PROVN OF LADIES TOILET IN 34 SSB GTO GROUND AT SCE, TILING AT BLDG. NO. P-47 (CHANAKYA HALL) SCE, SPL REPAIR OF BLDG. NO. T-73 AT SCE AND OFFICERS / STAFF TOILET OF CHQ OFFICE COMPLEX BLDG. NO. P-364 OF SCE UNDER GE (WEST) ALLAHABAD

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide & not exceeding 1.5 metre depth for foundation etc and getting out, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25 cm in soft/loose soil complete all as specified and directed.

Filling under floor using excavated soil, spreading and levelling in layers n exc. 25 cm thick well ramming in layers and watering etc complete all as specified and directed.

M/L PCC type D-2 1:4:8 (40 mm graded aggregate) as in foundation filling, sub base and mass concrete complete all as specified and directed.

M&L RCC M-25 design mix as in beams, cantilevers, lintels over 1.5m span etc complete all as specified and directed.

M&L RCC M-25 design mix as in foundation, footing, base of col, beam, lintel ,plinth beam, bases for column etc complete all as specified and directed.

M&L RCC M-25 design mix for columns and etc complete all as specified and directed.

M&L RCC M-25 design mix for slab and chajjas etc complete all as specified and directed.

M&L for use and waste form work to sides of concrete foundation, footing, bases of columns and similar works in vertical or to batter of fair finished surfaces complete all as specified and directed.

M&L for use and waste form work to sides of concrete columns and similar works in vertical or to batter of fair finished surfaces complete all as specified and directed.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings, Chhajja, and similar work n. exc. 200 mm thick, rough finished surface of complete all as specified and directed.

M&L for use and waste form work to sides of concrete beam, side and soffits of plinth beam and similar works or to batter of fair finished surfaces complete all as specified and directed.

M&L for brick work with with fly ash bricks bricks old size straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for foundations, columns, beams and slabs hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F mild steel TMT bar 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for foundations, columns, beams and slabs hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F mild steel TMT bar 8 mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for stirrups hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces and of brick work or concrete surface finishing the surface even and smooth without extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately as supply only.

M&L for rendering 5mm thick in CM 1:4 on ceiling surface and finishing the surface even and smooth without extra cement complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed. Make:- Dr Fixit Pidiproof LW+ or equivalent in specified make.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles 450x300x7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for screed bed or bedding layer in CM 1:6, 15mm thick complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of wall or concrete surfaces in CM 1:4 finished rough for wall tiling complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for hard core of broken stone or boulders of gauge n.exc 63 mm deposited spread and leveled in layers n.exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

S&F Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part-II (2020) complete all as specified and directed.

S&F solid panel PVC door shutter factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC Sheet on back face, with particle board core supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm long type stainless steel, Butt hinges, with galvanized mild steel hinge pin, anodised complete all as specified and directed.

S&F aluminum handle fabricated type anodized size 150 mm long, complete all as specified and directed.

S&F aluminimum anolised barrel tower bolt of extruded section 200mm long, complete all as specified and directed.

S&F GI tubing, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing, 20mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethlene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F ball valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe 20mm bore or brass ferrule complete all as specified and directed.

S&F gun-metal 20mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F bib tap 15mm bore, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F stop valve 15mm bore, chromium plated fancy type, with long shank and cup screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F low level flushing cistern PVC 10 ltrs capacity with all internal fittings, bracket and 32mm bore PVC flush pipe, complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F vitreous china wash basin white flat back type of size 550x400mm including brackets complete all as specified and directed.

S&F CP waste coupling 32mm dia complete all as specified and directed.

S&F 15mm bore dia of pipe pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F vitreous china wash down water closet pan (padestal pattern) white excluding flushing cistern & flush pipe including plastic water closet seat cover closed pattern with flat bottom and cover and MS chromium plated aluminised hinging device including connection to trap drain pipe or outgoing pipes and to flushing pipe anti syphonage pipe etc. complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty / beads in square, area n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F PVC (SWR) 75mm pipes single socketed in any length with rubber ring joints laid in trench or floor complete all as specified and directed.

S&F PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) 110mm bend complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.

S&F PVC(SWR) vent cowl 110mm dia bore complete all as specified and directed.

M&L for concrete bed to drain pipes of 150mm internal dia pipe in PCC 1:3:6 type C-2 using 40 mm graded stone aggregate including packing under ,and haunching against sides of pipes after they are laid and tested complete all as specified and directed.

