REPAIR, MAINTENANCE OF BLDC CEILING FAN, EXHAUST FAN, WALL FAN AND HOT WATER APPLIANCES (GEYSER AND SOLAR WATER HEATER) WITH CONNECTED ACCESSORIES UNDER GE (EAST) AGRA AND CONNECTED WORK UNDER GE (E) AGRA

Taking down ceiling fan/exhaust fan /air circulating fan/wall fan of any size or of any make from any locations (OTM/Md Accn) under GE (East) Agra by disconnection eletric connection, cleaning the fan box area, bringing to AGE E/M Yard and refixing at the desired location after reassembling and removing of burnt out windings (copper/aluminium), servicing/ overhauling by thouroghly cleaning the shaft,rotor,stator and applying lubricant/ grease to bearings and one coat of super enamelled varnish over winding to improve the insulation resistance including repair /replacement of spare parts/ material/items,making connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length including using minor sparte/parts such as screws, insulation tape, split pins etc after cleaning the metal surface, greasing/lubricant etc to make it functional complete all as specified and as directed. Note:- (i) PVC copper flexible wire 1.50 Sqmm three core, nut bolts, washers, screws, capacitor clamp, warnishing included in the quoted rate. (ii) Other connected items required like re-winding, painting, capacitors, Bearings, Bush, Canopy,down rods, hanging clamps, nut & Bolts etc will be measured and paid sperately under respective items. (iii) Total service time from taking down to rehanging must not exceed 03 Days . (iv) Cost of T&P & transportation including taking down and re-fixing are included in the quoted rate

M&L for re-winding of ceiling fan 1200mm/1400mm sweep which of copper winding with proper grade/guage super enamelled copper winding wire so as to achieve original specifications i.e current rating and RPM (RPM test of ceiling fan with suitable tachometer will be done by contractor and shown to deptt , tachometer will be provided by contractor at their own expense) and all insulating materials (spares will be used and measure in respective items) and reasembling etc complete all as specified and directed. Notes for Sr No 2 to 6 : :- (i) The fans should be re-winded either of existing copper/ aluminium wounded. Schedule of credit deducted as per the burnt out winding (copper/aluminium). (ii) Before winding of fans winding to be cut in front of Engr-in-Charge. (iii) Under defect liability period, in case winding or any accessory i.e capacitor, regulator becomes non functional, it will be repaired without any extra cost within 05 days of complaints received.)

Description all as per item No 2 here-in-before but for exhaust fans of size 200 mm sweep to 380 mm sweep complete all as specified and as directed.

Description all as per item No 2 here-in-before but for exhaust fan of size 450 mm sweep complete all as specified and as directed.

Description all as per item No 2 here-in-before but for Air circulator fan of any size complete all as specified and as directed.

Description all as per item No 2 here-in-before but for wall fan of any size complete all as specified and as directed.

S&F in replacement of defective ball bearing for ceiling fans/exhaust fans/Air-circulators of any size and of any make complete all as specified and as directed.

S&F in replacement of defective capacitor of size 2.5 mfd ISI marked for any type of fans suitable for 250V/230V including making connection complete all as specified and directed.

S&F in replacement of ceiling fan regulator with new five step electronic (Socket /Switch type) AC 230/240 Volts suitable for any sweep complete including all fixing accessories including necessary electric connection complete all as specified and directed.

M&L for spray painting of ceiling fans/exhaust fans/air circulators of any size, any type and any make motor, body, blade and frame with one coat of synthetic enamel paint by spray painting to achieve smooth and uniform finish incl removal of existing paint, filling up cavities with filler and writing of MES No with black paint complete all as specified and directed. (Note :- Painting of fans must be done before delivery of fan by contractor to Deptt on the same day.)