Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹13.6 L+₹2.6 L (23.3%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹14.2 L+₹3.2 L (29.1%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹14.7 L+₹3.7 L (34.0%)Admitted-Finance | L4 | Admitted-Finance | |
| 5 | L5₹17.1 L+₹6.1 L (55.3%)Admitted-Finance JAMMU AND KASHMIR JAMMU AND KASHMIR | JAMMU | JAMMU AND KASHMIR | 181122 | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Trade Linkers Associates L2 | Rissam Traders L4 | V K ELECTRICAL CONTRACTOR L3 | SUNIL KUMAR SURI CONTRACTOR L5 | Power Consultant Engineers L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00SUPPLY, ERECTION AND COMMISSIONING AT DIVISIONAL STORES BATHINDI AND AMBEDKAR CHOWK FOR ILLUMINATION | ||||||||
| 1.01For 16 mtr. High Mast | ||||||||
| 1.02Survey, Design, Supply, Installation, Testing and Commissioning of illumination system, preparation of drawings and design calculation as per scope described in Technical Specification of NIT including Raising & Lowering Type High Mast System: Mast shaft shall be in single/ two/ three sections, hot dip galvanized, inside and outside in single dip, suitable for wind velocity as per IS 875 part 3. There shall be only longitudinal seam weld per section and no circumferential weld. It shall also include accessories for high mast including head frame, 2/3-point suspension system with steel wire rope 6mm dia 97/19 construction) double drum winch, Galvanised Lantern carriage arrangement suitable for 9/ 12/ 16 luminaries, lighting finial & integral power tool for raising and lowing operation of the high mast including foundation bolts as per drawings., with washers, anchor plates & templates, twin aviation obstruction lights (1 fitting per mast is necessary if no taller structures are in the vicinity), control panel housing suitable for control circuit for automatic switching ON and OFF of the mast. It shall also have suitable controls for operation of Power Tool for as per approved drgs. and specifications : | ||||||||
| 1.03 | 16 Mtrs. High Mast | 2 | Nos. | 4,21,000 ₹8,42,000 | 3,25,000 ₹6,50,000 | 2,50,000 ₹5,00,000 Lowest | 5,50,000 ₹11,00,000 | 4,56,500 ₹9,13,000 |
| 2.00Supply of all materials and making foundation of High Mast Lights for following high mast towers as per approved drrawings of mast manufacturer and approved by the Department | ||||||||
| 2.01 | 16 Mtrs. High Mast | 2 | Nos. | 1,00,000 ₹2,00,000 | 70,000 ₹1,40,000 | 2,50,000 ₹5,00,000 | 60,305 ₹1,20,610 | 10,000 ₹20,000 Lowest |
| 3.00 | Supply, installation, testing and commissioning of 200 Watt LED flood light fittings (make Havells,Bajaj) | 24 | Nos. | 3,500 ₹84,000 Lowest | 11,000 ₹2,64,000 | 10,000 ₹2,40,000 | 11,000 ₹2,64,000 | 4,000 ₹96,000 |
| 4.00 | Supply, installation, testing and commissioning of dust vermin and weather proof outdoor compartmentalized feeder pillar of suitable size made of 14 SWG M.S, sheet complete with the following:-
a)Canopy at top
b) Hinged door open able on both sides with heavy duty locking system -02 nos.
c) Base frame with detachable cover on all sides made out of 14 SWG steel sheets.
d) Legs of suitable length made out of 40mmx40mmx6mm angle iron i/c grouting the legs in 1:2:4 CC (1 Cement 2 coarse sand 4stone aggregate of 40mm nominal size)
e) Knock out holes at bottom for cable entry.
f) Ear thing stud – 02 nos.
g) One coat of primer and two coats of approved make & color of synthetic enamel paint.
h) 100 amps TPN MCCB, 25KA breaking capacity -01 No.
i) 40 Amps TP air brake contractor
j) 24 hour Electronic timer -01 no
k) 63Amp 4P MCB’s – 06 nos.
