SPL REPAIRS TO E/M INSTALLATION BLDG. NO. P-110 AND P-125 PATH/ HARDSTANDING AND FENCING ETC AT 111 RKT RGT UNIT AREA AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water, complete all as specified and directed.

Material and labour for rendering 10mm thick in Cement Mortar (1:6) on fair faces of Brick Walls or on Concrete Surfaces, finished fair and even, complete all as specified and as directed.

All as per Srl item No 2.00 here-in-before but 15mm thick in CM (1:4) with water proofing compound as per manufacturing instruction

Material and labour for plastering 5mm thick in cement mortar (1:3) furnished even & smooth without using extra cement as on ceiling, complete all as specified and directed.

Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering 15mm thick in cement mortar 1:3 in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm at any height complete all as specified and directed.

Material and labour for preparing newly plastered surface of wall and applying two coats of Distemper Oil emulsion over a coat of 1mm thick wall care putty on plastered surface, complete all as specified and as directed.

Complete Removal of existing treatment and preparation of old plastered surfaces of walls and applying two coat of distemper oil emulsion over a coat of 1mm thick wall care putty, complete all as specified and directed.

Material and labour for preparation of newly surfaces of wall and applying three coat of white wash on ceiling, complete all as specified and directed.

Material and labour for preparation of newly surfaces of wall and applying three coat of white wash on wall, complete all as specified and directed.

Material and labour for preparation of old plastered/treated surface of ceiling and applying one coat on white wash on ceiling, complete all as specified and directed.

Material and labour for preparation of old plastered/treated surface of walls and applying one coat on white wash on walls, complete all as specified and directed.

Material and labour for preparation of newly surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

Material and labour for complete removal of existing treatment of old plastered surface of wall and applying two coat of cement base paint, complete all as specified and directed.

Demolition of concrete of any description and in any position, complete all as specified and directed.

Material and labour PCC 25mm thick 1:2:4 type B-0, (12.5mm graded aggregate) and finishing the surface rough and even to receive top layer as under tiles, stone etc., complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc .and brushing neat cement slurry with 3 kg of cement per sqm, complete all as specified and directed.

Material and labour for machine cut kota stone slab 20 to 25 mm thick as in flooring / stair case landing, laid over & incl. 15mm thick cement screed base in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed.

All as per item Srl item No. 17.00 here-in-before but in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10mm thick screed bed in CM 1:4, complete all as specified and directed.

Material and labour for 16-18mm thick pre-polished green marble as in cooking platform over 15mm thick screed bed in CM (1:6) including grinding and mirror polished/granite polished and making hole for LPG pipe and rounding of edge of stone, complete all as specified and directed.

Material and labour glazed ceramic coloured tiles of size 450 x 300 x 6 to 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

Material and labour for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick bedding layer in cement mortar (1:6), complete all as specified and directed

Demolition of brick work as in walls/parapet walls, removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces, complete all as specified and directed

Material and labour for brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar (1:6), complete all as specified and directed

All as per Srl item No 23.00 here-in-before but except bricks complete all as specified.

Demolition of reinforcement cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level), complete all as specified and directed

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for RCC (1:1.5:3) (Nominal Mix), type A-1, using 20mm graded crushed stone aggregate as in columns, pillars etc, complete all as specified and directed

Material and labour for pre-cast RCC slab in (1:2:4) type B-0 (using 12.5mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and directed

Supply and fixing 10mm dia and over mild steel TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified

Material and labour for mild steel bars 6 to 8 mm dia deformed bars cut to length, bent to shape required including cranking, bending and binding with and including MS wire (annealed) not less than 0.9mm dia confirming to Fe-410-0, complete all as specified and directed.

Material and labour form work to chajjas and similar items including edges, complete all as specified and directed.

Use and waste of form works to sides of pillars, posts, struts, columns and stanchion, square, rectangular in rough finished surface of concrete, complete all as specified and directed

Material and labour for providing PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs/coping rounded, complete all as specified and directed

Material and labour for providing cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in covered to bottom of fencing including necessary formwork, complete all as specified and directed

Dismantling of brick tiles single layer as in roof covering complete all as specified.

Material and labour for cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in foundations, filling, mass concrete and roof padding, complete all as specified and directed

Material and labour for 12mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc all as specified and directed by Engineer-in-Charge with WPC.

Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to made surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ micro-concrete/ general purpose grout as recommended proportionally as per recommendation of manufacturer. Making of goll as at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight all as specified and directed

Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/ brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin : Harder) application with 100% water dilution and pure polyurethane application in 2 coats with a total min consumption of 1.25 Kg/Sqm all as specified and directed. Note : Application should be done with Graco sprayer by a company authorised applicator.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but n-exc 4 sqm each .

Supply and fixing framed work as in doors or gates of approved pattern & design of angle or other section conforming Fe 290 (Gde-E- 165) quality 'B' with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering of doors, etc. to be prepared for hanging or sliding with and including either hooking and hinges or steel hanging door fittings, cooler stand etc (excluding of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed.

Supply and fixing factory made flush shutters, 30mm thick, solid core construction with block board core & ply wood face panels, commercial type on both side incl 30X 6mm thick 2nd class HW lipping on edge, complete all as specified and directed.

Material and labour 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing Steel window (combination) with glazed shutter as well as gauged shutter with side hung/ top hung shutters incl box type hinges, steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including Guard bars, hold fast, tower bolt and handle Supply and fixing at iron etc and necessary cooler arrangement in window and fixed with PCC (1:2:4), complete as per Drg No CEJZ/WD-1655/22 and CEJZ/TD-1019/08 Sheet No. 1/3 to 3/3. Note:-The above rate for glazed and gauged shutter window and measured one time clear opening for payment of window

Supply and fixing Steel ventilator (combination) with glazed shutter as well as gauged shutter with side hung/ top hung shutters incl box type hinges, steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including Guard bars, hold fast, tower bolt and handle Supply and fixing at iron etc and fixed with PCC (1:2:4), complete as per Drg No CEJZ/WD-1655/22 and CEJZ/TD-1019/08 Sheet No. 1/3 to 3/3. Note:-The above rate for glazed and gauged shutter ventilator and measured one time clear opening for payment of ventilator

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified

Supply and fixing figured glass pin headed type, 3 mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane complete all as specified and directed.

Supply and fixing in repair factory made built-in steel cup board with pressed steel frame and pressed steel shutter 1.00mm thick fixed to masonry wall by hold fasts, made out of 25x3mm flat iron including MS hanging rod of 20mm dia with brackets fixed on inner side of cupboard, provn of MS peg set 3 pegs fixed on inner side of shutter and 1.00mm thick black sheet 3 Nos shelves as shown in Drg including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter and fixing in PCC (1:2:4) all as directed and shown on Drg No CEJZ / TD-1104/08 Sheet 1/2 to 2/2, complete all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforced with MS squre tube supplied and fixing as per specification and drawing .

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing of Prayag syment butt hinges 100mm long, complete all as specified and directed.

Supply and fixing Prayag syment tower bolt 150mm long, complete all as specified and directed.

Supply and fixing Syment bow handle 125mm long, complete all as specified and directed.

Supply and fixing 300mm long mild steel sliding door bolts stove enameled black, with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified

Supply and fixing 125 mm size butt hinges medium weight cold rolled mild steel, complete all as specified and directed.

Supply and fixing 200 mm long mild steel tower bolt stove enameled black with bright bolt, complete all as specified and directed.

Supply and fixing 125 mm mild steel pressed handles oval type, stove enameled black, complete all as specified and directed

Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 140mm complete all as specified and directed.

Supply and fixing in repairs 20mm dia curtain rails mild steel chromium plated with fixing brackets fixed, complete all as specified and directed.

Material and labour for preparation of new wood surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Material and labour for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome, complete all as specified and directed.

Material and labour for preparing new surfaces of steel of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over one coat of red oxide primer

Material and labour for preparation new surfaces of any description over 10cm girth or width and applying two coats of synthetic enamel paint of any colour over a coat of priming paint to achieve smooth surface, complete all as specified and as directed

Taking down old steel tubing & connection including cleaning for refixing for 15mm bore pipe complete all as specified

All as per Srl Item No. 68.00 here-in-before but 20 mm bore

Supply and fixing 15mm bore galvanized iron tube s medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified

All as per Srl Item No. 70.00 here-in-before but for 20mm bore tube

Material and labour re-fixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

All as per Srl Item No. 72.00 here-in-before but for 20mm bore tube

Supply and fixing in repair Bib Cock long nose (Foam Flow) with Flange 9806, suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing 15mm bore Pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for pipe and fixed complete all as specified and directed

Supply and fix in repair Stop Valve 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

Supply and fixing in repairs stop valves 15mm, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

Supply and fixing in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Supply and fixing in repair Orrisa pattern WC in ground or first floor vitreous china white of size 580mmx440mm fixed in repair incl provision of lime concrete bedding and P trap and breaking up of existing damaged WC seat and connecting flush pipe etc complete all as specified and directed.

Supply and fixing in repair one piece wash basin with pedestal of size 565x430mmx845mm of any colour, complete all as specified and directed.

Supply and fixing in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified and directed.

Supply and fixing in repair flexible PVC waste pipe of approved quality 25 mm bore, 75 cm long with one end socketed fixed to waste coupling, complete all as specified and directed

Supply and fixing in repair flushing cistern duo flush of 10 ltr capacity white colour complete all as specified and as directed

Supply and fixing in repair CP grating 125mm dia fixed in repair all as specified and directed.

Supply and fixing in repair, soap dish holder and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed.

Supply and fixing in repair, Sheet Glass Shelf 500x125mm (with brass brackets) and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed

Supply and fixing in repair, corner shelf 300mm (with brass brackets) and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed.

Material and labour for chromium plated peg set of 5 (PTMT), fixed with screws and plugging to rear side of door shutter in bath, complete all as specified and directed.

Supply and fixing in repair brass towel rail and fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed.

Supply and fixing 500 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description complete all as specified.

Supply and fixing 1000 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description complete all as specified.

Disconnecting of water tanks of 500 ltrs capacity, setting aside for repairs cleaning and removing all scale and dirt etc from tank and mouths of circular pipes & re-fixing in position complete all as specified and directed

Disconnecting of water tanks of 1000 ltrs capacity, setting aside for repairs cleaning and removing all scale and dirt etc from tank and mouths of circular pipes & re-fixing in position complete all as specified and directed

Supply and fixing 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified

Supply and fixing in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified

Supply and fixing in repairs chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed

Taking down eaves gutters and rainwater pipes/sewage pipe (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store complete all as specified and directed

Supply and fixing 110 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and directed.

Supply and fixing 75 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and directed

Supply and fixing 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fixing 75 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fixing 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal with rubber rings joints fixed to walls complete all as specified and as directed

Supply and fixing 75mm dia PVC (SWR) junction single, (Single T) equal or unequal with rubber rings joints fixed to walls complete all as specified and as directed

Supply and fixing 75mm dia PVC (SWR) vent cowl complete all as specified and as directed.

Material and labour for 125/110mm PVC (SWR) PVC (SWR) floor/nahani trap, plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 Type C-1 using 20mm graded aggregate as in plinth protection/path complete all as specified and as directed.

Material and labour for PCC 1:2:4, type B-0, using 12.50mm crushed aggregate as in surface channels and drains, complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 (40mm graded stone aggregate) filling in post holes, foundation, surface channels and drains and other similar work complete all as specified.

Cutting chases, pinning in brick wall/slab etc and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

Dismantling timber scantling 40 sq CM and over in section in any position (un framed work), complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings incl ridges, complete all as specified and directed

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out in any type of soil returning, filling in and ramming earth in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 using 40mm graded aggregate as in Foundation filling and mass concrete, sub base to floors complete all as specified and directed.

Material and labour for M.S work in angle iron/flats/Pipes/plates in posts, rafters, purlins, etc connected to common rafters of any size confirming to Fe 410-W(grade-E-250) quality A including necessary drilling holes, cutting tops to shape welding etc and fixed with nuts & bolts etc complete all as specified and directed.

Material and labour for Mild steel angle iron fencing posts and struts in fencing including necessary cutting, drilling, welding etc and bending to swan neck shape as required and drilling holes notching for wire etc conforming to Fe-410-0 or 310-0 complete all as specified and directed

Material and labour for Mild Steel work in flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Supply and fixing Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed

Supply and fixing Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

Material and labour for 11 to 16 mm dia mild steel screw bolts (Machine made) with hexagonal or square head at one end and screwed the other or screwed both ends each screwed and to be bolted with washers and one hexagonal or square nut exc 50mm but n. exc 100mm long and dia of shank 10 to 16 mm complete all as specified and directed

Supply and fixing Mild steel screw bolts (machine made) 11 to 15mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long, complete all as specified and directed

Supply and fixing in repair steel rolling shutters 1mm thick lath, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, complete all as specified and directed

Material and labour for 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over and including 25mm thick sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in bed blocks for grouting hold fasts, coping or similar work including necessary form work complete all as specified and directed

Material and labour for providing precast cement concrete (1:2:4) type B-1 (20mm graded stone aggregate) set in CM (1:6) as in kerb stones , steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match, complete all as specified and as directed

Dismantling posts or struts (Steel or RCC) any section embedded in natural ground, including taking out embedded portion and making good disturbed ground and preparing post holes for providing new posts in any type of soil complete all as specified and directed

Dismantling posts or struts (Steel or RCC) any section embedded in concrete, including taking out embedded portion and making good disturbed ground and preparing post holes for providing new posts in any type of soil complete all as specified and directed

Taking down carefully old galvanised stranded steel barbed wire from old RCC posts and removing from site all as directed

Dismantling fencing wire mesh, any type, complete all as specified and directed

Supply and fixing galvanised 2 strand steel barbed wire 2.24mm dia with 2mm barbs at 75mm spacing and straining and fixing to posts of any type including securing or tying at crossing with and provision of GI wire staples or steel pins etc complete all as specified and directed.

Supply and fixing MS chain link fencing not less than 4mm thick galvanised steel wire and 75mm x 75mm size mesh fixed to steel fencing post by nut & bolts etc including provision of binding wire complete all as specified and directed

Material and labour for concertina coil of 600mm dia on vertical double horn fencing complete all as specified and directed

Material and labour for 16 to 20mm thick granite work (of any type), machine cut (table rubbed and polished) as in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, hand wash place and like including necessary cutting and grooving to walls and making good including 15mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite including demolition of existing broken stones/cement mortar etc and removing the debris out of defence land complete all as specified and directed

Supply and fixing 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lap, fixed with bolts coach screws and washers with steel framed gate, walls and fencing etc. complete all as specified and directed

Material and labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed

All as srl item No. 138.00 here-in-before but as in skirting, dado & vertical surface over and incl 10mm thick screed in cement mortar 1:4 on walls, finished even and rough to receive the top layer as specified

Material and labour for preparation of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces) ,washing rubbing down and stopping of distempered and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces complete all as specified and directed

Material and labour for complete removal of existing treatment of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces), washing rubbing down and stopping of distempered and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces complete all as specified and directed

Design, supply, install, testing and commissioning LT distribution panel, cubical type, outdoor type, dust and vermin proof, factory fabricated made out of 3mm thick CRCA sheet outer & 2mm thick CRCA sheet inner of size 1.5m x 1.1m x 0.45m (min) to accommodate all accessories/ fittings, compartmentalized in construction to accommodate the incoming & outgoing switchgear, accessories and aluminium bus bars as per 1 Amp/ Sqmm rating. The busbars of suitable size duly insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/ epoxy insulator. The extension links shall be supported on DMC/ epoxy insulators having provision for termination of incoming and outgoing cables. All extension links/ interconnection shall have colour coded sleeves. The cubicle shall have frame work & 45cm long four legs of size 50 x 50 x 6mm MS angle iron duly powder coated, grouted in PCC (1:3:6) as directed by Engineer-in-Charge. A detachable gland plate of thickness not less than 3mm thick should be used at the bottom for entry of cables of adequate size with compression glands. The panel shall be powder coated finish with RAL 7032 SIEMENS GRAY STRUCTURE after seven tank phosphating treatment, front & back opening type, and have 2 Nos danger notice plate with letter, figures and conventional skull bones in signal red colour and FRONT & REAR side mentioning on LT panel doors with voltage and danger indicated in Hindi and English, with double door shutter and shall have louvers and air vent gasket for natural flow of air, neoprene adhesive type gasket shall be used to make panel vermin proof and comprising of following :-

Supply, installation, testing & commissioning of non contact type ultrasonic level sensor for level monitoring & level based operation of pump for sewage sump with suitable power supply and cabling as per following specs:- (a) Range 0-10m (b) Output 4-20 mA (c) Accuracy ±0.25% of full scale or better (d) Enclosure IP-65 or better (e) Necessary fixing arrangement (f) Material : pressure die cast aluminium housing Make : SBEM/ Electronet/ Pune Techtrol/ FORBES MARSHAL

Supply, installation, testing & commissioning of non contact type ultrasonic level sensor for level monitoring & level based operation of pump for sewage sump with suitable power supply and cabling as per following specs:- (a) Range 0-9m (b) Output 4-20 mA (c) Accuracy ±0.25% of full scale or better (d) Enclosure IP-65 or better (e) Necessary fixing arrangement (f) Material : pressure die cast aluminium housing Make : SBEM/ Electronet/ Pune Techtrol/ FORBES MARSHAL Note for Srl item No. 139.00 to 141.00 : The quoted rate includes commissioning at site, necessary connection & synchronization of level sensor with starter panel for functioning of motor w.r.t. level in sump complete.

Earthing complete in replacement with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised iron 32x6mm strip as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade 40mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved all as specified and directed and testing on completion. Note : PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner

Supply and fixing in repair CI sluice valves with, flanged ends drilled of class 1.6 PN of size 300mm dia with gun metal spindle, brass ring, CI wheel including jointing material, nuts, bolts and gasket all as directed by Engineer-in-Charge .

Supply and fixing in repair CI sluice valves with, flanged ends drilled of class 1.6 PN of size 150mm dia with gun metal spindle, brass ring, CI wheel including jointing material, nuts, bolts and gasket all as directed by Engineer-in-Charge .

Supply and fixing in repair ductile iron specials such as of Bends, Tapers, Tee pieces, Tail piece (single & double branch) any type and angle/radius and straight connecting pieces and tail pieces with S/S or flanged ends, Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth including cutting, welding, painting etc complete upto 300mm dia complete all specified and directed by Engineer-in-Charge.

Material and labour for cast iron pipes 150mm dia with flanged ends/ vertically cast, class A, in any length, laid in trenches complete all as specified and directed

Material and labour for re-painting to existing painted steel surfaces, pipes complete on both sides of sump well/ pump house girder or any other iron structure after preparation of surfaces with two coats of synthetic enamelled paint of colour as approved complete all as specified and directed.

Material and labour for removing of pump/ motor from existing UG sewage sump to outside with the help of tripod/ chain pully block or any other equipment for fixing of new cable complete lowering the pump/ motor in the sump making jointing, electric connection and refitted with delivery pipe, connecting, commissioning and testing on full load complete all as specified and directed

Supply and fixing in repair glow sign board of size 90cm x 75cm x 25cm made of aluminium sheet 2mm thick with frame of stainless steel with UV printing on star flex in blue and white colour with 02 Nos of 09 Watt LED fitting 2 feet upto 100 words supporting with 50mm GI pipe light grade 2.5m height alongwith give support of PCC (1:2:4) to GI pipe complete all as specified and directed.

Supply and fixing in repair of flex board (informatory/ cautionary) of size 3’ x 2’ having minimum 150 words written in three language fixed on MS square hollow pipe frame of size 30 x 30mm x 2mm duly painted with two coats of synthetic enamel paint over one coat of red oxide fixed with necessary arrangement complete all as specified and directed

Supply and fixing in repair soft wood board with superior quality cloth of size 4” x 3” suitable for fixing in wall complete all as specified and directed

Taking out old unserviceable LT cables from excavated trenches, ducts, wall, pole etc including disconnecting, removing cable covers, sand, cable joints, pipes, clamps etc, taking out old serviceable cables, cable covers, etc complete all as specified and directed

Supply, laying, and testing of LT cable XLPE insulated sheathed, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 95 sqmm 3.5 core laid in trenches/on floor/ under roads / through pipes complete all as specified and directed

Supply and fixing PVC insulated unarmoured heavy duty electric copper cable with multistranded copper conductor 1100 volts grade, cross-sectional area 70sqmm 4 core suitable for non cloging submersible pump all as specified and directed.

Excavation in trenches in hard/ dense soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of underground cable, pol foundation and stays etc and getting out complete all as specified.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick each layer complete all as specified and directed.

Removing excavated soil to a distance n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length complete all as specified and directed

Material and labour for sand cushioning with 8cm thick layer of sand before laying of cable and 15cm thick after laying of cable in trenches and punned down complete all as specified and directed. Note : Punned down thickness of 18cm will be measured.

Supply and fixing electromagnetic sewage flow meter of line size 300mm rating IP-67, 230V, AC, accuracy ±0.5% (temp 100C to 1200C) complete including opening of MS pipe of size 300mm and fixing of low meter with cutting, welding, chasses in existing tail piece complete all as specified and directed

Material and labour for MS column pipe of 150mm dia ‘C’ class in 3m length each having flange at both ends duly having drilled holes complete with jointing materials i.e. rubber flange, nut and bolts all as specified and directed.

Supply and fixing in repair 100 watt energy saving, environment friendly IP66 LED flood light luminaire with high efficacy 110 lumnes/ watt complete with necessary connections all as specified and directed by Engineer-in-Charge.

BHARAT ENTERPRISES

H K CONSTRUCTIONS

KABEER CONSTRUCTIONS