Providing Special repair works for the existing 2 Nos. of Ins., 1 No. of SI. and 10 Nos. of PC/HC Quarters at Bargur in Krishnagiri District

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.2 : Earth work excavation for foundation in all soils (Excluding refilling) a. 0 to 2 mt.

1.4: Earth work excavation for Open foundation (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.8: Earth work excavation in SDR for Open foundation (excluding refilling) a. 0 to 2 mt.

2.6: Supply and Filling of 40mm HBSJ

2.7: Supply and Filling of 20mm HBSJ

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

30 : Ellispattern

39 : M.s Grills

41 : Painting - New "iron work"

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

53.3 : C.I. Steps ( 5 kg)

61.2: Stoneware pipe dry condition a.100mm dia

62.2: Stoneware Tee a.100mm dia

Electrical arrangements 69 : 15 Amp. Power plug

74 : Charges for fixing of "Fan"

78 : Earthing Station IS3043 (Type I)

ANNEXURE-I 2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1 : P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement

b) In Ground Floor

9.5.1 : Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture a. In Ground Floor

c. In Second Floor

10.5.1 : Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 110 mm tk (B.P.) (using crushed stone sand) with admixture a. In Foundation and basement

12.1.1 : Brick partition work in C.M. 1:4 using kiln burnt country bricks of size 22x11x5cm 50 mm thick (using crushed stone sand) with admixture a. In Ground floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & basement

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

e.curved surfaces

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) with plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) with plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) with plasticizer

35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) with plasticizer

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.2: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.5 : PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light Point with ceiling rose

71.2 : Supplying and fixing of 32 AMPS Triple pole main switch.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.8 : Run of 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

85.1 : Supply of G.I pipe 40mm dia 'B' Class

214: Dismantling the existing damaged brick works of cement mortar in all floors without affecting the adjacent structures, including the cost of required tools and plants and clearing the debris from the site including cost of loading, unloading & vehicle hire charges etc., all complete in all respect and as directed by the departmental officers. a) Upto 3.00m height

218: Dismantling the existing damaged one course pressed tile roof finish in cement mortar over RCC roof slab without affecting the adjacent structures in all floors including the cost of required tools and plants and clearing the debris from the site including cost of loading, unloading & vehicle hire charges etc., all complete in all respect and as directed by the departmental officers.

224: Dismantling the existing damaged R.C.C without affecting the adjacent structures, including the cost of required tools and plants and clearing the debris away from the site including cost of loading, unloading & vehicle hire charges etc., all complete in all respect and as directed by the departmental officers.

361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand)

383 : Supply, delivery and fixing of cuddappah sink of size 600mm x 600mm x 200mm thick 32mm dia ‘B’ class G.I. waste water pipe and 32 mm dia C.P. waste coupling

ANNEXURE - II A1: Supplying and fixing of SFRC Manhole Cover slab Size 750 x 750mm including of all cost etc., all complete.

A2: Supplying and fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

A3: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A4: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A5: Supply and fixing of LED Bulk head fitting with guard, suitable for 18W LED Bulb

A6: Supplying and fixing and laying of PVC pipes and specials of approved quality and variety the rate including Earthwork excavation & refilling cost of pipes and specials, glue labour charges for laying trenches etc complete and as directed by the departmental officers. a) 50mm dia PVC pipe 6 kg/m²

b) 50mm dia PVC Tee

c) 40mm dia PVC bend

d) 50mm dia x 40mm PVC reducer

e) 50mm dia PVC elbow

A7: White washing two coats for old walls using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding, thorough scrapping and washing with soap, soda water etc., all complete.

A8: Painting the old walls with two coat of approved best oil bound distemper paint int over cement plastered wall surfaces and ceiling including cost of cement paints, putty, brushes, watering, curing, etc., all complete as directed by the departmental officers (paints and its shade shall be got approved from the Executive Engineer before using)

A9: Painting two coats for old walls with ready mixed plastic emulson paint of first class quality paint of approved colour and shade over a priming coat, including thorough scrapping, clean removal of dirt and dust etc., complete including cost of necessary brushes, labour charges, patty etc., (paints and its shade shall be got approved from the Executive Engineer before using)

A10: Painting the old wood work with two coats of approved Ist class synthetic enamel paint including clean removal of old paint using sand paper as required by the departmental officers including cost of material, labour for painting, etc all complete (paints and its shade shall be got approved from the Executive Engineer before using)

A11: Painting the old Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand, with relevant Standard specifications. (paints and its shade shall be got approved from the Executive Engineer before using)

A12: Supplying and fixing of 16 amps double pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnections and earth connections, cost of all materials etc., all complete shall be got approved from the Executive Engineer before using)

A13: Supplying and fixing 40amps Earth leakage Circuit Breaker/ Residual Current Circuit Breaker (ELCB/RCCB) 30 milli amps sensitive 6KA breaking capacity with ISI marked single phase unit (IS 12640) for incoming. 2 Nos. 6 amps single pole ‘B’ series miniature circuit breaker for outgoing lighting 1 No 16 amps single pole miniature circuit ‘C’ series breaker ISImarked (IS 8828) for power plugs outgoing in suitable breaking capacity of MCB should have 9 KA (MCB and ELCB/rccb should be of same manufacture). The ELCB and MCB will be fixed on the 18 Gauge thick MS Box of size 12”x15”x2½” all concealed in wall and covered with 3 mm thick laminated hylem sheet with brass screws and all inter connections etc., complete.

A14: Supply and fixing of 32mm dia PVC waste pipe and cp couplings with required gratings of best approved quality to the sink already fixed including the cost of all materials, labour for fixing etc., complete.

A15: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1500 litres (excluding free board) of approved brand (superior variety) with ISI Mark (marked in the tank itself) with top lid with provisions of locking including necessary specials and fittings (The tank should be got approved from the E.E. before use)

A16: Charges of cleaning the existing septic tank by compreser lorry including watering, Pumping , Converying cleaning from site to outside etc., (Compreser lorry 5000litre capacity)

A17: Supplying and fixing of Calling bell buzzer of approved quality and variety including cost of necessary connection etc., all complete.

A18: Supplying and fixing of EB metering panel size length 750mm, height 1250mm, depth 250mm with bus bar chamber made up of 18 gauge CRCA sheet fully powder coated for 1 phase 2 wire system with 25mmx3mm copper bar for phase and neutral of the panel board. Earth bus 25mmx3mm alu all around the panel. Suitable PVC colour sleeves for busbar. 32A DP MCB - 5 nos. 32A fuse carrier - 5 nos, 6 sq.mm wire for inter connection for meter to fuse and MCBs for single phase.

A19: Supplying and fixing of EB metering panel size length 1000mm, height 1250mm, depth 250mm with bus bar chamber made up of 18 gauge CRCA sheet fully powder coated for 1 phase 2 wire system with 25mmx3mm copper bar for phase and neutral of the panel board. Earth bus 25mmx3mm alu all around the panel. Suitable PVC colour sleeves for busbar. 32A DP MCB - 7 nos. 32A fuse carrier - 7 nos, 6 sq.mm wire for inter connection for meter to fuse and MCBs for single phase.

A20: Supplying and clamping of 3½ x 25 sqmm pvc armoured aluminium LT UG cable above ground level on wall and post including cost of cable necessary cable connection cost of material such as clamp saddle bolts and nuts screws plugs and redoing the dismantled masonry portions etc complete and as directed by the depatmental officers.

A21: Dismantling existing old TW Door including removal of frames, hinges and fastenings including required tools and plants and labour cost etc., all complete.

A22: Chipping of concrete and roughening the surface including required tools and plants and labour cost etc., all complete.

A23: Supplying and fixing of single phase open well submersible pumpset of 2 HP/2880 RPM 220V, 50Hz and 10-26m head 9.9-2.7LPS of approved brand quality etc., complete

A24: Supply and delivery 2 hp single phase DOL confirming to IS 13947, IEC 60947-1 and as amended thereafter with suitable KW rating for operation in AC/single phase/50Hz and 230 V including Ammeter, thermal Over load relay 16 amps 2 pole magnetic contactor and on / off push button swithches, 5 way connector, wiring with 1 sq.mm/1.5sq.mm copper PVC insulated cable, powder coated vermin proof box including the capacitor etc complete

A25: Supplying and delivery of following dia "U" PVC/HDPE pipes with ISI mark of best quality confirming to IS specification including cost of materials and conveyance etc., all complete and as directed by the departmental officers. (The quality should be got approved by the Executive engineer before use) a) 32 mm dia UPVC COLUMN pipe

A26: Supply and laying of 3 x 2.5 sq.mm flat cable in a trench to be excavated at a depth of 0.75 metre covering the cable completely with PVC rigid conduit pipe 19mm/20mm heavy duty with ISI mark and refilling the earth to make good.

A27: Supply and clamping of 3 x2.5 sq.mm flat cable on post or on wall with MS clamp including cost of MS clamps, Labour charges etc, all complete.

A28: Supply and laying of 3 x 2.5 sq.mm flat cable below Ground level without clamping including cost of Labour charges etc, all complete.

A29: Labour charges for the erection of submersible pumpset inside borewell/open well for including fixing and jointing submersible cable with proper clamps upto starter to required depth. Upto 5HP

A30: Supplying and fixing of PVC pipes with specials with ISI mark of best quality conforming to IS Specification (Below ground level) including cost of pipe and specials, earth work excavation and refilling charges etc., all complete. a) 25mm dia PVC pipe 10 kg/cm²

b) 40mm dia PVC pipe 10 kg/cm²

c) 40mm dia PVC Elbow

d) 40mm dia PVC Tee

e) 40mm dia PVC Coupling

f) 40mm dia PVC FTA

g) 40mm dia PVC MTA

A31: Supply and fixing of following dia GM/GI/PVC specials with ISI mark of best approved quality including cost and conveyence and fixing in position etc., all complete and as directed by the departmental officer. a) 40mm dia Gun metal Gate valve

b) 40mm dia GI Non Return Valve

A32: Supplying and fixing of 150mm length 12mm dia Tower bolt of approved quality and variety the rate including cost of all materials, labour for fixing in position etc complete and as directed by the departmental officers.

A33: Supplying and fixing of 250mm length 16mm dia Aldrop of approved quality and variety the rate including cost of all materials ,labour for fixing in position etc complete and as directed by the departmental officers.

A34: Removing and refixing of 32amps fuse unit the rate including cost of all materials and labour charges for fixing the fuse unit etc., all complete and as directed by the departmental officers.

A35: Supplying and fixing of Battern holder of approved quality and variety etc the rate including cost of all materials and labour charges for fixing etc., all complete and as directed by the departmental officers.

A36: Removing and refixing of ceiling rose of approved quality and variety the rate including cost of all materials and labour charges for fixing etc., all complete and as directed by the departmental officers.

A37: Supplying and fixing of 5Amps flush type switches of approved quality and variety the rate including cost of all materials and labour charges for fixing etc., all complete and as directed by the departmental officers.

A38: Supplying and fixing of 5Amps 5pin type socket of approved quality and variety the rate including cost of all materials and labour charges for fixing etc., all complete and as directed by the departmental officers.

A39: Providing leach pit including earthwork excavation for open foundation, P.C.C 1:5:10, Brick work in CM 1:5 (one of cement and five of crushed stone sand) for foundation and basement and cover slab including cost of labour and material etc, complete and as directed by the departmental officers.

K.Saravanan