l) Termination incoming/outgoing cables with suitable sizes of ferrules & compression gland | 2 | Nos. | 82,000 ₹1,64,000 | 49,255 ₹98,510 | 40,000 ₹80,000 | 60,000 ₹1,20,000 | 10,000 ₹20,000 Lowest |
| 5.00 | 4 core x 16 sq. mm, 0.8M deep in 32mm HDP Pipe | 200 | mtr | 100 ₹20,000 Lowest | 1,100 ₹2,20,000 | 200 ₹40,000 | 300 ₹60,000 | 100 ₹20,000 Lowest |
| 6.00 | Supply and dawing of 3 core X 2.5 sq.mm PVC insulated cable for connection to lighting fixtures. | 200 | mtr | 80 ₹16,000 | 200 ₹40,000 | 120 ₹24,000 | 50 ₹10,000 Lowest | 100 ₹20,000 |
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
22 Jul 2025, 2:00 pmClosed
Executive Engineer, TLMD-IV, Jammu
Office of Executive Engineer, TLMD-IV, Jammu
INSTALLATION OF HIGH MAST LIGHTS IN DIVISIONAL STORES AT BATHINDI AND AMBEDKAR CHOWK FOR ILLUMINATION
2025_PDD_279650_1
TLMD-IV/J/06 Dated 24-06-2025 of 2025-26
Open Tender
Electrical Works
Turn-key
90 days
Ambedkar Chowk
As per SBD and NIT
3 documents required · 3 mandatory
₹1,000
Executive Engineer, TLMD-IV, Jammu
₹36,000
Office of Executive Engineer, TLMD-IV, Jammu
14 Aug 2025
25 Jun 2025
24 Jul 2025
25 Jun 2025
22 Jul 2025
5 Jul 2025
26 Jun 2025 - 2 Jul 2025
29 Jun 2025
Amount
SUPPLY, ERECTION AND COMMISSIONING AT DIVISIONAL STORES BATHINDI AND AMBEDKAR CHOWK FOR ILLUMINATION
For 16 mtr. High Mast
Survey, Design, Supply, Installation, Testing and Commissioning of illumination system, preparation of drawings and design calculation as per scope described in Technical Specification of NIT including Raising & Lowering Type High Mast System: Mast shaft shall be in single/ two/ three sections, hot dip galvanized, inside and outside in single dip, suitable for wind velocity as per IS 875 part 3. There shall be only longitudinal seam weld per section and no circumferential weld. It shall also include accessories for high mast including head frame, 2/3-point suspension system with steel wire rope 6mm dia 97/19 construction) double drum winch, Galvanised Lantern carriage arrangement suitable for 9/ 12/ 16 luminaries, lighting finial & integral power tool for raising and lowing operation of the high mast including foundation bolts as per drawings., with washers, anchor plates & templates, twin aviation obstruction lights (1 fitting per mast is necessary if no taller structures are in the vicinity), control panel housing suitable for control circuit for automatic switching ON and OFF of the mast. It shall also have suitable controls for operation of Power Tool for as per approved drgs. and specifications :
16 Mtrs. High Mast
Supply of all materials and making foundation of High Mast Lights for following high mast towers as per approved drrawings of mast manufacturer and approved by the Department
16 Mtrs. High Mast
Supply, installation, testing and commissioning of 200 Watt LED flood light fittings (make Havells,Bajaj)
Supply, installation, testing and commissioning of dust vermin and weather proof outdoor compartmentalized feeder pillar of suitable size made of 14 SWG M.S, sheet complete with the following:- a)Canopy at top b) Hinged door open able on both sides with heavy duty locking system -02 nos. c) Base frame with detachable cover on all sides made out of 14 SWG steel sheets. d) Legs of suitable length made out of 40mmx40mmx6mm angle iron i/c grouting the legs in 1:2:4 CC (1 Cement 2 coarse sand 4stone aggregate of 40mm nominal size) e) Knock out holes at bottom for cable entry. f) Ear thing stud – 02 nos. g) One coat of primer and two coats of approved make & color of synthetic enamel paint. h) 100 amps TPN MCCB, 25KA breaking capacity -01 No. i) 40 Amps TP air brake contractor j) 24 hour Electronic timer -01 no k) 63Amp 4P MCB’s – 06 nos. l) Termination incoming/outgoing cables with suitable sizes of ferrules & compression gland
4 core x 16 sq. mm, 0.8M deep in 32mm HDP Pipe
Supply and dawing of 3 core X 2.5 sq.mm PVC insulated cable for connection to lighting fixtures.
Making of earthing stations using chemical type 50mm dia GI earth electrode maintenance free and providing masonry enclosure with cover plate having locking arrangement as required
Supplying and laying of 6 SWG GI Wire on surface or in recess for loop earthing along with cable as required.
Trade Linkers Associates (BID ID -2408063)
V K ELECTRICAL CONTRACTOR (BID ID -2413710)
Rissam Traders (BID ID -2407988)
SUNIL KUMAR SURI CONTRACTOR (BID ID -2415162)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .