Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.2 LAccepted-AOC ALAGAGOUNDANOOR CHAMRAJPET PO METTUR TK SALEM DT | METTUR | SALEM | TAMIL NADU | ₹5.2 L Quoted ₹4.4 L | 1 | Accepted-AOC L1 |
| 2 | 2₹5.4 LRejected-AOC M 18 HOUSING BOARD UNIT MADAYANKUTTAI POST METTUR DAM 636 452 | METTUR DAM | SALEM | TAMIL NADU | 636452 | ₹5.4 L | 2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | THIAGARAJAN ENGINEERING CONTRACTOR L2 | K Ezhilarasan L1 |
|---|---|---|---|---|---|
| 1.00 | Rectification of buck stay beams & supports by bringing to the original position, providing suitable locking pin and washer etc. and welding the scalloped bar, locking pin and washer and providing channels etc. charges inclusive of scaffolding | 12 | Nos. | 7,600 ₹91,200 | 6,735 ₹80,820 |
| 2.00 | Charges for fabrication of 900mm length x 600 mm width square shaped Buck stay corner cover plate using 3 mm MS sheet by cutting, bending and welding and painting with 1 coat of heat resisting Aluminium paint. | 8 | Nos. | 4,000 ₹32,000 | 3,290 ₹26,320 |
| 3.00 | Charges for cutting and replacing of defective/ buckled end plate in the rear side of LTSH upper bank area in boiler II pass which is provided to protect the end coil erosion by cutting the M.S. plate to required size and providing stiffener plates to equal distance | 1 | Time | 44,500 ₹44,500 | 39,500 ₹39,500 |
| 4.00 | Charges for providing new M.S. plates in the middle side of boiler headers such as rear side, left side and right side headers in Boiler II pass to protect header erosion | 1 | Time | 33,500 ₹33,500 | 28,000 ₹28,000 |
| 5.00 | Petty iron work for truss, straps etc., (wrought & fixed) labour only | 1,000 | kg. | 80 ₹80,000 | 60.5 ₹60,500 |
| 6.00 | Charges for leading, lifting and arranging platform and scaffolding wherever required in the boiler and dismantling after completion of work. | 1 | Time | 14,750 ₹14,750 | 13,200 ₹13,200 |
| 7.00 | Charges for fin welding :Charges for fin welding by cleaning, surface preparation and welding. | 200 | Mtr. | 875 ₹1.8 L | 712 ₹1.4 L |
| 8.00 | Welding electrode Supratherm special 3.15mm with material/ manufacturer's test certificate | 1,400 | Nos. | 15 ₹21,000 | 9.4 ₹13,160 |
| 9.00 | Cutting Gas | 1 | set | 3,800 ₹3,800 | 3,490 ₹3,490 |
| 10.00 | welding Electrode | 2 | kg. | 540 ₹1,080 | 437 ₹874 |
Tender Value
Refer Docs
EMD Value
₹4,600
Closing Date
7 Oct 2025, 2:00 pmClosed
Superintending Engineer /Mechanical-I/MTPS-I
Office of the Superintending Engineer / Mechanical -I Mettur Thermal Power Station- I Mettur Dam-636406
MTPS I BM UNIT III Boiler pressure parts AOH 2025 Rectification of buck stay beam and supports renewal of wornout buck stay pin Fabrication of buck stay cover plate etc in Ist and II nd pass area and allied works
2025_EB_608037_1
CE / MTPS-I / SE / M-I / BM /OT.277/ 2025-26
Open Tender
Power/Energy Projects/Products
25 days
Mettur Thermal Power Station-I / Mettur Dam
As per the Tender Specifications
4 documents required · 4 mandatory
₹0
₹4,600
Yes
29 May 2026
23 Sept 2025
8 Oct 2025
23 Sept 2025
7 Oct 2025
23 Sept 2025
Amount
Rectification of buck stay beams & supports by bringing to the original position, providing suitable locking pin and washer etc. and welding the scalloped bar, locking pin and washer and providing channels etc. charges inclusive of scaffolding
Charges for fabrication of 900mm length x 600 mm width square shaped Buck stay corner cover plate using 3 mm MS sheet by cutting, bending and welding and painting with 1 coat of heat resisting Aluminium paint.
Charges for cutting and replacing of defective/ buckled end plate in the rear side of LTSH upper bank area in boiler II pass which is provided to protect the end coil erosion by cutting the M.S. plate to required size and providing stiffener plates to equal distance
Charges for providing new M.S. plates in the middle side of boiler headers such as rear side, left side and right side headers in Boiler II pass to protect header erosion
Petty iron work for truss, straps etc., (wrought & fixed) labour only
Charges for leading, lifting and arranging platform and scaffolding wherever required in the boiler and dismantling after completion of work.
Charges for fin welding :Charges for fin welding by cleaning, surface preparation and welding.
Welding electrode Supratherm special 3.15mm with material/ manufacturer's test certificate
Cutting Gas
welding Electrode
Fin Plate 1000 x 50.6 x 6 mm.
Fin Plate 1000 x 31.7 x 6 mm
T & Ps and consumables
THIAGARAJAN ENGINEERING CONTRACTOR (BID ID -1479597)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid