Laying of pipeline in SRSP Adilabad segment

I) Construction of Pipeline

Construction of pipe line including supply,delivery,laying and Jointing of HDPE pipes for water supply as per IS:4985/1988, with its amendments and revisions thereon including supply of Pipes, trench excavation for Pipe lines in all Soils except rock requiring blasting, lowering, laying and jointing of pipe line true to alignment and gradient, and refilling trenches with excavated earth (other than rocky Soils and boulders) with watering, tamping and removing surplus earth from work site and testing pipe line with water and required pressure etc., complete as specified in Technical specifications (PartB - Volume I) and as per approved drawings. The rates are inclusive of cost, conveyance of all materials and labour chaarges needed for finished pipe line work

HDPE-90mm Dia of 8 kg/cm2

Kunta Dargha Jn to Gollaghat jn (Ch ; 0-3164) (Trench size 0.7X 1.0m)

Kunta Dargha Jn to Gollaghat jn (Ch ; 3164-3564) (Trench size 0.7X 0.6m)

HDPE-90mm Dia of 10 kg/cm2

Gollaghat JN to Tamsi K OHSR jn (Ch:3564-4974 ) ((Trench size 0.7X 0.6m))

HDPE-90mm Dia of 12.5kg/cm2

Proposed sump jn to Proposed New Sump

Proposed New Sump to Proposed sump jn

Cement concrete (1:4:8)prop using 40 mm gauge HG metal including cost &conveyance of all materials and labour charges ,seigniorage charges using concret mixer etc complete - for pumping header at pump house

RCC(1:1.5:3) using 20mm HBG metal including cost and conveyance of all materilas,labour charges and centering etc., complete but excluding cost of steel and its fabrication. - for pumping header at pump house

Supply and Fixing of DI D/F pipe Vetical Stem, Air Tee DI A/F and 0.6m DI D/F pipes including Cost of MS flanges 2nos. Air Valve Encasement for the stem pipe as per I.S.3896-part2-1985 and subsequent revisions as per SoR and Standard data for the year 2025-2026, including all jointing material and labour charges etc.(Reusing of Existing Air valve) - 50mm Dia Air Valve on 90mm Dia HDPE Pipe line

Supply and delivery of Single Chamber DI Scour Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 - 80mm Dia Scour Valve on 90mm Dia HDPE Pipe line

Manufacture, Supply delivery and fixing of DI D/F Gate Valves arrangement on HDPE Pipes (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538.PN16-All the valves fixed with , 0.6m D/F DI pipes 2nos,2 ns HDPE Tail Pieces, 2Nos MS Flanges,2, Jointing material such as Rubber Washers, Nuts and Bolts, Labour charges for lowering and fixing valves, With RCC Valve Chamber of Size 0.90X0.90X0.75 Mts , including Earth work Excavation, PCC(1:4:8), M20 Grade concrete for Raft, Side walls and Precast slab, supply and fabrication steel as per Approved Drawing etc complete for fininshed itme of work - 80mm Dia Gate Valve on 90mm Dia HDPE Pipe line

II) Construction of 60KL Sump

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

For sump Foundation. Up to 3m Depth

Suction pit Depth 3m -6 m Depth

Filling the Foundation with sand including cost,conveyance ,watering and ramming etc complete

PCC (1:4:8) using 40 mm HBG metal including cost and conveyance of all materials and labour charges etc., complete as per standard specifications for foundation levelling course

PCC (1:4:8) using 40 mm HBG metal including cost and conveyance of all materials and labour charges etc., complete as per standard specifications for foundation levelling course - For suction pit

RCC M30 Grade including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete

b) Side wall 150 mm Thick & Suction pit walls

c) Haunch portion

d) Top Slab-150 mm thick

Acco-proof Plastering with CM(1:3) prop. 8 mm thick with 2% acco-proof powder including cost and conveyance of all materials and labour charges etc., complete as per standard specifications for sump well

Plastering with CM(1:3) prop. 12 mm thick including cost and conveyance of all materials and labour charges etc., complete as per standard specifications for sump well

Snowcem painting with 2 coats over a primary coat including cost and conveyance of all materials and labour charges etc., complete as per standard specifications

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded

III) Open well Submersible Pumpsets

Supply, delivery ,transporation, errection, testing and commisioning of open well submersible motor pump sets for discharge of 169 LPM in 73 M Total Head with efficiency not less than 60% of Kirlosker/Crompton /Texmo/CRI/KSB make with water resistant dynamically balanced impeller with stainless steel sleeves pump coupling and pivot with squirrel cage inductor motor of 3 phase 415V 50HZ AC supply heavy copper windings with with water proof insulation and high pressure strength not to be efected by chemicals in water with suitable bronze bearings errected with h-type clamps odutable size and strength including cost of all materilas, transportation and all labour chrages as per the directions of the Engineer-in-charge

Supply and run of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete complete as per the directions of the Engineer-in-charge. Make: Finolex/RR Kabel/Havells/Nakoda

Supply and run of 3 Core 6 Sqmm Flat Copper cable as per IS 694:1990 for Submersible Motors. including providing end terimations with glands. lugs , crimping job etc complete as per the directions of the Engineer-in-charge. . Makes : Finolex / RR Kabel / Havells / Nakoda.

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I (Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through flange with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete.

Supply and Transportation of control panel for three phase submersible motors for 10HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor, suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

Manufacture, Supply and delivery of 100 mm dia PN 16 DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per IS: 1538. Specification and Dimensions as per I.S 5312 or equivalent codes.

Manufacture, supply and delivery of 100mm dia PN 16 DI (Ductile Iron) Wafer Butterfly valves conforming to IS 13095 (and its amendments). With hand lever below 150 mm, with Worm gear for 200 mm and above

Manufacture,supply, laying, testing & Commissioning of delivery MS pipes of pressure rating 16 Kg/cm2 conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, etc., complete,including providing & applying of epoxy coating ( 2 coat) as per the drawing

A)100mm,6mm thick

B)250mm,6mm thick

c)100mm,6mm thick

IV) Construction of Compound wall

Earth work excavation in hard gravelly soils and depositing on bank and disposing off from the site upto 250m lead . including cost and conveyance of all materials and labour charges etc., complete as per standard specifications.

PCC (1:4:8) using 40 mm HBG metal including cost and conveyance of all materials and labour charges etc., complete as per standard specifications for foundation levelling course

VRCC(1:1.5:3) using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete

CRS Masonary with CM(1:6) using rough stone (HBG) including cost and conveyance of all the materials etc complete

Brickmasonry in C.M.(1:6) including cost and conveyance of all materials and labour charges etc., complete as per standard specifications for super Structure

Plastering with 20mm thick with sponge finish in CM(1:5) including cost and conveyanceof all materials and labour charges etc., complete

Snowcem painting with 2 coats over a primary coat including cost and conveyance of all materials and labour charges etc., complete as per standard specifications

Supply and placing of the HYSD bars, fabrication

V) Construction of Pump room

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Filling the Foundation with sand including cost,conveyancewatering and ramming etc complete.

PCC (1:4:8)using 40 mm HBG metal icluding Cost and conveyance of the all materials etc complete.

VRCC(1:1.5:3) using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Columns footing,columns & plinth beams

Coloumns Below GL

Coloumns 0-3m Height ( Above G.L).

VRCC(1:1.5:3) using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Columns above 3m.

Coloumns 3-3.8m Height upto roof beams

CRS Masonary with CM(1:6) using rough stone (HBG) including cost and conveyance of all the materials etc complete

VRCC(1:1.5:3) using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Lintel Beams .

VRCC(1:1.5:3) using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Sunshades

VRCC(1:1.5:3) using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Roof Beams and Roof slab.

Roof Slab of 125 mm thick

Brick Masonary with CM(1:4) using Second Class Bricks including cost and conveyance of all the materials etc complete

Flush Pointing with CM(1:3) including cost and conveyance of all the materials etc complete

Alround Basement

Plastering with CM(1:3) prop 20mm thick to brick wall including cost&coveyance of all materials, lalbour charges,seign.charges etc.complete.

Accoproof plastering with CM(1:5),12mm thick including cost and conveyance of all the materials ect complete.

Flooring with CC (1:4:8) using 40mm HBG metal for 100mm thick and Top plastering with CM(1:3) ,20mm thick including cost and conveyance of all the materials ect complete.

Synthetic Enamel painting over primary coat and Enamel painting in two caots including cost and conveyance of all the materials etc., complete

Snowcem painting including cost and conveyance of all the materials ect complete.

Supply and placing of the HYSD bars, fabrication including cost and conveyance of all the materials etc complete.