Supply, Installation of Tools / Equipment for Electronics Mechanic at Government Industrial Training Institute, Chhatna as per Tender Schedule B.

DC Regulated Variable DC Power Supply (0-32V/3A, Display Resolution 10mV/10mA, Connectivity USB Device)

LCR meter (Digital) Handheld Display: 2.8-inch Color TFT (4.5-digit dual parameter) Test Frequencies: 100Hz, 120Hz, 1kHz, 10kHz, 100kHz Measurement Ranges: Inductance up to 100H, Capacitance up to 100mF, Resistance up to 10MΩ Basic Accuracy: ±0.3% (up to ±0.05% on select ranges)

Digital Storage Oscilloscope 100MHz Two Channel, Sampling 1GSa/sec, 20Mpt, Alternate Trigger, Connectivity USB Host & Device, LAN, Display 7 Inch TFT

Battery Charger 0 - 6 - 9 - 12 - 24 - 48 V, 10 Amp

Function generator (Sine, Square, Triangle, Ramp, Pulse, and Modulation.) 1μHz -10MHz Function Generator, 125MSa/sec, 16k Memory,14-bit resolution Modulation AM, FM, PM, FSK, ASK, PWM, Sweep, Burst. Connectivity USB Host & Device

Soldering & Desoldering Station:- • Input Voltage: 210V – 230V AC, 50Hz. • Soldering Iron Power: 60 Watts (on dual/hybrid models) with temperature ranges up to 480°C. • Hot Air Gun Power: 550 Watts max with temperature ranges from 200°C to 450°C. • Safety Design: ESD-safe construction with micro-controller-based temperature displays.

Soldering magnifier lamp- • Magnification Power: Primary lenses range from 2.5X to 5X main zoom, with secondary auxiliary spot lenses reaching 12X to 35X for microscopic inspection • Illumination: Integrated 2 to 5 LED lights (some heavy-duty variants use ring lights with adjustable color temperature), powered via USB (5V/2A) or 3 AAA batteries • Physical Support: Features dual or quad alligator/crocodile holding clamps on adjustable joints • Base & Extra Tools: Built with a cast-iron or heavy steel-plated base (weight approx. 382g) for tip-over prevention, frequently bundled with a coiled soldering iron safety holder.

Test Point Microscope with USB Camera Pro-Range 3in1, 1000X, 8LED, USB Microscope Camera, Endoscope Type-c Electronic Magnifier with stand • 1000x magnification • 3-in-1 USB compatibility • Compact and portable

ASK, PSK, FSK Trainer kit Signal and Generator Specifications Carrier Frequencies: Sine wave outputs at 500 KHz (0°), 500 KHz (180°), and 1 MHz (0°) (or alternate ranges like 320 KHz and 640 KHz depending on the model). Data Generator: 8-bit variable Non-Return-to-Zero Level (NRZ-L) or NRZ pattern via data switches. Clock Frequency: Typically set around 250 KHz to 256 KHz for internal data triggering. Modulation and Demodulation Techniques ASK (Amplitude Shift Keying): Modulates carrier amplitude; uses a rectifier diode or linear detector for demodulation. FSK (Frequency Shift Keying): Shifts between discrete carrier frequencies; uses a Phase-Locked Loop (PLL) detector for demodulation. PSK (Phase Shift Keying): Shifts carrier phase (0° and 180°); uses a square loop detector or phase comparison circuit for demodulation. Hardware and Power Specifications Test Points: 39 or more accessible test points for signal observation via oscilloscope. Interconnections: 2mm or 4mm patch cords. Power Supply: Built-in regulated DC power supply supporting +5V/1.5A, ±12V/250mA operating on standard 230V AC, 50 Hz input.

AM/FM commercial radio receiver,four band radio receiver Table Top Analog AM/FM Radio Receiver ,at least AM Frequency range 400kHz to 1.5 MHz and FM reception Range 88MHz to 108MHz