REPAIR TO CERTAIN ROAD ALONGWITH ROAD SAFETY FIXTURES UNDER AGE B/R-II OF GE (I) KANPUR

Amount

M&L for Preparing of existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt/dust etc and applying evenly a priming/tack coat with bituminous tack coat with catonic bitumen emulsion pressure sprayer @ 5 kg/10 Sqm complete all as specified and directed.

M&L Bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient by mechanical paver complete all as specified and directed.

Supply and fixing dual directional reflective cat eye of aluminium casted stud 100 x 100 mm having plastic ABS strip containing 31 mini retro reflective glass beads of colour white/red/yellow one side provided with zinc plated nail of 12 mm dia and length 120 mm for fixing to road by hammering, complete all as specified and as directed. Cat part No-GPL 01-02 CAT EYE AL(31B) of Greenlite/ Cat part No OS-785 make Oscaror equivalent in Dark eye/Road Star/Siner/3M infrastructure.

M&L 2.0 mm thick marking lines, dashes arrows, strips (retro-reflective) of specified shade/colour n. exc. 10 cm width/girth on road surface using hot applied thermo plastic road marking paint mixed with radium glass beads @250 gms/sqm with automatic machine to provide reflectivity and night vision (approximate temperature being 200 degree Celsius at the time of laying) including cleaning the surface by removing all dirt, dust & all other foreign matters, demarcation at site and traffic control, complete all as specified and directed.

Supply and fixing in repair of HDPE high density polythelene speed bumps of size 450 mm x 335 mm, 75 mm height of pre coloured material UV stabilized (non fadable in sunlight), studded with two dust free and waterproof highly reflective reflectors (should be molded in PMMA material are welded with PE base plate through ultrasonic welding process and then fixed on the speed bump fixed with four nails and epoxy including filling of hollow portion of bumps with bitumen/cement concrete each as per manufacturer instructions complete all as specified and directed.

Supply and fix in repair ABS round body delinator fitted with 2 Nos 100 mm highly reflective reflectors made out of PMMA and mounted on MS pipe of 50 duly powder coated anti rust & anti theft steel net of any colour combination weight not less than 750 gms (excluding pipe). The body of Guide Post to be moulded in ABS plastic and it is fixed on powder coated steel pipe of 1010mm height weight not less than 1700 gms complete all as specified and directed.

Supply and fix in repair Direction and Place Identification signs made of Class A High Intensity Micro Primatic Grade Sheeting of Type I with size more than 0.9 sqm size board, (Providing and erecting direction and place identification sign as per IRC : 67-2012 made of retro-reflective type sheeting and vide clause 801.3 of MORTH, fixed over aluminum sheeting, 2 mm thick with area exceeding 0.9 sqm and fixed on a stainless steel frame of size 32 mm dia supported on 2 Nos stainless steel posts of size 50 mm dia firmly fixed to the ground with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level complete all as specified and directed.

Demoltion of Concrete (unreinforced) of any description and in any position complete all as specified and directed.

M&L for PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) as in foundation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement over sand cushioning complete all as specified and directed. (Sand to be measured separately).

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm grade stone aggregate) as in kerbs of mud, stops, rounded or chamfered on edges for proper matching with existing surface, complete all as specified and directed.

M&L premix bituminous macadam laid roled and compacted to required gradient and camber (consolidated thickness 75 mm or less), binder content 4% of binder content by weight of total mix using bitumen VG-30 laid, rolled and compacted to required gradient and camber with 8 to 10 tonne capacity power roller by using mechanical paver complete all as specified and directed.

Bindra Builders (BID ID -3282139)