CA NO. CWE SGNR - 70 OF 2020-21 SPECIAL REPAIRS OF OR MESS KITCHEN AND DINING HALL BUILDING NO. P-1227 AT MILITARY STATION SRI GANGANAGAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Glazed ceramic tiles 350x 250x 7 mm/ 450X 350X 7mm thick as on vertical surfaces like dados or skirting over 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer-in-Charge.

Demolition unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

Material and Labour for non-skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even and fairand pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for receiving tiles and pointed in white cement mixed with pigment to match the colour or shade of tiles complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 75 mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in cement concrete in sub- floors, sub-bases, floors and pavings etc complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 15mm thick rendering in cement mortar 1:6 in external surfaces to brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 15mm thick rendering in cement mortar 1:4 in internal surfaces to brick or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 5 mm thick rendering in CM 1:3 on fair faces of concrete surfaces on patches as on ceilings finished even and smooth complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of new plaster surfaces and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of new plaster surfaces and applying two coats of oil bound distempering a over chalk whitening on new plastered surfaces complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of new plaster surfaces and applying two coats of cement base paint over a coat of white wash on new plastered surfaces complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation and complete removal of existing treated /painted old plaster surfaces and applying two coats of oil bound distemper complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation and complete removal of existing treated /painted old decorated plaster surfaces of wall and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of old decorated plaster surfaces and applying a coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation and complete removal of existing treated /painted old plaster surfaces /unplastered surfaces and applying two coats of white wash on walls complete all as specified and directed by Engineer-in-Charge.

Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer-in-Charge.

Taking up or down for 15 mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for steel water tubing galvanised 20mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs fency type bib taps,15 mm bore dia cast copper alloy, with crutch or butterfly handles, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs, chromium plated fency type bib taps, 15 mm bore dia cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or brass ferrule for 15mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Bib tap fency type 15 mm bore dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.((Minimum weight 15mm-105gms) complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs bib tap of 15mm bore dia standard of PTMT any colour high pressure screwed for iron pipe and fixedMinimum weight 15mm-120gms) with long body complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs 15mm bore dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs fency type pillar taps 15 mm bore of dia of PTMT any colour high pressure screwed for iron pipe and fixed Minimum weight 15mm-120gms) complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs 15 mm bore dia fancy type, chromium plated with long shank and cup (concealed type) stop valves, cast copper aloy with crutch or butterfly handles screwed down high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Stop valves 15 mm bore dia fency type chromium plated cast copper alloy,screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs 15mm bore pipe Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed by Engineer-in-Charge.

Dismantling water tank capacity exceeding 250 Ltr and not exceeding 500 ltr complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for rotational moulded polyethylene water storage tank 500 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for rotational moulded polyethylene water storage tank 1000 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs, 20mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer-in-Charge.

Dismantling cast iron pipe of 100 mm dia, jointed in cement mortar and taking out of trenches if required complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 100mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge.

Material and Labour for CI floor trap 100 mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-Charge.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning of any description complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

Demolation of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engineer-in-Charge.

Material and Labour for brick work with sub class 'B' Bricks, well burnt straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 44 here in before but for except bricks complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs stainless steel tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs water closet vitreous china squatting pan "Orrisa pattern" size 580mmx440mm white with integral foot rests (Excluding flushing cistern) including all joints and connection to trap, CI 'P' trap/S trap etc and making good to the floor complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs vitreous china wash hand basin, white flat back of size 550mmx400mm including brackets, 32mm bore brass chromimum plated waste coupling and 32mm bore low density ployethylene (LDPE) flush pipe of pressure rating 6Kgf/Sq cm (1.00 M long) , including 15mm cast copper alloy chromium plated pillar taps and 15mm bore 450 mm length PVC connection with PTMT nuts complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs low density polyethylene pipes (LDPE) 32 mm x 800 mm long of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs low density polyethylene pipes (LDPE) 40 mm x 800 mm long of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs vitreous china wash down water closet pan (Pedstal pattern), white excluding fixing bolts, flushing cistern and flush pipe, including plastic water coset seat, black cosed pattern with flat bottom, and cover and mild steel chromimum plated hinging device & trap complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs chromium plated shower rose of any colour with or without swivel joints any size including shower arm complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs soap dish vitreous china 160x160x90 mm fixed with screws complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Grating doom 100mm dia PTMT(minimum weight 25gms) complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs vitreous china urinals, half stall type, white h brackets, flush pipe grating and union for discharge pipe including waste pipe and trap complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Urinal spreader of PTMT any colour for fixing 15 mm dia pipe complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description and refixing in same opening of size exc 1.00 Sqm and n exc 2 Sqm complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames not exceeding 1.5sqm each complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Aluminium window and ventilator shutters, side humg type without sash , aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as hinges type B-21 100 mm size (2 Nos.), suitable handle (2 Nos.) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for powder coated Aluminum Grill any pattern aperture size 50 mm and wire dia 5 mm fixed with Aluminum Frame complete all as specified and directed by Engineer-in-Charge. Note- Aluminum frame shall be Measured and paid seperately

Supply and fixing for Fiberways Brand or equivalent Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturate polysterresinn and chopped mat.Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden black in all the three legs. The frame shall be covered with fiberglass from all sides MS stay shall be provided at the bottom to steady the frame complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for fiberways brand 30mm thick glass fiber reinforced plastic (FRP) paneled door shutter of required color and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for pressed steel door frame of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 74 here in before but for size 125 x 60mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd class hard wood complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 25 mm thick block board grade 2 quality interior grade decorative face veneers on both face fixed with screw to frame work as in kitchen cabinet complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and repared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 35 mm thick Factory made IInd class hard wood plain framed panelled shutters (Two Panels ) with lock rails and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS :1003 (Part -I) Klin Seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of wooden or wooden base surface and applying two coat of synthetic enamel paint (ordinary tint) on wooden Surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 100 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 75 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 100mm long cold rolled mild steel butt hinges “medium weight” complete all as specified and directed by Engineer-in-Charge.

Taking down steel window or ventilator fixed type with glazing bar complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for hasp and staple, safety type stove enameled black, of mild steel 100mm size complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Cement concrete 1:3:6 type C–1(20 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of steel surfaces over 10 cm width or girth, not otherwise described and applying two coats of applying synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Supply and fix for aluminium handles cast type anodised, 125mm long complete all as specified and directed by Engineer-in-Charge.

Supply and fix for aluminium handles cast type anodised, 75mm long complete all as specified and directed by Engineer-in-Charge.

Supply and fix for mild steel pressed handles, oval type, stove enamelled black 125 mm long complete all as specified and directed by Engineer-in-Charge.

Supply and fix for mild steel pressed handles, oval type, stove enamelled black 100 mm long complete all as specified and directed by Engineer-in-Charge.

Supply and fix for aluminium anodised barrel tower bolts of extruded section and fixed 100 mm size complete all as specified and directed by Engineer-in-Charge.

Supply and fix for mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 125 mm size complete all as specified and directed by Engineer-in-Charge.

Supply and fix for 150mm extruded aluminium alloy handles fabricated type complete all as specified and directed by Engineer-in-Charge.

Supply and fix for 300 mm mild steel sliding door bolts, clip type, stone enameled block with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, 4 on bolt plate 2 on staple plate complete all as specified and directed by Engineer-in-Charge.

Supply and fix for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-Charge.

Supply and fix for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, including punching or drilling out old glazing pins / spring clips and glazed with oil putty complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs 4 mm thick sheet glass ordinary quality and glazing with oil putty in each pane of size n exc 0.50 sqm complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs 4 mm thick figured glass ordinary quality and glazing with oil putty in each pane of size n exc 0.50 sqm complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs door closure hydraulically regulated, designation No 3 universal type suitable for door shutters (Aluminum body) of any size complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor and overall length of cover plate 140 mm complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor and overall length of cover plate 140 mm complete all as specified and directed by Engineer-in-Charge.

Material and Labour for machine cut Kota stone slab flooring 20 mm thick over 15 mm thick screed base in cement 1:4, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No.104 here in before but for on vertical surfaces over 10mm rendering in CM 1:4 finished even and fair complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 20 mm thick Green marble/Makrana white machine cut in skirting/dado, sehlves etc laid over 10 mm thick cement mortar 1:4 screed set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing complete all as specified and directed by Engineer-in-Charge.

Material and Labour for non skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floor laid in pattern with two or more coloured tiles combination and design as approved to match the wall ceramic tiles etc set and jointed in cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for receiving Tiles finished and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 107 here in before but for on vertical surfaces/skirting dados etc over 10mm rendering in Cement mortar 1:3 finished complete all as specified and directed by Engineer-in-Charge.

Demolition of RCC slabs, chajjas and similar items complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Reinforced Cement Concrete 1:1½:3, Type A–1 for slabs supported on walls, beams, columns and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

Form work to soffits of suspended slabs, such as roof slab, chajjas and similar work not exceeding 200mm thick with rough finished surface of concrete complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 112 here in before but for 5 mm dia and over upto and including 10 mm dia in stirrups, space and binders complete all as specified and directed by Engineer-in-Charge.

Material and Labour for making good edges of chajja / facia in proper shape with cement mortar 1:3 each chajja exc. 0.4 Sqm n. exc. 1.0 Sqm each complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 75 mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection finished even and smooth etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs for fancy type curtain rod 25 mm dia with brackets knob rings (size n exc 1.50 Rm each curtain) etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Chequered cement concrete tiles 30cm x 30cm x 25mm thick with over 50 mm thick Plain cement concrete 1:4:8 on sub-base with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in sunken portion and floor complete all as specified and directed by Engineer-in-Charge.

Material and Labour for water proofing treatment to RCC sunken slab as specified below complete all as specified and directed by Engineer-in-Charge.:- (a) 15mm plaster in CM 1:3 with WPC on raised vertical surface. (b) Cleaning the surface with wire brush/coir brush, removing loose material like dust particles ,dirt etc. (c) Creating fillet covering of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces. (e) Provision of glass fibre mesh of 2x2 mm immidiately on above coating (f) Apply second coat of two component modified polymer coating after 72 hours (g) Laying concrete 1:4:8 over the coating as per requirement (h) Joining the sanitary pipe with non shrink cementatiuos grout (k) Complete the treatment to be carried out by authorised applicator of waterproofing manufacturer Make :- Dr. Fixit/Fosroc/BASF/STP NOTE : (i) The Treatment shall be carried out as per the manufacturers industreis and as directed by eng-in-charge. (ii) The plan area of floor shall be consider for payment. (iii) WPC shall be measured and paid saperately.

Supply only Water proofing compound complete all as specified and directed by Engineer-in-Charge.

Material and Labour for cement concrete 1:5:10 Type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

Dismantling brick tiles, single layer on roof complete all as specified and directed by Engineer-in-Charge.

Demolition of old mud phuska, removing rubbish of the premises cleaning surface and preparing to receive new mud plaster complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Cement concrete 1:4:8 type B 2 40 mm graded aggregate in filling and mass concrete including necessary form work complete all as specified and directed by Engineer-in-Charge.

Material and Labour for roof treatment to RCC roof as follows:- (a) Cutting & uprooting grass on roof top,removing rubbish off the premises, cleaning the roof surfaces throughly using wire brushes to remove sharp projections, cleaning joints, washing, drying and removing all dirt/dust to receive concrete padding/plaster etc complete. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC, finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @ 100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP based membrane, (mineral finish) minimum weighing 3 Kg/Sqm reinforced with non woven polyster fabric ( weight not less than 150 gms/Sqm) by Torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by Engineer in charge. Makes:STP, Dr Fixit/Pidlite, Texsa India Ltd Notes: (i) All joints and change in directions should be covered with cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement /as per site requirement and cured well before laying membrane by torching. (ii) All angles and abutments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only. The name of firm shall be got approved by GE before carrying out the work. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having facilities for testing of membrane. (v) The guarantee of treatment shall be of minimum 10 years reckoned from date of completion of whole work.

