Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.3 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹29.5 L+₹2.5 L (9.44%)Rejected-Finance | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹32.4 L+₹5.4 L (20.2%)Rejected-Finance 2 B KRISHNA NAGAR AMBALA CANTT | AMBALA | HARYANA | 133001 | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹36.6 L+₹9.6 L (35.6%)Rejected-Finance | L4 | Rejected-Finance Being not lowest |
Tender Value
Refer Docs
EMD Value
₹68,000
Closing Date
29 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major A R Thakkar
GE (P) Dappar
Spl Repair to Drianage in Adm Area and Addition/Alteration to Bldg No P-213 at Mil Stn Dappar under GE (P) Dappar
2022_MES_549696_1
GE (P) DPR-17/2022-23
Open Tender
Civil Works
Works
180 days
GE (P) Dappar
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE (P) Dappar
₹68,000
Yes
16 Dec 2022
3 Sept 2022
1 Oct 2022
3 Sept 2022
29 Sept 2022
13 Sept 2022
3 Sept 2022 - 13 Sept 2022
Amount
B/R Portion
Demolition of brick work built in cement mortar incl all quoins, arches, pillars, etc complete all as specified and directed by Engr-in-Charge.
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unrenforcemed) in ground floors and pavings of any thickness (below or above ground level), complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in cills, lintels, upto 1.50 metre clear span, copings, benching, bed plates etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works complete all as specified and as directed.
M&L Cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete and for embedding posts (including caps and bases) complete all as specified and as directed.
M&L rendering 15mm thick in cemet mortar 1:4 on brick work or concrete surfaces or walls etc finished even and fair complete all as specified and as directed.
Demolition of cement concrete (rainforced) in ground floors of any thickness (below or above ground level), complete all as specified and as directed.
M & L TMT bars 8 mm dia cut to length, bent to shape required including cranking, bending spirelly for hooping for columns, hooking ends and binding with and including mild steel wire (amended) not less than 0.9 mm dia complete all as specified and as directed by Engineer-in-Charge.
M & L RCC 1:2:4 type B-I (using 20mm graded aggregates) as in precast slab for drain cover complete all as specified and as directed.
S&F Plates Fe-410W(GdeE-250) Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated
M&L for applying two coats of synthetic enamel paint steel surfaces of any description, over 10cm in width or girth,not otherwise described.
Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border and the like works and flooring etc, 15-16 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.
M & L for reinforced Cement Concrete 1:2:4 type B1 using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.
M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge
M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge
M&L for cement plastering 15mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L applying 02 coats of distemper oil emulsion @ 10 sq.m/litre/2 coats by using roller/brush to new surfaces , over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)
M&L applying 02 coats of distemper oil emulsion @ 10 sq.m/litre/2 coats by using roller/brush to old wall surfaces , over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer Complete removal of existing treatment complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
S&F Aluminium anodised snap grid frame work for false ceiling size 605X605mm alll as specified.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
S & F gypsum board 12mm thick in ceiling fixed with screws as per manufactures instructions complete all as specified.
