Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC VILL TUTNYU PO PS LAZU KHONSA DISTRICT TIRAP PIN 792130 ARUNACHAL PRADESH | KHONSA | TIRAP | ARUNACHAL PRADESH | 792130 | L1 | Accepted-AOC DUE TO L1 RATE | |
| 2 | L2₹19.7 L+₹77,118.70 (4.07%)Rejected-Finance KALIBARI ROAD TINSUKIA TINSUKIA ASSAM 786171 | TINSUKIA | ASSAM | 786171 | L2 | Rejected-Finance DUE TO REAT HIGH | |
| 3 | L3₹20.3 L+₹1.4 L (7.28%)Rejected-Finance | L3 | Rejected-Finance DUE TO REAT HIGH | |
| 4 | L4₹21.7 L+₹2.7 L (14.5%)Rejected-Finance | L4 | Rejected-Finance DUE TO REAT HIGH |
Tender Value
₹18.8 L
EMD Value
₹37,600
Closing Date
16 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lekhapani
GE Lekhapani, Tinsukia, Assam
PROVN OF TOILET BLOCK NEAR UNIT LINES WITH ALLIED WORKS,ADDN/ALTN AND REPLACEMENT OF DAMAGED ROOF SHEET OF BLDG NO.T-25 AT LEKHAPANI MIL STN
2022_MES_546060_4
8688/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE Lekhapani
Class E Category a(I)
4 documents required · 4 mandatory
₹500
GE Lekhapani
₹37,600
Yes
13 Jan 2023
24 Nov 2022
19 Dec 2022
24 Nov 2022
16 Dec 2022
2 Dec 2022
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundations,laying cables,pipelines,manholes,etc and getting out in soft/ loose soil complete all as specified and directed.
Excavating over areas n exc 1.5m deep and getting out in soft/loose soil, complete all as specified and directed.
All as per item No.3 above but exc 1.5m deep but n. exc 3 m deep and in soft/loose soil, complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm of soft loose soil complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) in foundations, filling, mass concrete etc complete all as specified and directed.
M&L PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) in surface channels and drains,etc complete all as specified and directed.
M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms,moulds,mitred,stopped ends,etc complete all as specified and directed.
M&L Providing RCC (1:1.5:3) (Nominal mix) type A1 (using 20mm graded stone aggregate) as in in beams, cantilevers beressummers lintels over 1.5m length and the like etc complete all as specified and directed
M&L Providing RCC (1:1.5:3) (Nominal mix) type A1 (using 20mm graded stone aggregate) as in slabs of septic tank, soak well etc supported on walls beams & columns in floors, roofs, landings, balconies, canopies, deck slabs,shelves and the like etc complete all as specified and directed
M&L Providing RCC (1:1.5:3) (Nominal mix) type A1 (using 20mm graded stone aggregate) as in retaining walls and the like etc complete all as specified and directed
M&L Providing RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in as cover slab for manholes, etc and set in CM (1:4) with plain fair faces incl chamfered, weathering, throating etc incl necessary form work complete all as specified and directed
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed.
Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for rough finished flat surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to walls with rough finished flat concrete surfaces complete all as specified and as directed.
M&L Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.
M&L Brickwork with sub class ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM (1:4) complete all as specified and directed.
M&L Loose filling with broken brick aggregates of gauge 40 to 80mm in soakage pit, soak well etc complete all as specified and directed
Dismantling timber scantlings in unframed timber work 40 sq.cm and over in section, in any position complete all as specified and as directed.
M&L for 2nd class hard wood scantling, clean swan, timber fixed as in unframed work complete all as specified and as directed.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each and making good to disturbed surfaces complete all as specified and as directed by the Engineer-in-Charge.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4.0 sqm each and making good to disturbed surfaces complete all as specified and directed by the Engineer-in-Charge.
S&F Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and as directed.
S&F 3 mm thick,figured glass , pin headed type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete fixed to frames all as specified and as directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed.
S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & both face is covered with decorative face veneer with lipping / frame to match & fixed to chowkats complete all as specified & directed.
S&F 35 mm thick, hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified & directed.
S & F Aluminum powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Soction of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and directed.
S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.
S&F 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.
S&F 100mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed to PVC door complete all as specified & as directed.
S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed.
S&F 300 mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & as directed.
S&F Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with steel wire staples complete all as specified & directed.
S&F Galvanised steel wire netting 0.91 mm dia and 12 mm size of mesh for lathing, fixed with tinned of wire staples to wooden frame in all including all laps, cutting and waste complete all as specified and directed.
M&L PCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in bed plates and similar articles including necessary form work complete all as specified and directed.
M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed.
All as per Item No.41 above but TMT bars 8 mm complete all as specified and directed.
All as per Item No.41 above, but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders,complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed.
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Fixing only roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (GdeE- 250) quality A,complete all as specified and as directed.
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.
S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n exc 10 cm long and diameter of neck 5 to 10 mm complete all as specified and directed
S&F Framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified and as directed.
M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and as directed.
M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.
M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm as in vertical surfaces such as skirting dado,etc. and set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM (1:4) complete all as specified and directed.
M&L Glazed coloured ceramic tiles of size 300x450x6 to 7mm thick as in vertical surface , set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over and including 10 mm thick rendering as in backing wall plaster in CM (1:4) complete all as specified and directed.
M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile not exceeding 0.11 Sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed.
M & L Hardcore of gauge nexc 63mm deposited spread and levelled in layers nexc 15cm thick watered and rammed to a true surface with broken stone or boulders complete all as specified and as directed.
Demolition of unreinforced cement Concrete floor Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris the premises complete all as specified and directed.
M&L 40 mm thick PCC (1:2:4) type B1 ( using 20mm graded stone aggregate) as in floors, finished even and smooth, using extra cement complete all as specified and directed.
M&L for Glass dividing strips, 3 mm thick 38mm wide and inserted in position, conform to design complete all as specified and directed
M&L 75 mm thick PCC ( 1:4:8 ), type D-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.
M&L 50 mm thick PCC ( 1:3:6 ), type C-1 (using 20 mm graded stone aggregate), as in plinth protection complete all as specified and as directed.
M & L 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor complete all as specified and as directed.
M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in urinal partitions, skirting, dado wall linning and like in over 12mm thick cement mortar(1:4) incl pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and as directed.
Rounding to edges of stone slabs one edge such as in steps, platform and similar situations
M & L 50 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) finished even and smooth without using extra cement and spike rolling to surfaces or making imprssion of expanded metal whilest the concrete is greencomplete all as specified and as directed.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed.
M&L Rendering 10.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surfaces in two layers 5mm thick finishing layer over 10mm thick backing layer finished fair and even with mixing water proofing compound to top layer as per manufacturers instruction and as directed (WPC will be measured separetely).
Supply only Integral water proofing compound of approval brand complete all as specified and directed.
M&L Preparation of new plastered surfaces of wall and preparing surfaces as directed and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.
M&L Preparing new wood and wood basd surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L Rendering 10.mm thick plaster in CM (1:4) on fair faces of concrete surfaces as in ceiling including finishing top even and smooth without using extra cement complete all as specified and directed.
M&L Preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
M&L Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L Preparation of new or previously un treated steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L Preparation of old painted surfaces of steel of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F GI pipes,15mm dia bore (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&FGI pipes, 20mm dia bore (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified anddirected.
M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.
S&F Fancy type long body 15mm dia Bib taps cast copper alloy, chromium plated screwed down to iron pipe or for brass ferrule & fixed complete all as specified and directed.
S&F Fancy type swan long neck 15mm dia pillar taps suitable, cast copper alloy with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe & fixed complete all as specified and directed.
S&F Vitreous china wash down water closet, "Pedestal pattern with fixing bolt, plastic water closet seat cover, white, closed pattern with flat bottom and cover with aluminised hinging device, complete all as specified and directed.
S&F Vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of P or S trap embedded in cement concrete bedding complete all as specified and directed.
S&F Wash basins white, vitreous China, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified and directed.
S & F Vitreous china urinal, half stall type, flat back, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, grating and union for discharge/waste pipe, CP screws etc complete all as specified and as directed.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 gms) complete all as specified and as directed.
S&F Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and as directed.
S & F Health flucet 15mm dia with 1.5mtr CP flexiable pipe complete all as specified and as directed.
