Renovation of House No. 28 in Officer Colony No. 3 at Gurugram.

Amount

Laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm(HSR 10.63.2) (Labour Rate)

Fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make inall colours, shades except burgundy, bottle green,black of any size asapproved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1 :3 (1 cement: 3coarse sand) and jointingwith grey cement slurry @ 3.3kg per sqm including pointing in white cementmixed with pigment of matching shade complete.(HSR 10.58) (Labour Rate)

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (HSR 28.16)

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement: 6 coarse sand).(HSR 7.20.2)

Providing and Fixing Poly Carbonate Sheet 1.25mm thickness on Gates and sgrills excluding the cost of MS framework but including the cost of nut bolts, Welding rods complete in all respect as per direction of Engineer-in-Charge.(HSR 13.20)

Laying of chequered precast cement concrete tiles 22 mm thickin footpath & courtyard, jointed with neat cement slurry mixed with pigment tomatch the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1 :4 (1 cement: 4 coarse sand).Medium shade pigment using 50% white cement 50% Grey cement(HSR 10.30.2) (Labour Rate)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted withspecial shaped washers etc. complete.Hot finished welded type tubes(HSR 13.30.1)

Fixing floor mounted, white vitreous chinaware single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous chinaware cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge (HSR-22.34) (Labour Rate)

Fixing water closet squatting pan (Indian type W.C. pan) with100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushingcistern, including flush pipe, with manually controlled device (handle lever)conforming to IS: 7231, with all fittings and fixtures complete, includingcutting and making good the walls and floors wherever required: White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rest(HSR 22.22.1) (Labour Rate)

Fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. Size 630mm x 500mm (above counter oval)(HSR-22.221.8) (Labour Rate)

Fixing wash basin with C.I. brackets, 15 mm dia CP Brasssingle hole basin mixer of approved quality and make, including painting offittings and brackets, cutting and making good the walls wherever required:- White vitreous chinaware Wash basin size 550x400 mm with a15 mm CP Brass single hole basin mixer (HSR-22.2.1) (Labour Rate)

Fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, including paintingof fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board: 510x1040 mm bowl depth 200 mm(HSR-22.10.1.3) (Labour Rate)

Fixing CP Brass Single lever telephonic wall mixer of quality &make as approved by Engineer in charge: 15 mm nominal dia(HSR-22.12.1) (Labou Rate)

Fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore(HSR 22.104.1) (Labour Rate)

Fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore(HSR 22.107.1) (Labour Rate)

Fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.(HSR 22.127) (Labour Rate)

Fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm (HSR 22.210.2) (Labour Rate)

Fixing C.P. brass shower rose with 15 or 20 mm inlet: 100 mm diameter 22.102.1) (Labour Rate)

Providing and fixing rectangular high density polyethylene water storage loft litre 7 8tank with cover, conforming to ISi : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.(HSR 22.182) 3 nos. (1000 Ltr.)

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter(HSR 9.57.2)

Fixing in position C.I. plain Nahani Trap conforming to I.S.I. specifications and of self cleaning design with C.P. brass hinged grating with frame complete50 mm i/d outlet plain Nahani trap (HSR 22.20.1) (Labour Rate)

Fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore(HSR 22.108.1) (Labour Rate)

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1 :4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1 :2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1 :5:10 ( 1cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1 :3 (1 cement : 3 coarse sand) 12mmthick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay non-modular bricks of class designation7.5(HSR 22.173.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes(HSR 22.86.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes(HSR 22.86.2)

Providing and fixing Bamboo Jaffri/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together withthree numbers horizontal running members of Hollock wood in scantling ofsection 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge.(HSR 12.116)

Providing & Fixing decorative high pressure laminated sheet of plain/ woodgrain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality 1.5 mm thick(HSR 12.12.1)

Providing and fixing 25 mm thick shutters for cup board etc. Panelled or panelled & glazed shutters : Second class teak wood including ISi marked anodised aluminium butt hinges with necessary screws(HSR 12.25.1.1)

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior gradeIS : 12823 marked, in shelves with screws and fittings wherever required,edges to be painted with polyurethane primer (fittings to be paid separately) 18 mm thick .(HSR 12.27.1)

Providing and fixing wooden moulded comer beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood50x50 mm (base and height).(HSR 12.28.1)

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj metrebeading of size 18X5 mm fixed with wooden adhesive of approved qualityand screws/nails on the edges of the Pre-laminated particle board as perdirection of Engineer-in-charge.(HSR 12.29)

Fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge.(HSR 12.34) (labour Rate)

Fixing bright finished brass butt hinges with necessary screws etc. complete 125x85x5.5 mm (heavy type)(HSR 12.76.1) (Labour Rate)

Fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm(HSR 12.78.1) (labour Rate)

Fixing bright finished brass handles with screws etc. complete: 100 mm(HSR 12.85.2) (Labour Rate) In case of any difference in the Unit & Nomenclature of any of the HSR Items of Civil, PH depicted in the DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable. The agency to whom the work has been allotted have to produce original bill/ voucher for all quantity in tokan of proof of purchase of material.

Bijender Singh