REPAIR TO DRAIN, PATH, HARDSTANDING, FENCING, GATE AND MISC WORK AT OTM AND MD ACCN UNDER AGE B/R-1 OF GE (EAST) FEROZEPUR CANTT

Amount

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid bedded , dry and pointed in moter etc. complete all as specified and directed.

M & L sand filling under floors or in foundations including watering and consolidation complete all as directed by Engineer-in-charge .

M&L for 75mm thick Cement concrete 1:4:8 type D-2 using (40mm crushed graded stone aggregate) as in sub base of floor, finished top surfaces even and smooth complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 with grey cement and no pigment complete all as specified and directed.

All as per item No 5 but except tiles, complete all as specified and as directed.

M&L for Chequered cement concrete tiles (coloured) 20cmx20cmx25mm thick, set and jointed in neat cement slurry in floors over and including 15 mm thick screed bed in cement mortar (1:4) and pointed in neat cement mixed with pigment to match the shade of tiles, complete all as specified and directed.

M&L fpr providing and laying at ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement 3 coarse sand) including making joints with or without grooves ( thickness of joints except at sharp curve shall not be more than 5mm) including making drainage opening , complete all as specified and directed.

M&L for 75mm thick Cement concrete 1:2:4 type B-2 using (40mm crushed graded stone aggregate) as in floor, finished top surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 50 mm thick cement concrete type C-2, 1:3:6, using 40 mm graded aggregate as in plinth protection, path, hard standing etc. finished top surfaces even and smooth without using extra cement all as specified and as directed.

M&L Precast cement concrete Type B1, 1 :2:4 using 20 mm graded aggregate solid block as in kerb stone exc 10 cm width and set in CM 1:4 complete all as specified and directed.

M&L for preparation of new/old brick,stone,concrete or plaster surafces of any description not otherwise described , over 10 cm width or girth , applyinng two coats of synthetic enamel paint of approved shade complete all as specified and directed.complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getteing out in soft soil. complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in foundation filling & mass concreate complete all as specified and directed.

Returning, filling in including spreading levelling watering and well ramming in layeras n.exc 25 cm in soft soil complete all as specified and directed.

Removing excavated material n.exc 50M and deposting where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Dismantling of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M & L brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work with sub class 'B' brick using old bricks retrieved from dismantling under item 17 herein before including cleaning and removal of mortar from old bricks.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed.

M&L for Rendering 15mm thick on any faces of brick or concrete surfaces in CM 1:4 finished fair and even without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surface and applying two coats of cement base paint on wall surfaces complete all as directed complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash over walls complete all as specified and directed.

Dismantling fencing wire mesh, any type and specification complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed gound complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. M, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m in soft / loose soil and making good surface complete all as specified and directed.

M&L posts and struts for fencing and other steel section including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F Mild steel framed work of Fe-290 ( Gde-E-165) as in doors or gate of angle or other section with gusset plates,rails, braces etc and fixing complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description and in any position over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed.

M&L for Preparation of old steel surfaces of any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L plain cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate in plinth course, plinth band and similar work including necessary form work complete as as specified and directed.

M&L for Mild steel plain bars 10 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to complete all as specified and directed.

M&L for Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (40 mm graded aggregate) as in surface channel and drains complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc including provn of binding wire complete all as specified and directed.

Supply only chain link MS galvanated fencing any size or any type n exc 3 kg per sqm complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long diameter of the neck in 5 to 10 mm complete all as specified and directed.

M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) as copings, kneelers, apex stones, bed plates, kerbs, edge of paver block , water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L for providing precast cement concrete Type BO (1:2:4) using 12.5mm graded stone aggregate louvers and jallies, 25 mm thick (measured solid), including all mouldings but excluding frame set in cement mortaer 1:4 complete all as specified and directed.

M & L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

M/S Sandhu Const.Co.

M/s Harkesh Kumar Bansal