Works contract for HT/LT line works in East/Sathy Sub Division(only for plains) of Sathy Division

Amount

Excavation of pole pit upto 27" (8.0 m) Pole by using JCB or manual

Excavation of stay pit 4.5' to 5' depth by using JCB or manual

Excavation of pole pit above 8 mtr Pole by using JCB or manual

Excavation of pole/stay pit hard rock requires blasting

Excavation of poles /stay pit hard rock without blasting (where houses are located)

Erection of PSC/RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

Dismantling of PSC/RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

Erection of PSC/RCC poles/Metal poles above 8m by using JCB or maual

Erection of Metal supports above 9.00m /RSJ/Rail pole/Fabricated poles/Tubular pole by using JCB or manual.

Erection of stay set complete

Fixing of HT "V" cross arms (all types) / channel cross arms/guarding Cross arms

Dismantling of HT "V" cross arms(all types) / channel cross arms/guarding Cross arms

Fixing of LT 3 phase cross arms

Dismantling of LT 3 phase cross arms

Fixing of LT Single phase cross arms

Dismantling of LT Single phase cross arms

Fixing of HT/LT TI Fittings

Dismantling of HT/LT TI Fittings

Fixing of HT pin Insulators 11 KV

Dismantling of HT pin Insulators 11 KV

Fixing of HT 11 KV strain disc.

Dismantling of HT 11 KV strain disc.

Fixing of LT pin Insulator

Dismantling of LT pin Insulator

Fixing of LT shackle

Dismantling of LT shackle

Fixing of Aluminium Knob

Dismantling of Aluminium Knob

Earthing of pole with coil earthing including burying looping and binding.

Paving of conductor,stringing etc complete with ACSR 7/3.35mm /AAAC 3.15mm Rabbit conductor

Paving of conductor,stringing etc complete with ACSR7/2.59mm /AAAC 2.50 mm weasel and ACSR7/2.11 mm conductor

Erection of Transformer structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos. Earth pits with tubs including painting of metal parts, structure poles, fixing of top channel seating channel, belting angle including concreting (Except erection of Transformer)

Guarding arrangements for HT Guarding

Loading of poles upto 8m /27'-0"

Loading of poles above 8m

Un loading of poles upto 8m/27'-0"

Un loading of poles above 8m

Transporting of poles from road site to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Transporting of poles from road site to pole pit including loading and unloading of poles by using JCB or manual beyond 100 m

Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)below 8 Kms (i.e) No return charge

Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)above 8 KM for additional KM. (i.e) No return charge

Dismantling of conductor,stringing etc complete with ACSR7/2.59mm /AAAC 2.50 mm weasel and ACSR7/2.11 mm conductor

Loading or unloading of Transformer upto 100 KVA for each

Loading or unloading of Transformer above 100 KVA and upto 200 KVA

Erection of New Transformer all capacities (with jumpering)

Erection of single pole Transformer structure complete in all respects with wiring, Earthing,fixing of open type fuse units, HT/LT LAS and jumpering 3 nos. Earth pit with collar including painting of metal parts, structure poles, fixing of tapping channel,transformer bed structure including concreting (Except erection of Transformer)

Erection of street light including fixure fitting

Erection of street light service

Releasing of single phase service and re-fixing.

Releasing of 3 Q service and (upto 50 HP) re-fixing.

Erection of D.P. structure with AB switch top channel, cross brancing, HG fuse set, earthing painting earthing painting, providing stay and pole concreting

Re-sagging of ACSR 7/2.59mm/AAAC 7/2.50mm weasel and ACSR 7/2.11 mm conductor

Drilling of hole in channel only 3/4"" & 1""

Clearing of branches of trees