density of PVC 32 mm for low level cistern all as specified and as directed.

Supply and fix flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern all as specified and as directed.

S&F PVC connection with brass ferrules, 60 cm long for wash basins and flush tanks complete all as specified and directed.

S&F in repair 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by the Engr-in-Charge .

Supply & fix in repairs fancy type 15mm bore brass central hole, sink and wall CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

Supply & fix stop valve/angle valve 15mm bore, cast copper alloy, screwed down high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and direct.

Taking up or down 15mm dia bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete all as specified and directed.

Refixing 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) all as complete all as specified and directed.

Supply and fix powder coated anodised aluminium frame for ventilators with ore or more rebates including jointing cleat for fixing etc complete all as speicified and directed.

Supply and fix powder coated anodised aluminium window and ventilator shutters, side hung type with sash bars, aluminum section weighing 0.55 Kg/M including necessary jointing cleats, glazig clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminium fittings such as per stays 150mm long (01 No), hinges type B-21 100mm long (02 Nos), suitable handle (01 No) complete all as specified and directed.

Supply and fix 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane with solar control film 25 micron reflective type sticked to glass panes complete all as specified and directed.

Supply & fix in repairs stainless steel kitchen plate rack made out of 1mm thick stainless steel of size 1200 x 900 x 180mm with shelves and plate partition of pattern as approved by engineer-in-charge, fixed to wall by means of four nos rawal plugs complete all as specified and as directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fix mild steel framed work as in guard bars/grills, grating etc with end of bars shouldered and/ or riveted or forged in to spikes and similar works including one shop coat of zinc chromate primer complete conforming to Fe-290, Gde E-165 all as specified and directed.

Supply and fix mild steel rolled section as in roof trusses (framed), trussed, purlins, crane grantries, rails and fastening and heavy brackets framing (Beam, tee, channel or flat section) incluidng distance pieces cleats etc conforming to Fe-290. Gde-E-165 including all as specified and directed.

M/S GHULAM HASSAN KUCHAY