Repair and civil maintenance of staff quarters, inspection quarter and technical building at Campbell Bay DGPS Station.

Amount

Painting two or more coats with Interior Emulsion paint on internal surfaces of walls with Acrylic Emulsion Paint on Interior surface, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, over previously painted surface to give an even shade after preparing the surface properly & then cleaning the cement painting spots on the floors, furnitures, doors & windows etc as directed at site including supply of all materials, labours, tools etc. complete as directed by the engineer in charge.

Painting two or more coats with Exterior Acrylic Paint on outer surfaces of walls with 1st quality premium Acrylic Smooth Exterior Paint with Silicone additives of required shade (Asian /Berger )on previously painted walls surfaces work (two or more coats [email protected] /10sqm) over existing cement paint surface at all heights to give an even shade etc scrapping the old wornout paint, cleaning & preparing the surface properly & then cleaning the painting spots on the floor, furnitures etc after painting, removal and placing of all the items in existing position directed including the cost of supply of all materials, labours, tools & plants and all other charges etc.complete

Painting two or more coats with synthetic enamel paint on previously painted wooden surfaces of door,window, cupboards, ventilators & wherever necessary to give an even shade as diretced at site with S.E paint of approved 1st quality, brand & manfacture , colour & shade after scrapping the old wornout paint, cleaning & preparing the surface properly & then cleaning the painting spots on the floor, furnitures etc after painting & removal and placing of all the items in existing position directed including the cost of supply of all materials, labours, tools & plants and all other charges etc.complete

Providing and fixing up to floor five level precast cement concrete hollow block of 1:1.5:3 (1cement :1.5 coarse sand :3 graded stone aggregate 20mm nominal size) ,including hoisting and setting in position with cement mortar 1:3 (1cement :3coarse sand) including cost of required centering, shuttering with all materils, tools ,labours etc.as directed by the engineer in charge.

Repairs to plaster of thickness 12 mm to 20 mm in cement mortar 1:4 (1 cement : 4 coarse sand ) on wall surface, ceiling etc. after removing old damaged/ crack plaster of the patch 2.5 sq.meter and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls, ceiling complete including cost of all materials, labours, disposal of the rubbish to the dumping ground, all complete as per direction of Engineer in-Charge.

Petty repairs to wooden doors, windows, ventilators and cupboards for easy opening and closing including replacing damaged styles, rails, beading etc. including supply of all materilas, labours,tools etc. complete as directed

Petty repairs to wooden doors, windows, ventilators and cupboards for easy opening and closing including replacing damaged styles, rails, beading etc. including supply of all materilas, labours,tools etc. complete as directed

Anodised Aluminium Sliding door bolt 300X16mm

Anodised Aluminium butt hinges (125X75X4mm)

Anodised Aluminium butt hinges ( 75mm X63X4mm)

Anodised Aluminium tower bolt (250X10mm)

Anodised Aluminium tower bolt (150X10mm)

Stainless steel handles (125mm)

Stainless steel handles (100mm)

Polishing the wooden furniture with french polish in two coats after cleaning and preparing the surface properly and minor repairs to the furniture etc including the cost of supply of all labours,materials,tool & plants and all other charges etc complete

Wooden Office Table

Dining Table

Dining Chair

Wooden Meat Safe

Providing and fixing Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading on door,windows and ventilalors including supply of all tools & plants, labours, materials etc. complete as per direction of engineer-in-charge.

Replacement of broken glass panes of window as directed area not exceeding 0.10 Sqm. fixing with new 4 mm-thick Float glass fitted with teak wood beading disposal of debris etc. including the cost of supply of all labours, materials, tools & plants and all other charges etc. complete.

Cleaning of Septic Tank including cleaning the sewer line, inspection chambers, manholes and carried out minor repairs if any, including sealing the tanks with cement mortar, flushing the sewer line and tank with clean water and disposal of the wastes excrete/debris/deposits to the dumping site as specified by the local authority including cost of all materials, tools and plants, labour charges etc. complete as directed by the engineer incharge

Cleaning of under ground sump, over head RCC tank (independent staging) including disposal of silt and rubbish, including cost of all materials, tools and plants, labour charges etc. complete as directed by the engineer incharge. The cleaning shall consist following operations: (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc and pressure washed with water (iii) chlorination of RCC internal surface by liquid chlorine (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge.

Cleaning of terrace/loft water storage tank(inside surface area) upto 1000 litre capacity at all height with coconut brushes, dusters etc. removal of slit, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank and disposing of malba all complete as per direction of engineer incharge

Replacement of damaged/unserviceable water supply and sanitary fittings of approved 1st quality, brand and make to the water supply system including cost of all materials, labours, tools and plants and all other charges etc.complete.

15 mm nominal bore C.P. Brass Bib cock

15 mm nominal bore C.P. Brass Stop cock

Fixing ball valve (brass) (25 mm nominal bore)

100 mm dia. shower rose with 15 or 20 mm inlet

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

PTMT waste Coupling for wash basin & sink (38 mm dia, 83 mm length & 77mm breadth)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm dia including supply of all materials, labours, tools etc. complete as directed by the engineer in charge.

Providing and fixing PTMT 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88mm, weighing not less than 190 gms complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour including supply of all tools & plants, labour etc. complete as per direction of engineer-in-charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers including supply of all tools & plants, labour etc. complete as per direction of engineer-in-charge.

Providing and fixing P.V.C. low level white flushing cistern of 10 litre capacity with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. including cutting and making good the walls and floors wherever required, supply of all tools & plants, labour etc. complete as per direction of engineer-in-charge.

Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting fixing the pipe with clamps at 1.00 m spacing .This includes jointing of pipes & fitting with one step CVPC solvent cement and the cost of cutting chases and making good the same including testing of joints compelet as per direction engineer in charge.(concealed work including cutting chases and making good walls etc.)

P20mm nominal dia

25mm nominal dia

Provinding and fixing Second class teak /padauk wood 35mm thick glazed shutters panelled or panelled and glazed shutters for doors,windows and clerestory windows,including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws, including panelling ,all aluminium fittings complete as per direction of Engineer-in-charge

Construction of cement concrete drain in cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone) aggregate 20mm nominal size)including necessary earthwork, plastering etc as per drawing and as directed including supply of all labour, materials,tools etc complete

Providing and fixing Wicket gate with "C" Class G.I Pipe as directed including cost of supply,fabrication,fixing in position,fixing the rails and painting two coats with synethetic enamel paint over one coat of primer etc.including supply of all labours, tools,materials and finishing etc.complete as directed by the engineer in charge. wicket gate (0.98mm X 0.79 mm)

VENKAT BOAT SERVICES

Govinda Swamy Construction