Restoration of road damaged for laying of Fiber Cable on Junction Janedghat to Jeet Nagar road(SH C/O Edge Wall and P/F Crash barrier at various RDs

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form work including Carriage of materials with in all leads and lifts and as per direction by the Engineer-In-Charge(i) Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including carriage of materials in all leads and lifts .

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: including Carriage of materials with in all leads and lifts and as per direction by the Engineer-In-Charg (1) 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Providing and Fixing single sided single "W" Metal beam crash barrier comprishing of cold formed W profiled section having thickness of 3 mm (uncoated thickness ) with frame width of 311 mm depth 83 mm and length 4318 mm ( made of ISI marked HR coil conforming to IS : 5986/2011 ) , to be fixed on cold formed channel section post of size 150x75x5 mm ( Made from ISI marked Hr Coils conforming to IS 5986/2011 ) spaced 1.50 metre centre to centre of the post which will be of total height of 1.80 metre with its height of 1.1 metre below ground level and 0.70 metre above ground level. Metal beam rail to be fixed on the vertical post with spacer channel of cold formed channel section size 150x75x5 mm and 330 mm long (made from ISI Marked HR coils conforming to IS : 5986/2011 ) , All the above components shall - conform to clause 810 of MORTH &H specifications including all fittings required for erection on road side W-Beams, Posts , Spacers shall be hot dip galvanised with Zinc coating of 550 gm/Sqm. All bolts , nuts and washers shall be hot dip galvanised to IS :1367 pt-XIII/1983 ( Reaffirmed 2011 ) for bolts and IS 14394/1996 ( reaffirmed 2011 ) for nuts including carriage of materials in all leads and lifts as per the direction of Engineer-in- charge.

Sanjeev thakur

Sanjeev Kumar