M&L for preparation of old painted steel surface of any description over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint completea ll as specified and directed by Engineer-in-Charge

M&L for preparation of old painted wooden surface of any description over 10cm width or girth, including preparation of surface as knotting, burning off or removing, scraping paint from surface etc. and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Chage.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in Cement mortar 1:3 etc complete all as specified and directed by Engineer - in - Charge.

Material and Labour for concealed conduit point wiring complete for light on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes 60mm deep ,suitable length and 1. 2 mm thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 129 here in before but for one switch socket combination 5/6 Amps on independent board complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 129 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No.129 here in before but for one switch socket combination 3 pin 15 Amps on independent board with 2.5 Sqmm copper cable complete all as specified and directed by Engineer-in-Charge.

Material and Labour for concealed existing conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in PVC existing Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , and sinking's for new sunken cast iron/ pressed steel terminal boxes 60mm deep , switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and directed by Engineer-in-Charge.

All as per Srl item no 133 here in before but for one switch socket combination 5/6 Amps on independent board complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 133 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 133 here in before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs switch piano flush type 5/6 Amps single pole two ways complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for switch socket combination 6 Pin, 15/16 Amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply and fix for Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply and fix for ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs light fitting with LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose / connector complete all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and Date of Fixing. Make : Havells Cat Part No: LUMILINEPLUSBS20WLED865SPCSS , Bajaj Cat Part No. : BCLSBAL 20W CW, Crompton Cat Part No. : CCS-100-20-65-HL2-DP-NWH or as approved by GE

Supply and fix in repairs security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer-in-Charge Note : All LED lights should be marked with GE SGNR and Date of Fixing. Make : Havells Cat Part No : ENDURAPEARLSL25WLED757SASYTOPCMP, Bajaj Cat Part No. BRLEP 25W LED WH, Crompton Cat Part No. LSTS-25-CDL-M or as approved by GE

Supply and fix for angle holder insulated body with back plate for conduit fittings including LED bulb 9 W complete all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and Date of Fixing.

Supply and fix for LED lamp 9 W for angle holder complete all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and Date of Fixing.

Supply and fix in repairs compact and decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and Date of Fixing. Make : Havells Cat Part No. LUMILINEPLUSBS10WLED865SPCSS, Bajaj Cat Part No. BCLSB 10 WH, Crompton Cat Part No. LDL-10-CDL or as approved by GE

Supply and fix in repairs LED suspension light fitting 36 W (Fixture size : (L x W x H) in 1136x54x74 mm), aluminum extruded direct-indirect light effect gives homogenous light distribution effect & enhances the visual comfort with joining kit accessories and connecting to mains cable complete all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and Date of Fixing. Make : Havells Cat Part No. DESTELLODILP36WLED857SPMMAWH, Crompton Cat Part No. LCLP54-36-CDL or equivalent make in Bajaj or as approved by GE

Supply and fix in repairs Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery, glass well and including 10 watt LED lamp all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and Date of Fixing. Make : Havells Cat Part No : HEXAFT10WLED857SSYMBOPC, Bajaj Cat Part No. BIBWP 10W LED, Crompton Cat Part No. LBHP-10-CDL or as approved by GE

Supply and fix in repairs stepped type electronic fan regulator flush type for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in PVC conduict including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer-in-Charge. Note : PVC cable and PVC conduit shall be ISI marked

Supply and fix in repairs sheet metal enclosure for double door BD made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N1 Frame upto 125A ,Isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs MCCB TP&N 63 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Galvanised, steel rod 16mm diameter and 2.5 metres length for hanging ceiling fans upto 8.00 feet approx. from ground level complete all as specified and directed by Engineer-in-Charge.

Dismantling and refixing of ceiling fans of any size including providing fan hooks clamps complete all as specified and directed by Engineer-in-Charge. ---------------------------------------------------------------------------------------------- Note : A sum of Rs. 89,009.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 35 & 36(R) (Schedule of Credit) of Tender document

M/s AKG Engineers & Contractors

KHANNA CONSTRUCTIONS

PAREEK AND COMPANY

M/s Chopdar Builders

M/s Tarun Traders

Aggarwal brothers and company