S&F PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets complete all as specified and as directed.
S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F 15 mm dia stop valves, cast copper alloy chromium plated , concealed type with long shank and cap screwed down high pressure with crutch or butterfly handle for iron pipe or for union, complete all as specified and as directed.
S&F 15mm swivel shower with arm 195mm long of PTMT of any colour for fixing with 15mm pipe (Min weight 40 gms) complete all as specified and as directed.
S&F Rotational moulded polyethylene water storage tanks of 1000 ltr capacity,(cylindrical vertical with closed top) double layered,hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.
S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified anddirected.
S&F Gun metal globe or gate valves of size 20mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches or in floor complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches or in floor complete all as specified and as directed.
S & F Salt glazed stoneware gully traps square or round mouthed type P of size 150 x150mm complete all as specified and directed.
S & F 110mm PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed.
S&F PVC (SWR) bends 110mm dia any radius all as specified and directed.
S&F PVC (SWR) bends 75mm dia any radius all as specified and directed.
S & F 110mm PVC (SWR) vent cowl complete all as specified and directed.
S&F PVC (SWR) vent cowl 75mm bore fixed with pipe complete all as specified and as directed.
M&L PCC (1:3:6 ), type C-2 (using 40 mm graded stone aggregate), as in bed to drain pipes of 110 mm bore incl packing under and haunching against the sides of pipes after thy are laid and testing complete all as specified and directed.
M & L for concealed point wiring complete with two run of 1.5 sq mm FRLSH ,PVC insulated multi stranded copper conductor single core cable 1100 volts grade,drawn into non metalic PVC rigid conduit medium grade of size not less than 20mm dia and conduit accessories fixed in wall, floor and on roof etc. and including provision of PVC insulated 1.5 sq mm FRLSH, copper conductor for earth continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet or modular metal flush boxes concealed in wall and laminated sheet cover of 3 mm thick includig cutting grooves for housing the switches socket,outlet etc.,for one light point controled by one one way 6 Amp switch complete all as specified and directed by Engineer-in-Charge. Note :- Cost of PVC conduit, cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint of surface are deemed to be included in the quoted rate.
S&F Switch piano flush type, 6 amps, 230V AC,single pole, one way all as specified and directed.
S&F Ceiling rose surface type bakelite 65x50mm three terminal all as specified and directed.
S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : LED Batten - Crompton Cat part No IG16LT8-16 or equivalent in philips/Wipro/Surya/Havells, Tube rod - Crompton Cat part No LTT8-20 or equivalent in philips/wipro/Surya/Havells.
S&F LED bldg security light fitting 25W watt with 230 Volts with IP 66 protection, High Impact resistance complete with mounting bracket,02 x MS Flat size 40x3 mm clamp set, nut/bolt/washers etc all accessories internally pre-wired and fixed to walls complete all as specified and directed.
Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable all as specified and directed.Note: Punned thickness shall be measured for payment purpose.
Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed.
Supply,laying and testing of XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with glanded aluminium conductor of cross sectional area 16 sqmm 2 core laying or passing through pipe/wall/floor/trenches complete all as specified and directed.
Supply and laying GI pipe, 40 mm bore, “light Grade” in trenches/under floors or roads or along the pole incl clamp with suitable nuts and bolts for protection of cables complete all as specified and directed..
S&F Pressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts including grouting in wall and connecting complete for 4 way complete all as specified and directed.
S&F MCB SPN 32 Amps, 230 volts AC and connecting using suitable size of wire all as specified and directed.
S&F MCB SP 6 to 32 Amps, 230 volts AC and connecting using suitable size of wire all as specified and directed.
S&F GI water tubing, medium grade, 20 mm dia, incl fittings/accessories like sockets, bend, elbow, union etc laying in trenches all as specified and directed.
M&L Cutting existing steel tubing for alterations or additions (Each cut measured) of 20 mm bore all as specified and directed.
M&L Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of 20 mm bore all as specified and directed.
M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways and testing on completion,etc complete all as specified and directed by Engineer-in-Charge.
M/s NARAYAN MUKHERJEE & CO
M/s AGAM CONSTRUCTION
M/S JUBARAJ GOGOI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .