GEK-51/2020-21

Amount

Schedule 'A' Section - I

M & L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat of viscosity grade paving bitumen VG-10 confirming to IS-73 : 2006 @5 kgs /10 sqm on black surfaces and laying pre-mixed bituminious carpet 30 mm thick consolidated thickness and mixed with 0.41 cum per Ten Sqm of stone chippings mixed with 21.90 kgs of binder per ten sqm of viscosity grade paving bitumen (VG- 10 confirming to IS-73 : 2006) using continious drum mixing(mini hot mix plant), rolled and compacted to required camber and gradient with 8 to 12 ton power road roller to achieve uniform smooth surfaces and applying premixed sand seal coat mixed with 0.06 Cum of sand 6.80 Kgs of paving bitumenous of grade VG-10 (conforming to IS-73-2006) and rolled to uniform smooth surface with 8 to 12 ton road roller complete all as specified and as directed.

M&L for premix bituminious macadam (Consolidated thickness 75mm or less) with binder content 4% by weight of total mix & rolled with 8 to 12 tonne power road roller and compacted to required camber, gradient complete all as specified and as directed.

Repairs to pot holes any depth n. exc 30mm and of any description, n.exc 1 sqm each incl sweeping free from dust and mud or water, scoring sunken surfaces in roads etc, cutting around edges atleast 30 mm in depth, making good by applying tack coat viscosity grade paving bitumen (VG-10 confirming to IS-73 : 2006 ) @ 5 Kg per 10 Sqm putting in to bituminous premix as specified for bituminous carpet (3.00 cm consolidated thickness as specified here-in-after) well rammed/rolled and sealed with premixed sand seal coat (6.8 kg of binder mixed with 0.06 cum of sand) again well rammed (including supply of premix, binder and sand) complete all as specified and as directed.

M&L for repair to pot holes, any depth, not exceeding 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces of black top, cutting around edges at least 25mm in depth & making good by filling in screened & graded road metal, watering and well ramming (including supply or road metal) and inspected/approved before laying the premix carpet complete all as specified and as directed.

M&L for applying evenly a priming/tack coat of viscosity grade paving bitumen VG-10 confirming to IS-73 : 2006 @10 kgs /10 sqm on black surfaces i.e. pot holes and below Bituminous macadam complete all as specified and as directed.

M & L providing 2.5 mm thick road marking strips (Retro reflective) of specified shade colour using hot thermoplastic material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, gum beds dispenser propane tank healers and profile shoe heater driven by skilled operator on road surfaces including cost of materials labour T & P ceiling the road surface of all dirt, sclaes, oil grease and foreign materials etc complete as per the direction of Engr-in-Charge and strictly in accordance to applicator specifications.

S & F in repair cat eye road stud 100mm x100mm x20mm coloured yellow/red body made from polycarbonate rotro reflective micro prismatic tape,modified ABS Plastic of 20 ton load capacity fixed with necessary arregement complete all as spd

Amount of credit of Rs.415.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline at the time of acceptence of tender.

Rajesh Agencies