M&L for 150mm internal dia reinforced concrete pipes, class NP-2 pipes laid in trenches and jointed complete all as specified and directed.

Cutting into existing manholes for connecting new drains for 150mm bore pipe, good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

Roughening surfaces of old concrete floor by sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified & directed.

M&L for first or premium quality full body Vitrified Ceramic dark shed coloured tiles 10 mm thick (square/ rectangular, Full body vitrified) polished, area of each tiles n.exc 0.36sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for first or premium quality Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and directed.

S&F mild steel rolled work as in main and cross beams, hip, jack rafters, purlins connected to common rafter & running rails guides for sliding doors fixed with angle cleats and other plates distance pieces cleats etc of Fe-410 W (grade E-250) quality-B. complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixing with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixing with self tapping screws complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc1.5 but n. exc 4 Sqm each complete all as specified and directed.

Taking down cement or cement lime plaster any description including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for preparing new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer over a coat of 1mm thick Birla putty as base coat complete all as specified and directed.

M&L for preparing new plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L preparing old decorated surfaces of wall by washing, rubbing down and stopping of painted surfaces and applying two coat of cement base paint complete all as specified and as directed.

M&L for preparing old painted surface of steel or iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as directed.

Demolition of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and pre-cast articles complete all as specified and directed.

M&L for brick work with with using old bricks obtained from demolition old size straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 complete all as specified and directed.

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for or sliding with and including either hooks and hinges all as specified and directed.

M&L for second class hard wood glazed and skeleton shutter 35mm thick, factory made, open rebated and prepared to receive glass/gauge etc, without sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(a) of SSR part-I (2009)

S&F 30mm thick flush shutter, factory made, solid core construction with particle board care and plywood face panels commercial type on both side complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description, not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in foundation filling or mass concrete complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded mechanically crushed stone aggregate as in floor finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all specified and directed.

Demolition of Stone sett paving/ pitching of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut Pre Polished Kota stone slab 18 to 20mm thick (minimum size 30cmx45cm) as in flooring, laid over and including cement screed bed 20 mm thick in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete all as specified and directed.

M&L for machine cut pre polished Kota stone slab 18 to 20mm in thick single piece in stair case as in skirting/ dado or on vertical surfaces laid over and including cement screed bed 10 mm thick in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete all as specified and directed.

M&L 16-20mm thick Makarana white Marble stone including rubbing, polishing and necessary moulding complete fixed over 20 mm thick screed bed in CM 1:4 and pointing with white cement 1:2 using marble dust admixture to pigment to match the surface complete all as specified and directed.

Dismantling of existing ceiling of any thickness (fibre pulp, insulation etc) including cover fillet / framing etc complete all as specified and directed.

M&L for non asbestos 4mm thick fiber cement building boards fixed or laid/inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping including aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G .I. wire (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expansion hold fasteners 12.50mm dia 40mm long complete all as specified and directed.

M&L for providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate in foot path, hard standing, plinth protection etc finished the surface even & smooth without using extra cement laid in bays complete all as specified and directed.

Demolition of cement concrete un-reinforced in ground floors and paving not exc 15 cm thickness below or above ground level complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, fillets etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of water tanks etc ant type of work conforming to Fe 290, grade E-165 complete all as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, galvanised wire staples, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beading in square n. exc 0.50 sqm in each panes fixed any bldg height complete all as specified and directed.

S&F in repair curtain rod/ rail with stainless steel rod fancy type 20 mm dia including brackets and ends canopy complete all as specified and directed.

S&F in repair 145 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repair for rubber door seal 32mm wide and 5mm thick with aluminium strip of size 19mm wide and 2mm thick and fixed with screw complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in levelling course for laying tilling work etc finished surface fair and even complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate as in kitchen shelves etc complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar for inserting sunken pipe hold fast and making good in CM 1:3 or cement concrete 1:2:4 type B1depth of cutting full brick complete all as specified and directed.

S&F in repair 500 ltrs capacity rotational moulded polyethlene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F in repair ball valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe 20mm bore or brass ferrule complete all as specified and directed.

S&F in repair gun-metal 20mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair Vitreous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor complete all as specified and directed.

M&L for 20 mm thick granite (of any type) (work table rubbed and polished) for vertical surface beding in 12mm thick CM 1:3 and pointing with white cement 1:2 using marble dust admixture to pigment to match the surface complete all as specified and directed.

Rounding to edge of stone slab one edge, such on in stop, cooking platform, and other similar situation complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device. complete all as specified and as directed.

S&F in repairs chromium plated Jet spray health faucet with 1 Meter PVC Tube and hook complete all as specified and directed.

S&F in repair vitreous china urinal half stall size 590x390mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repair low level flushing cistern PVC 10 ltrs capacity with all internal fittings, bracket and 32mm bore PVC flush pipe, complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore complete all as directed.

Taking up or down steel tubing and connections 20mm bore complete all as directed.

Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) of 15mm bore of pipe including cleaning for refixing or removal from the site complete all as specified and directed.

Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) of 20mm bore of pipe including cleaning for refixing or removal from the site complete all as specified and directed.

S&F in repair bib tap 15mm bore, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair stop valve 15mm bore, chromium plated fancy type, with long shank and cup screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back type of size 550x400mm including cutting for and pinning in ends of brackets including 32mm dia chromium plated waste coupling, PVC waste pipe, brackets complete all as specified and directed.

S&F in repair 15mm bore dia of pipe pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and directed.

S&F in repair 100mm size mild steel butt hinges, medium weight cold rolled complete all as directed.

S&F in repair brass chromium plated two way angle cock, of 15 mm bore complete all as specified and directed.

S&F in repair low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm 32mm bore as waste pipe with suitable PTMT collor complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 300mm long aluminium anodized sliding door bolt with hasp & staple (bolt type) fixing clips of sheet cast or extruded section & fixing bolts, sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

M&L preparation of old plastered/unplastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

Taking down carefully point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for point wiring for one light/fan point controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories with decorative laminated sheet top cover 3 mm thick (Hylam) and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed.

All as per item No. 136 above but for one 5 Amps socket point controlled by one 5 Amps switch on same board.

All as per item No. 136 above but for one 5 Amps socket point controlled by one 5 Amps switch on independent board.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 136 to 139:- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

S&F switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

S&F switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

S&F socket outlet, 3/5 pin, 5/6 amps flush type complete all as specified and directed.

S&F socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

S&F fan regulator electronic step up type, SP 230 volt complete all as specified and as directed.

S&F lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

Taking down old unserviceable MCCB DBs / MCB DB / Main Switches including MCBs/ MCCBs/ Isolaters, complete all as specified and as directed. Note: Any disturbed surfaces of wall will be matched properly as the existing colour surfaces.

S&F factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F MCB, SP, 6 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SPN, 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

Taking down carefully old and unserviceable sub main wiring of 2/3 runs or main-wiring of any size of aluminium conductor cable from any position including wood batten, PVC conduit, steel conduit, PVC Casing capping etc including making good disturbed surface of wall ceiling etc complete all as specified and directed.

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed FRLS 4.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 2.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including non metallic rigid PVC conduit medium grade 20mm bore including accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of wall/ceiling complete all as specified and directed. (length of 2 No 4.0 sqmm conductor cable, 1 No 2.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed FRLS 6.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4.0 sqmm stranded copper conductor cable for earth continuity, drawn in & including non metallic rigid PVC conduit medium grade 20mm bore including accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of wall/ceiling complete all as specified and directed. (length of 2 No 6.0 sqmm conductor cable, 1 No 4.0 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed FRLS 10.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 6.0 sqmm stranded copper conductor cable for earth continuity, drawn in & including non metallic rigid PVC conduit medium grade 20mm bore including accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of wall/ceiling complete all as specified and directed. (length of 2 No 10.0 sqmm conductor cable, 1 No 6.0 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for cutting & chasing required on brick wall, exceeding 20 CM girth and making good to disturbed surface with cement mortar 1:3 including facing / finishing where as required to match with existing surfaces to recess the MCB DB/ sheet steel enclousure complete all as specified and directed.

M&L for cutting & chasing required on brick wall not exceeding 10 CM girth for concealed conduit wiring and for GI earth wire including making good to disturbed surface with cement mortar 1:3 and distemper / colour wash to match with existing surfaces including facing / finishing where as required complete in all respect as specified and directed.

S&F in replacement of worn out / rusted sunken box with pressed MS/GI steel terminal boxes 100mm x 100 mm of depth not less than 50 mm, flush type of thickness lot less than 1.22 mm of following size alongwith new 3.0 mm thick plastic laminated sheet cover of suitable size including cutting/drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete in all respect as specified and directed.

S&F in replacement of worn out / rusted sunken box with pressed MS/GI steel terminal boxes 175mm x 100 mm of depth not less than 50 mm, flush type of thickness lot less than 1.22 mm of following size alongwith new 3.0 mm thick plastic laminated sheet cover of suitable size including cutting/drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete in all respect as specified and directed.

Taking down old unserviceable light fittings conventional type from wall surface / ceiling or any position and making good the disturbed surfaces all as specified and directed.

S&F surface /wall mounted light fitting in CRCA powder coated white housing with pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make: Cat Part No for batten:- REGALBATTENT8UPTO1X18WDSBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips Cat Part No for Tubelight:- PHOTANULTRA2.01213T8SSTL18WLED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LEDtube 1200MM 18W865 T8 I-2100 lm of make Philips

S&F energy efficient LED light of 10 Watt of length - 02 Feet long having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make : Cat part No: -LUMILINEPLUSSBS10WLED865SPCSS of make Havells 'or' BN 021 LED10S- 6500 PSU GR S1 of make Philips 'or' LDL-10-WW of make Crompton

S&F, installation, testing of electric Water heater storage type geyser (with EPAC Inner Tank & steel/ABS Body with Metallic Finish Color Panel) of capacity 25 litres suitable for single phase 230 Volts, AC, 50Hz, BEE 5 star rating complete with all mounting arrangement, Hot & Cold water connection pipe, 3 pin plug top etc as required at site complete all as specified and directed. Note:- Any disturbed surfaces of wall will be matched with existing colour surfaces. complete all as specified. Make: Model Pebble 25L of Make Havells or equivalent in V-Guard/ Bajaj/ Racold

S&F exhaust fan single phase 230/240 volt AC 300mm sweep, 1400 RPM with painted louvers, metal body, including cutting holes of suitable size in wall, grouting of nuts and bolt etc required for fixing fan and making good to match the existing surface and making connection with twisted copper flexible wire 23/0.0076mm complete all as specified and directed. Make: Havells/Bajaj/CG.

M&L in replacement earthing with Galvanised iron earth plate electrode 600x600 mm and 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal GL) with top of earth plate not less than 1.5 mtr below GL connected to GI earth lead wire of size 4 mm dia connected to earth plate electrode by means of GI nuts, bolts and washers of galvanised iron or steel protected with and including 15 mm dia med grade ISI marked GI pipe upto a length of 7.5 mtr long as shown in electrical plate No 5 of MES Sch Part-I with and including PCC 1:3:6, C-1 pit with cover or RCC 1:2:4 B1 reinforced with welded steel wire fabric not less than 4 kg per Sqm watering arrangement within 20mm dia GI med grade pipe ISI marked, GI funnel with GI mesh, filling with mixture of common salt and charcoal necessary excavation and earth work in soft/loose soil including connected to earthing test point, and main switch/DB, testing and commissioning complete all as specified and directed. Note: (i) GI earth wire with GI pipe protection upto 7.5 mtr shall be deemed included in the item.

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 35 W LED street light fitting with high power LED as light source complete fixed on pole complete all as specified and directed. Make:-Havells Cat No.ENDCITYLITPLAT+SL35W LED757 SASYBOPCWOSPD or equivalent of approved make

S&F bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F LED 10 W bulk head fitting luminarire with opal diffuser complete all as specified and directed. Make Crompton Cat No LBH-10-CDLSYSKA equivalent Model of C&S,Havells.

S&F factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note: Punned thickness shall be measured for the purpose of payments.

Supply and laying burnt bricks old size sub class-B laid in trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and directed.

S&F 40mm bore GI pipe, light grade with all fittings laid in trenches, road crossing and fixed to walls, on poles etc for cable protection complete all as specified and directed.

Supply, laying and testing 10 Sqmm, 2.0 Core XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, galvanised steel strip or wire, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve complete all as specified and directed Note: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items.

Supply, laying in replacement and testing 10 Sqmm, 2.0 Core XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, galvanised steel strip or wire, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve complete all as specified and directed Note: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items.

Supply, laying in replacement and testing 35 Sqmm, 2.0 Core XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, galvanised steel strip or wire, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve complete all as specified and directed Note: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items.

S&F in replacement GI tubing, 25mm bore 'medium grade' galvanised, with all fitting and fixed complete to trench, walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair stop valve 25mm bore, cast copper alloy with long shank and cup screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

Siddhi Constructionn

M/S Garg Sons

Channa Brothers and Co.

JMD Enterprises