SPECIAL REPAIR TO JCO MD ACCN BLOCK NO P-49 AT GOLE KA MANDIR, MORAR CANTT UNDER GE GWALIOR

Amount

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Sqm each, removing from the site cutting holes exc 150 Sq.cm but not exc 400 Sqcm in super facia area into or through brick walls built in any mortar and making good in CM (1:3) or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exceeding 4.00 sqm each, removing from the site Cutting holes exceeding 150 Sqcm but not exceeding 400 Sqcm in super facia area into or through brick walls built in mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

S&F solid PVC door frame of size 50mm × 47mm made out of 5mm pre laminated colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specified and as directed.

S&F MS Pressed steel frames size 105 mm x 60 mm for doors with one or more redates including necessary fixing lugs hinges lock strike plate including filling of PCC (1:3:6) type C-0 in hollow portion of frame complete all as specified and as directed.

S&F MS Pressed steel frames size 125 mm x 60 mm for doors with one or more redates including necessary fixing lugs hinges lock strike plate including filling of PCC (1:3:6) type C-0 in hollow portion of frame complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S frame shall be covered with heat moulded pre lam colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail on either side and as gap insert for top rail and bottom rail, lock rail & bottom rail, panelling of pre lamanited colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement.

S&F factory made Solid PVC Moulded door shutter ,28 mm to 30 mm thick(stiles) with 2,4,or 6 raised panel design with 2 mm thick moulded Prelam PVC sheet on the front face & 2 mm prelame PVC Sheet on back face complete and fixing in frame complete all as specified and directed. .

S&F 35mm thick plain framed factory made panelled shutter (two panel) 2nd class HW rail and style with lock raid and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kitn seasoned and chemically pressure treated including preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 35 mm thick factory made glazed and skelton shutters 2nd class HW open rebated and prepared to receive gauage (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred bead for security glass etc. Size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) including preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F, Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dove tailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F, Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dove tailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

Supply and fixing galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed.

M&L 3 mm thick sheet figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed.

M&L 3 mm thick plain Sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed.

Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and as directed.

S&F 18 mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws, solvent cement /adehesive to make kitchen cabinet partion, shelves, shutter, drawer etc complete as per specifications and as directed by Engr-in-Charge .

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S & F 100 mm Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin including bolt to hinge plate complete all as specified and as directed.

S&F magnate catcher of metal body and striking plate heavy duty including fixed with screw complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvenised of size 25 mm flaps complete all as specified and as directed.

S&F 250 mm long aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) & fixing clips of sheet cast or extruded section etc complete all as specified and as directed.

S&F 250 mm long MS sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolt and nuts four on bolt plate and two on staple plate complete all as specified and as directed.

S&F 100mm butt hinges extruded alluminum alloy with galvanised mild steel hinge pine, anodised type C-22 complete all as specified and as directed.

S&F MS 150mm ordinary rat tail rod pattern springs including rollar and rollar plate complete all as specified and as directed.

S&F 125mm extruded aluminium alloy handle fabricated type, anodised complete all as specified and as directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors and paving not exceeding 15cm thick (below or above GL) complete all as specified and directed.

Taking down existing tarfelt from roof and removing from site all as directed.

M&L for 10mm thick rendering in CM (1:4) over roof ,surface finished even and rough mixed with water proofing compond complete all as speceified and as directed by engineer- in charge . Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only".

M&L for applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS-3384 @ 0.4 Kg/sqm. (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms / sqm ) laid on primed surface by torch application complete all as specified and as directed by Engr-in-Charge.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L PCC (1:2:4) Type B0 using 12.5mm graded stone aggregate as levelling course/mass concrete complete all as specified and as directed.

M&L, precast cement concrete tiles of size 250mm x 250mm x 20mm as in floor top, confirming to IS-1237-1980 laid over 15 mm thick screed bed in CM (1:4) and set, jointed and pointed in neat cement slurry in floors, and cut & polished between tiles 2 to 3 mm will be filled with CM(1:2) by mixing of chemical approved by the GE complete all as specified and as directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc. laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) Type C2 using 40mm graded stone agg as in plinth protection etc surface even and smooth without using extra cement complete all as specified and as diected by Engineer-in-Charge.

M&L 25 mm thick CM(1:2:4) type B0 (12.5 mm graded stone aggregate) finish rough to receive the floor finishes etc complete all as specified and as directed.

M&L Granite slab 16mm to 18mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 15 mm thick screed bed CM(1:6) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms including rounding off the exposed edges and polishing all as specified and directed..

M&L for machine cut Kota stone slab 18mm to 20mm thick as in flooring, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including screed bed or bedding layer of mortar 15mm thick in CM(1:6 ) complete all as specified and directed.

M&L for machine cut kota stone slab 18-20mm thick as in riser / steps, skirting, dado, cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10mm thick backing coat in CM(1:4) complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in CM(1:4) complete all as specified and directed.

M&L non skid ceramic Coloured tiles, 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in CM(1:4)set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 12mm thick rendering with CM (1:4) mixed with WPC over brick/concrete could surface fair & even surface complete all as specified and as directed.

M&L for 10mm thick rendering with CM (1:4) over brick/concrete could surface fair & even surface complete all as specified and as directed.

Supply only Integral water proofing compound complete all as specified and as directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying three coats of white wash on ceiling surfaces complete all as specified and directed.

M&L two coat of oil bound distemper over a coat of Birla wall care putty on plastered surfaces on wall including preparation of surfaces etc complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of surfaces complete all as specified and as directed.

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment and applying two coats of distemper oil emlusion white or tinted over a one coat of wall care putty on walls complete all as specified and dircted by Engr-in -Charge

Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down, smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.by Engr-in-Charge

Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L reinforced cement concrete (normal mix) (using 20mm graded aggregates) as in shelves etc complete all as specified and directed.

S&F TMT bars 6 to 8 mm dia cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and as directed.

M&L providing precast concrete as in cover slab, lintel etc using RCC (1:2:4) with 20mm graded stone agg including all form mould etc complete all as specified and as directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and as directed.

Supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge .

supply and laying 25 mm dia .of bore CPVC pipe SDR11 and plain CPVC SDR11 fittings (ISI) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge .

S&F in repairs 110mm dia PVC (SWR) type B pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as directed.

S&F 75 in repairs mm dia PVC (SWR) type B pipes single socketed, in any length with rubber ring joints,fixed in Wall/laid in floor complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes bends any radious with acces door complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) pipes bends any radious.with acces door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes junction, single (single T/Y) equal or unequal any radious.with acces door complete all as specified and directed.

S&F PVC (SWR) vent cowl for 110mm dia pipe complete all as specified and as directed.

M&L 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement as in repair complete all as specified and as directed.

M&L PVC (SWR) gully trap 125/100 plain with grating including jointing with solvent cement as in repair complete all as specified and as directed.

S&F of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet including all joints and making good to the wall and floor complete all specified and directed.

S&F 15mm angle cock chromium plated, cast copper alloy, with capston heads, scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair complete all specified and directed.

S&F in repairs stop valve screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all specified and directed.

S&F in repair s15mm, bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all specified and directed.

Supply only 15mm,pillar taps fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all specified and directed.

S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed fixed in repairs complete all as specified and as directed.

M&L 1st quality vitreous china squatting pan, orissa pattern size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor complete all as specified and as directed.

S&F 1st quality of vitreous china wash basin, white, flat back, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connection will be measured paid as supply only.

Supply only 15mm dia PVC connection with PTMT nuts of length 450mm complete all as specified and as directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass 60cm long and 12 cm wide with CP bracket guard and railing 60cm long complete all as specified and directed.

S&F soap dish of CP fixed with pvc rawal plugs and screw complete all as specified and directed.

S&F in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.

S & F Peg set of six S.S. fixed to wall with PVC plugs and screw complete all as specified and as directed.

S&F PVC bath room cabinate mirror of size 500mm x 400mm complete all as specified and directed by Engineer-in-Charge.

S&F in repair Curtain rail stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete specified and diected by engineer in charge.

Dismantling water tanks of any description and in any position of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

S&F Rotational moulded polyethylene water storage triple layer antibactrial film tanks (cylinderical vertical) 500 litres capacity, white colour hoisted and fixed in position complete all as specified and directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms / 25mm-455gms/ 40mm - 690 gms)

S&F in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and as directed.

S&F stainless steel kitchen plate rack made out of 1mm thick sheet of size 785x760mm and 250mm deep, weight not less than 7 Kg complete all as specified and as directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washer and waste coupling, waste pipe including bedding in CM to dwarf wall or including fixing cantilever brackets and connections to pipe over all size 915mmx460mm bowl size 410mmx330x160mm complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and av 15 cm deep and getting out in any type of soil complete all as specified and as directed.

M&L PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete complete all as specified and as directed.

S&F Machine pressed precast Coloured concrete Tile .( Rubber mould casted Glossy finish) size 300x300mm of 25mm thick over 20mm thick CM (1:6) screed bed complete all as specified and directed

M&L for 15 mm thick dubbing coat in CM (1:4) on ceiling surface complete all as specified and directed.

S&F small fittings such as brackets of any type latch and hinges blocks shaped door and window stops including all necessary labours articals nexc 200 cu.cm each of IInd class HW complete all as specified and directed

M&L prepartion of new/old plastered surfaces of walls, chajjas and applying two coats of weather proof water based emulsion paint (Acrylic paint exterior grade) complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring,125mm long, fixed in floor complete all as specified and as directed.

M&L for preparation surfaces for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and as directed.

S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe-310-0 complete all as specified and as directed.

Excavation in post hole each nexc 0.5 cum getting out returning filling with earth around in layers not exceeding 25cm with soil complete all as specified and as directed.

M&L Mild steel Angle iron for fencing post & strut in fencing & flat iron fillets (for securing wire mesh) including cutting tops to shape as directd all necessary drilling, bolting or riveting etc and similar work conforming to FE-290 Gde E-165 complete all as specified and directed.

S&F mild steel Plain bars 10mm dia & over as in reinforcement, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding with MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified & directed (as in Horizontal Bar of Fencing)

Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed. Note : Supply only chain link fencing will be measeured and paid separetly.

Supply only, chain link fencing of MS galvanized fencing, any size or type complete all as specified and as directed by Engr-in-Charge.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt exc 10cm but n.exc 20cm long and dia of neck 11mm to 15mm complete all as specified and directed

M&L two coat of synthetic enamel paint over coat of Red oxide primer over steel surfaces nexc 10 cm width or girth complete all as specified and as directed.

Cutting holes in brick walls of size 15cm x 15cm and depth of cutting exc half brick but not exc one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed by the Engr-in-Charge

M&L rolled section as in Rafter purlins, strut etc using MS angle FI or hollow square section etc including cutting welding nut bolt etc complete all as specified and as directed.

S&F Pre painted galvalume sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as directed by Engr-in-Charge.

M&L for taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated FRLS un sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC concealed conduit of med grade of not less than 20mm dia with all fitings and accessories including factory made MS/ pressed steel terminal box with zinc coated duly concealed in wall including modular metal flush boxes reqd as per site reqmt for mounting switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified :-

For one light point controlled by one switch

For one light point controlled by 2-two way switch

For one fan point controlled by one switch

One Bell/Buzzer point controlled by one way 5 Amp push button switch.

For one 5 pin socket out let 5 amps on same board complete.

For one 5 pin socket out let 5 amps on independent board complete.

All as per item No 116 here in before but with cable 4 sqmm (nominal area) multi stranded copper wire unsheathed for one 5 pin socket outlet 15 amps on independent board including continuous earth wire PVC insulated 2.5 sqmm copper multistranded conductor connecting to common earth and earth dolly complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified and directed. Make : Cona / Leader / Anchor.

S & F modular white cover plate with frame of 12/8 module complete all as specified and directed. Make : Cona / Leader / Anchor.

S & F modular white cover plate with frame of 06 module complete all as specified and directed. Make : Cona / Leader / Anchor.

S & F modular white cover plate with frame of 03 module complete all as specified and directed. Make : Cona / Leader / Anchor.

S&F Modular switch 1 way 06 amp single pole complete all as specified and directed. Make : Cona / Leader / Anchor.

S&F Modular switch 2 way 06 amp single pole complete all as specified and directed. Make : Cona / Leader / Anchor.

S & F modular switch socket combination 16A, 6 Pin of 3 module complete all as specified and directed. Make : Cona / Leader / Anchor.

S & F of modular socket outlet 6A-5 pin combined of 02 module complete all as specified and directed. Make : Cona / Leader / Anchor.

S & of moduar bell push 6 Amp 1 module complete all as specified and directed. Make : Cona / Leader / Anchor.

S & F of modular fan step regulator 120 W-2 module complete all as specified and directed. Make : Cona / Leader / Anchor.

S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed. Make : Cona / Leader / Anchor.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. Make : Cona, Leader, Anchor

S&F energy saving 10W LED 6000K surface/recess mounted luminaire fittings complete all as specified and as directed. Make : Halonix/Philips/Wipro.

S&F Ultra bright LED Tubelight with suitale for Regal Batten for LED Tube of 22 w incluing required length of 1.5 Sqmm PVC multistranded copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. Make : Halonix / Philips / Wipro.

S&F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 6 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed. Make : Halonix / Philips / Wipro.

M&L for Taking down fan, sealing cable and refixing the same all as specified and directed

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLS multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLS copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. Note : Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in CM (1:4) including finishing the surface to match with the existing surface.

S&F in repair MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed. Make : Legrand / Havells / Schnider.

S&F MCB SPN 40 to 63 Amps, 240 volts 'B' series 16 KA including connection with suitable size copper lugs complete all as specified and directed. Make : Legrand / Havells / Schnider.

S&F MCB SP 240 volts, 6 to 32 Amps, 'B' series 10 KA including connection with suitable size copper lugs complete all as specified and directed. Make : Legrand / Havells / Schnider.

Supply, install, commissioning and installation of distribution meter box indoor type, factory made out of CRCA sheet 2mm thick with angle iron 30x30x2 mm complete with inside, outside powder coated independed housing for meters with transperent glass & rubber gasket packing with suitable size copper single/ two core wire for each control, cable gland, with 200 Amp rated TPN aluminium busbar (for outgoing) duly insulated (including self insulated) maintaining proper space for each busbar and grouting panel in wall etc complete including locking arrangement and comprising for following fittings incl taking down existing MCB DB TPN 4 way complete all as specified and directed :- (a) MCCB TPN, 63 Amps ,16 KA - 01 No (For incoming) (b) Amp Meter (0-100 Amp) - 01 Nos (c) Volts Meter (0-500 Volts ) - 01 No (d) Indicator Lamp set of three R,Y,B - 01 Set (e) ASS & VSS with CTs - 02 Nos ( 01 Each) (f) MCB SP 40 Amps, 230 volts - 04 Nos (For outgoing) (g) Nutral bus bar link mounted on insulator. (h) Place for fixing the energy meter. - 04 Nos (i) The quoted rate is inclusive of removing the existing electric meter from the building and re fixing the same in the sheet metal enclosure at the same location without any damage to the meter. Make : Legrand / Havells / Schnider.

Taking out old unserviceable energy meter and supply & fixing new electronic energy meter (LCD display type) in polycarbonate or sheet steel body, ISI marked including anti temper features, communication port in class 1, 50 Hz. 240 Volts, single phase rating 10-40 Amp including sealing the electric meter with temper proof lead seal with sealed wire complete complete all as specified and directed. Make : HPL / L&T / Legrand / Havells

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area 25 Sqmm, 4 core complete all as specified and directed. Make : Gloster / Polycab / KEI

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L high density polyethylene pipes (HDPE) 80mm dia of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and directed. Make : Kisan / Supreme / Finolex

Returning, filling of excavated soil including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. Make : Tata / Swastik / Jindal.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe of required length etc complete all as specified and directed.

M/S SANJAY AGARWAL

BHAGIRATH CONSTRUCTION COMPANY

M/s Shri Diwakar Singh