Loading
Loading…
Loading…
Tender Value
₹24.9 L
EMD Value
₹50,000
Closing Date
10 Jul 2026, 11:00 pm2d left
Directorate of Municipal Administration
Annual Maintenance For Repair Work of Pump Motor For The Existing Bore Wells From Ward no 14 to 27 at Malur CMC Limits
DMA/2026-27/OW/WORK_INDENT60274
DMA/2026-27/OW/WORK_INDENT60274
Open
Other Works
DMA City Municipal Council Maluru
4 documents required · 4 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)
completed as a prime contractor (50% of the cost of the work)value not less than Rs.10.60 Lakhs.( i.e 50 % of the amount put to tender cost)
Liquid assets and or availability of credit facilities of no less than Rs.7.50 Lakhs
Achieved in at least two financial years an average annual financial turnover of Rs.25.00 Lakhs
₹630
₹50,000
2 Jul 2026
2 Jul 2026
13 Jul 2026
8 Jul 2026
Annual Maintenance For Repair Work of Pump Motor For The Existing Bore Wells From Ward no 14 to 27 at Malur CMC Limits
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and tes...
Intermidiate piece(I.P) with I.P for leaded bronze bush
Oil seal steel bush
Impeller shell moulded with alluminium & bronze
Dishcharge outlet(D.O) Bearing and D.O Steel bush
Steel bush ( D.O steel bush)
Pump shaft (Stainless Steel)Counter less ground wit key way upto 8 stages
Pump key (Stainless Steel)Upto 8 stages
Pump coupling (Stainless)
Non return (NRV) assembly complete with rubber "0" rings
Labour Charges (Overhauling only)
Replace the components of motor parts of submersible pump sets, items requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labou...
Upper/Lower Housing
The Carbon Housing
The Carbon Housing (Thrust bearing block assembly complete with segment bearing pad.
The Carbon Housing (Top carbond / ferrodo padding)
The Stud and Nuts
The Gun Metal bearing, centrifugally cast Aluminium Bronze bearing bush
The Motor base with pin
The Transportation of pumping machineries
The Re-errection charges of pumping machineries including overhauling and painting
Labour charges for Lifting of non functioning submersible pump set along with cable and GI pipes (Each length = 6m) ). for 50 mm (PWD SR 2023-24, Vol-V, Pg no:142 l.no-12.25).
Wiring for lighting / power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...
Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor upto 20 HP capacities. (PWD ELE SR 2023-24, P:14, I.No:5.3).
Supplying and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 rating and as per IS-13947 40 A...
Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 m...
10 HP Monoblock Rewinding
Cutting and threading G.I. pipes for pump fitting, public fountains withappurtenances., where the length of pipe laid is less than 6 metres (PWD ELE SR 2023-24 P:15 /I No:2.2.2)Pipes of dia 32mm to 80...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Supplying and fixing of miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and "C" type curve, indicator ON/OFF energy cross-3 with short circuit breaking ...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden / panel using necessary nuts, bolts and washers.
Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid doc 60274.docx
Tender Document • 0.16 MB
Download all tender documents and submit your bid