Dismantling of asbetos/fibre cement corrugated/semi corrugated sheet in roof covering including ‘J’ or ‘L’hooks complete all as specified.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of Tile Profile having TCT 0.50mm thick, rib height 28mm, Min. G550 Mpa Grade, pitch 200mm with 16mm step depth, of colour as approved as in roof covering, including supply and fixing of ridge of plain sheet of same colour, material and manufacturer fixed with fasteners/screws as recommended by manufacturer complete all as specified and directed by Engr-in-Charge. Note : Fixing of sheets will be done strictly according as per manufacurer's instructions. Make : Tata Bluescope or equivalent as approved by GE
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet of 0.5mm thick, rib having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge. Note : Fixing of sheets will be done strictly according as per manufacurer's instructions. Make : Tata Bluescope or equivalent as approved by GE
(a) S&F false ceiling of 12.5mm th gypsum board over and including concealed grid system complete fixed in all respect and all as per manufacturer's instructions in one/two/three levels and making recess for light fittings as per pattern/design approved by AO and including supply and fixing of items all as specified as below :- Note : The complete item shall be got executed through the authorised applicator of manufacturer only all as specified and directed. Make : Gyproc
(b) S&F Suspended Plain Ceiling includes Perimeter Channel {Material-GI(IS513),YS-260Mpa,Finish- Galvanised 150GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres. Make : Gypserra™
(c) S&F Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid. Make : Gypserra™
(d) S&F Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } is fixed to the Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} Make : Gypserra™
(e) S&F Ceiling Section {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish- Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. Make : Gypserra™
(f) S&F Single layer of 12.5mm tapered edge Plain (conforming to IS 2095-Part 1:2011, ISI Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Make : Gypboard®
(g) Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape. Make : Gyproc®
E/M Portion
Taking down carefully Copper/aluminium point wiring on wooden batten /pvc conduit /Pvc casing and capping (light/Socket/Power) complete including (Fittings such as switches, ceiling roses, pendants, regulators, sockets electric energy meters, light fittings, etc to be measured separately) removing materials to store and making good distrubed surfaces of walls. Floors etc to match with the existing including disconnection of ceiling/exhaust fan connection, complete all as specifed and directed by Engr-in charge.
Taking out existing sub main wiring of any description and size including earth wire incld wooden battens/ conduits/quities from stone/brick masonry walls, roofs, floors, etc. all as directed by Engr-In- Charge.
M& L in replacement of Point wiring complete with 1.5 sqmm (nominal area) PVC insulated unsheathed multistranded copper condutor single core cable 1100 volts grade FRLSH ISI marked drawn through and non metalic PVC conduit, ISI marked of not less than 20 mm dia, thickness 1.8 mm, concealed in wall, roof, etc, with all connected fittings including pressed steel terminal boxes, etc. suitable for mounting modular switches, sockets etc and including FRLSH PVC insulated unsheathed multistranded single core copper conductor cable of size 1.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings as specified and directed for the following:- Note:- Switches , sockets, ceiling rose, regulators etc shall be measured and paid separately. Quoted rate is deemed to be inclusive of cost of cutting chases in wall for incorporting conduit and cost for making good to existing wall with CM 1:4 not exceeding 10 cm grith & painting same so as to match the existing wall.Make : Havells/polycab/Grandlay
(a) One light / fan / Bell point controlled by one switch
(c) One 5 pin socket outlet independent 5 Amps
(d) One socket outlet 5 Amps on the same board with other switches.
(e) One 6 pin 5/15 Amps socket outlet independent with 2.5 Sqmm size copper conductor cable and 1.5 sqmm copper cables as earth wire.
M&L in of Sub main wiring with 4 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 4x6 sqmm (line conductor) & 1x6 sq mm (earth conductor), 1100 V grade drawing in & including heavy duty non metalic PVC conduit, ISI marked, incl accessories not less than 40mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as in earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note : (i) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. (ii). Suitable size cable lugs copper fabricated will be measured in the quoted rate only. (iii). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate.
M&L in of Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x4 sqmm (line conductor) & 1x4 sq mm (earth conductor), 1100 V grade drawing in & including heavy duty non metalic PVC conduit, ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as in earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note : (i) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. (ii). Suitable size cable lugs copper fabricated will be measured in the quoted rate only. (iii). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate.
S&F Modular switch 1 way 6 A, 1 module type single pole 240 volts and complete all as specified and directed by the Engr-in-charge.Make :Havells(Coral)/ABB(Adiya)/Legrand(Myrius)
S&F Modular socket 6Amps 2/3 pin combined 2 module 240 Volts complete all as specified and directed by the Engr-in-charge. Make :Havells(Coral)/ABB(Adiya)/Legrand(Myrius)
S&F Modular socket 6/16Amps 2/3 pin combined 2 module 240 Volts complete all as specified and directed by the Engr-in-charge.Make :Havells(Coral)/ABB(Adiya)/Legrand(Myrius)
S&F Modular switch 16Amps 2/3 pin combined 2 module 240 Volts complete all as specified and directed by the Engr-in-charge. Make :Havells(Coral)/ABB(Adiya)/Legrand(Myrius)
S&F in replacement sheet metal enclosure SPN 20 Amps earth plug socket complete with 20 Amp SPN, all as specified and directed by Engr-in-Charge.
S&F in replacement Modular Fan step regulator, 120 w-2 module 240 volts and complete all as specified and directed by the Engr-in-charge. Make :Havells(Coral)/ABB(Adiya)/Legrand(Myrius)
S&F White cover plate with frame 3 module 240 volts complete all as specified and directed by the Engr-in-charge.Make :Havells(Coral)/ABB(Adiya)/Legrand(Myrius)
S&F White cover plate with frame 6 module 240 volts and complete all as specified and directed by the Engr-in-charge.Make :Havells(Coral)/ABB(Adiya)/Legrand(Myrius)
S&F White cover plate with frame 8 module 240 volts andcomplete all as specified and directed by the Engr-in-charge. Make :Havells(Coral)/ABB(Adiya)/Legrand(Myrius)
S&F Modular Metal Box 3 module and complete all as specified and directed by the Engr-in-charge. Make :Havells(Coral)/ABB(Adiya)/Legrand(Myrius)
S&F Modular Metal Box 6 module and complete all as specified and directed by the Engr-in-charge Make :Havells(Coral)/ABB(Adiya)/Legrand(Myrius)
S&F Modular Metal Box 8 module and complete all as specified and directed by the Engr-in-charge. Make :Havells(Coral)/ABB(Adiya)/Legrand(Myrius)
Supply and fixing in replacement ceiling rose bakelite, 63.5mm 3 terminals with base plate ISI marked, complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement MCB SP 6 -32 Amps,10 KA, 'C' series 240 V ISI marked complete all as specified and directed by Engr-in-charge. MAKE : Legrand/ABB/Schenider
S&F in replacement for flush fixing of Sheet metal enclosure MCB SPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 240V, 12 Way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, including taking down of existing sheet metal enclosure complete all as specified and directed. Make : Legrand/ABB/Schenider. NOTE - (a). Cost of suitable size cable lugs and materials required for flush fixing of DB is deemed to be included in the quoted rate. (b). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate.
All as per above but Sheet metal enclosure MCB VTPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 240V, 4 Way, Double door with shrouded neutral bar
Supply and fixing in replacement MCB SPN 06-32 Amps,10 KA 'C' series 240 V ISI marked.complete all as specified and directed by Engr-in-charge. Make: Legrand/ABB/Schenider
Supply and fixing in replacement MCB TPN 63 Amps, 10 KA 'C' series 415 V ISI marked complete all as specified and directed by Engr-in-charge. MAKE - Legrand/ABB/Schenider
Supply and fixing in replacement electronic ceiling fan regulator ,rotary/socket step Modular type suitable for 220-280 V AC 50 Hz supply including all electrical connections complete as specified and as directed.
M&L for Taking down ceiling fan and connected cables removing it to safe place and Re-Fixing ceiling fan and connecting up including provision of cable from ceiling rose to fan complete all as specified and directed by Engr-in-charge.
S&F Light fitting pre wired 28 watts LED 2X2 recess mounting luminaire ceiling light fitting complete with driver and all accessories directly on ceiling/wall including connection with 1.5 sq mm PVC insulated copper wire, complete all as specified.Make:Havells cat no.PLUTONE02X2PLR28WLED840S or equivalent in WIPRO/PHILIPS
Supply & Fix LED recess mounted panel in a light weight plastic body round with inbuild driver in PC body 22W, 6000K and making good disturbed surface of area to match the existing surface, complete all as specified and directed by Engr-in-charge. MAKE Cat Pat No: LHEBFCP7IZ1W022 of Havells /Bajaj/Crompton
Ridhi Enterprises
M/S Mahal Enterprises
Supreet Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .