PROVN OF RAIN WATER HARVESTING SOLUTION AND CERTAIN MINOR AND REVENUE WORKS UNDER GE(N) PATIALA

M&L for cement concrete as in foundation Type D2 1:4:8 (40 mm graded aggregate aggregate) complete all as specified and directed

Excavation in trenches, in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point in soils complete all as specified and as directed.

M&L Cement concrete type C2, 1:3:6 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus, bulit in C:M 1:6 complete all as specified and as directed.

M&L PCC 1:2:4, type B-1 using 20mm graded stone aggregates as in coping and the like, slightly rounded or chamfered on the edges complete all as specified and as directed.

M&L for hardcore of broken bricks n exc 63 mm gauge ,diposited ,spread and levelled in layers under sub base floor n. exc. 15 cm thick ,watered and rammed to a true surface complwtw all as specifies and directed

Rendering 15 mm thick in cement mortar 1:4 on brick or concrete surfaces or in chajjas / parapet wall etc finished fair and even complete all as specified and as directed.

S&F expanded metal weight n.exc 4.0 kg per square metre, cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples fixed to wood or steel members complete all as specified and as directed.

Mild steel framed work such as grills, grating etc confirming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for preparing new surface of steel of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for loose filling with stone aggregate of gauge 40 to 80mm in trenches tanks complete all as specified and as directed.

M&L for loose filling with stone aggregate of size 10 to 20mm in trenches tanks complete all as specified and as directed.

M& L for coarse sand of size 1.5 to 2.0mm spread levelled in trenches etc complete all as specified and as directed.

M&L FACTORY MADE machine perssed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size of with grey cement and pigment tiles confirming to IS-15658-2006 of 60mm thickness M-35 grade and including filling of interstices with fine sand over including 25mm thick layer of sand cushion complete all as specified and directed by Engr-in-Charge.

M&L for applying 2 coats of cement base paint by using roller to wall surfaces over and incl a coat of wall primer as recommanded for under coat by manufacturer complwete all as specified and directed

Driling pilot bore hole of 150 mm dia by rotary method (Direct/reverse) through rig machine for injection well in any kind of soil strata or rock including disposal of surplus soil/rock to a distance not exceeding 50 metre complete all as specified including depolying required rig machinery. T&P , equipment etc, complete including transporting of all materials like rig machine, tools & plants, collection of log samples (drilling /cutting ) and to maintain drill time log book (for 03 bore holes). complete all as specified and directed by Engr-in-Charge.

Reaming of 150mm pilot bore hole to 300 mm bore with direct circulation rig machine / reverse rotary circulation method in any kind of strata of soil /rock from ground level to 100 Metre depth below ground level (for 03 bore holes) complete all as specified and directed by Engr-in-Charge.

Supply, assembling, jointing, lowering and fixing in position PVC plain casing pipe, heavy duty of size 150mm dia with wall thijness 7.5 to 8.5 mm conforming to IS-4985 having male threads at spigot end and female threads at socket endscrewd and socket type in all jointing accessories complete all as specified and directed by Engr-in-Charge.

Supply assembling, jointing, lowering and fixing in position PVC screen casing pipe, heavy duty of size 150mm dia having slot of size 1.5 mm wall thickness 7.5 to 8.5 mm conforming to IS-4985 having male threads at spigot end and female threads at socket endscrewed and socket type in all jointing accessories complete all as specified and directed by Engr-in-Charge.

M&L PVC bail plug assembly suitable for 150mm nominal bore PVC casing pipe internally threaded and jointed with casing pipe complete all as specified and directed by Engr-in-Charge.

M&L Mid steel housing clamps 1050mm long 200mm wide made out of 12 mm thick MS plate made to shape for 300mm bore casing pipe with necessary bolts, nuts and washers at ground level complete all as specified and directed by Engr-in-Charge.

M&L PVC well cap 8mm thick, Suitable for 150 mm bore, having internal threads complete all as specified and directed by Engr-in-Charge.

M&L Develepoment of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water. (6 hours for each well ) complete all as specified and directed by Engr-in-Charge.

Supply and packing pea gravel of size 2 mm to 4mm all around casing pipe and slotted pipe complete all as specified and directed by Engr-in-Charge.

M&L PVC cross of size 150mm with 100mm brances heavy duty having internal thread

M&L PVC screened collector pipe having slot of 1.5mm size heavy duty of size 100mm dia.

Demolition posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion (posts embedded in natural ground or hard core) and making good disturbed ground complete all as specified and as directed by Engineer-in-charge.

Excavating in post holes (Soft or loose soil) or similar holes each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface.

S & F posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire etc,flat iron fillets (for securing wire mesh etc) including all necessary drilling,bolting or riveting,etc and similar work conforming to Fe-290 Gde E-165 cleats etc complete all as specified and as directed by Engr in charge.

S&F for framed work in doors, or gates of angle or other section with gusst plates, rails, braces etc. complete drilled for fixing of steel sheeting or other coverings. Doors etc. to be prepardfor hanging or sliding with and including either hooksand hinges or steel hanging door fittings ( exclusive of steel sheetingor other coverings, running railsand guides) and hangingsalso fastening and fixing complete all as specified and as directed.

Supply &Fixing chain link fencing 4 mm dia galvanised steel wire 100mmX100mm mesh made up into matreeses and cages, lappd wire and laid in position including closing after filling fixed in repair including surface dressing/cleaning/trimming of surfaces and removing all vegetation bushes/small tress and removing out of MOD land complete all as specified and as directed.

S&F MS round bars of 10mm dia cut to length as in horizontal for chain link fencing including necessary hooking at ends complete all as specified and directed.

M&L Preparation of new steel surfaces of any description over 10 cm width or grth and width or girth and applying two coats synthetic enamel paint over a coat of red oxide /zinc chrome primer all as specified and directed.

Demolition of Brick work including all quoains and arches, pillars etc built in cement mortar complete all as specified and as directed by Engineer-in-charge.

M&L for Brick work using modular size bricks with sub class 'B' bricks curved on plan with mean radius not exc 6m with bricks roughly cut to radius or bricks with wedge shaped joints built in cement mortar 1:6 complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in as in PCC bends along chain link fencing complete all as specified and as directed by Engineer-in-charge.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-charge.

M&L for Rendering 15mm thick cement plaster in CM 1:6 on brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for Applying 02 coats of exterior emulsion paint (light shade) by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer as recommended for under coat by manufacturer of exterior emulsion incldg. prepration of surfaces complete all as specified and as directed by Engineer-in-charge.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge.

Removing excavated material (soils) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed by Engr-in-Charge.

M & L Reinforced concrete pipes of 300 mm dia, class NP3, laid and jointed complete with collars and jointed complete in cement mortar (1:1) complete all as specified and directed by Engr-in-charge.

M & L For Concrete bed to drain pipes including packing under and haunching against the sides of pipes with concrete after they are laid and tested, in Cement concrete 1:4:8 type D2 for Pipes 300 mm dia class NP3 complete all as specified and directed by Engr-in-charge

M&L hardcore of guage exc 63mm but n.exc. 100 mm (broken stone boulder) deposited, spread and levelled in layers n.exc. 15cm thick, watered and rolled / rammed to a true surface complete all as specified and as directed by Engr-in-Charge.

M&L for 75 mm thick PCC type C-2, (1:3:6) using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed by Engr-in-Charge.

S&F factory made for machine pressed precast concrete interlocking paver block any shape and size with grey cement and no pigment confirming to IS 15658-2006 of 60mm thickness M-35 grade over and including 25mm thick sand cushion complete all as specified and as directed by Engr-in-Charge.

M&L PCC 1:2:4 type B-0 (using 12.5 graded stone aggregate) as in kerb stone 300x300x100mm with CM 1:4 , rounded or chamfered on edges complete all as specified and as directed by Engr-in-Charge.

M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and as directed by Engr-in-Charge.

M & L for Sub main wiring with two single core 1.50 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit of suitable dia including 1.50 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 1.50 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 1.50 Sqmm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of (i) Cost of Rigid non-metallic PVC conduit of suitable dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc is included in the unit rate quoted by contractor. (ii) Cost of Cutting chases, pinning in making good to facing and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth is included in the unit rate quoted by contractor.

S & F Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified & directed.

S &F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed

M & L metal flush box, 1 module complete all as specified and directed.

M & L modular cover plate, 1 module complete all as specified and directed.

S&F Exhaust fan AC single phase 230/240 volt of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver, electrically connecting with twisted three core PVC insulted unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to Exhaust fan complete all as specified and directed by Engineer-in-Charge.

Material and labour for making hole of suitable size for exhaust fan 300 mm sweep in wall including grouting and making good the surface complete all as specified and directed by Engr-in-charge. Note: Cost of plastering,painting & cement work is included in this rate.

Please Enable Macros to View BoQ information