Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹18.7 LAccepted-AOC 131 BASANT VIHAR NAUBASTA KANPUR NAGAR UTTAR PRADESH 208021 | KANPUR NAGAR | UTTAR PRADESH | 208021 | 1 | Accepted-AOC ACCEPT | |
| 2 | 2₹20.0 L+₹1.3 L (6.90%)Rejected-Finance GOHANA SONIPAT HARYANA | SONIPAT | HARYANA | 131001 | 2 | Rejected-Finance L2 | |
| 3 | 3₹20.2 L+₹1.5 L (7.98%)Rejected-Finance | 3 | Rejected-Finance L3 | |
| 4 | 4₹21.2 L+₹2.4 L (13.1%)Rejected-Finance 2075 SECTOR 3 124001 | ROHTAK | HARYANA | 124001 | 4 | Rejected-Finance L4 | |
| 5 | Not Admitted-Fee/PreQual/Technical KADARPUR ROAD KADARPUR ROAD NEAR PARJAPATI DHARAMSHALA BADSHAPUR GURUGRAM 122001 | GURUGRAM | HARYANA | 122001 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | virender hooda contractor L2 | The Jaharveer Goga Ji Co-Op L&C Society Ltd. L4 | Chandra Construction Company L1 | The Adishwar Cooperative Labour and Construction Scoiety ltd L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Submersible Pump | 1 | Set | 32,000 ₹32,000 | 31,000 ₹31,000 | 30,000 ₹30,000 | 18,000 ₹18,000 Lowest |
| 2.00 | Recovery item (Bricks) | 3,196 | NO. | 3 ₹-9,588 | 2 ₹-6,392 Lowest | 3 ₹-9,588 | 3.1 ₹-9,907.6 |
| 3.00 | recovery (brick bats) | 4.44 | cum | 4.5 ₹-19.98 Lowest | 1,000 ₹-4,440 | 540 ₹-2,397.6 | 325 ₹-1,443 |
| 4.00 | SS Designer Dustbin | 6 | Each | 1,500 ₹9,000 | 8,000 ₹48,000 | 1,500 ₹9,000 | 1,410 ₹8,460 Lowest |
| 5.00 | Leg press (BOTH SIDE) 90 x20x75 inches Equipment made to meet EN 16630 ,Epoxy coating of 100 microns GI main post-of:114 mm Dia Pipe thk. - 3.5 - 7.5mm Self-lubricating German bearing and Reinforced foot pedals for extended life Non fading LLDPE and open ends of the pipe closed by GULLDPE caps High tensile steel with galvanized nut bolts are used for assembly. Self Explanatory stainless steel label fixed on equipment for ease of use. foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge ) | 1 | Nos. | 38,900 ₹38,900 | 35,500 ₹35,500 | 25,000 ₹25,000 Lowest | 37,990 ₹37,990 |
| 6.00 | Seated Puller DIMENSIONS: - 1.9M (L) x 0.74M (W) x 1.92 (H). Seated puller equipment made up of “B” Class G.I. pipe. 100NB made from “B” Class G.I. pipe. Bottom support is of M.S. round plate of Ø 250 mm and 10mm thickness is welded. All linkages are made up of 25NB “B” class G.I. pipe. The handle frame is of 32NB “B” class G.I. pipe. The seat frame is of 32NB “B” class G.I. pipe, To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class. Welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 2mm thickness. Foundation cover Closing Cap is made from FRP Material with 0.7 mm Thickness. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and Powder coated 40 microns fixed in foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge ) | 1 | NO. | 40,680 ₹40,680 | 35,500 ₹35,500 | 28,000 ₹28,000 Lowest | 37,985 ₹37,985 |
| 7.00 | SHOULDER BUILDER DIMENSIONS: - 0.9M (L) x 0.9M (W) x 1.580M (H). Shoulder Builder Equipment made from “B” Class G.I. pipe of different NB.100mmNB made from “B” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter and 10mm thickness. The handle movement frame is of 25mm NB made from “B” Class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80mm NB”B”or “B” class welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 1.2 mm thickness and 20mm x 40mm CRC square pipe of 1.2mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø 25 mm of bright material. The bearing used is “6201zz” and “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nut bolts are used for assembly. The cerclips used for assembly is of A 24. The nylon bush is used for handle knob. The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge ) | 1 | NO. | 41,480 ₹41,480 | 35,000 ₹35,000 | 25,000 ₹25,000 Lowest | 37,980 ₹37,980 |
| 8.00 | CROSS TRAINER DIMENSIONS: - 1.32M (L) x 0.6M (W) x 1.75M. (H). Cross trainer equipment made from “B” Class G.I. Pipe of 80NB “B” Class G.I. Pipe with single bend pipe with 250mm radius. of M.S. round plate of Ø250 mm and 10mm thick. The Handle Frame is made up of 25NB “B” Class G.I. Pipe. M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 1.2mm thickness. To build structure bushes are used which are made from M.S.seamless pipe of 60mm OD. With 5 mm thickness. The footrests are made from casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 35mm, 25mm, and 17mm are made up from bright material. The Bearings used are of “6007” , “6205” and with 150 x 150 x 5 mm MS plate for nut bolting with stand. Powder coated 40 microns fixed in foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge ) | 1 | NO. | 35,500 ₹35,500 | 35,000 ₹35,000 | 28,000 ₹28,000 Lowest | 32,999 ₹32,999 |
| 9.00 | CHEST PRESS DIMENSIONS: - 2M (L) x 0.71M (W) x 2.15M. (H). Chest press equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The centerpipe is of 100NB made up of “B” Class G.I. pipe. The bottom welded with support of M.S. round plate of Ø250 mm and 10mm thickness. The connecting pipes are made up from 25NB “B” class G.I. pipe. The handle frame is made up from 32NB “B” class G.I. pipe. To build structure bushes are used which are made from MS seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Foundation cover Closing Cap is made from FRP Material with 0 The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge ) | 1 | NO. | 39,900 ₹39,900 | 35,000 ₹35,000 | 25,000 ₹25,000 Lowest | 37,997 ₹37,997 |
| 10.00 | Providing and Fixing of FRP Wave slide 3 mtr. Safe play area dimensions- 4000 x 900 ( in mm ) Frame Structure to be made in round tubular MS pipe (ISI) of 31mm o/d 65 x 20mm(2mm thick) for staircase with FRP platform with fibre mould slide. Curved railing Frame to be coated by phosporas with A-R treatment with minimum 40 microns layer of PP quality powder coating Foundation CC Mixture of 1: 1.5: 3 minimum 300mm Deep | 1 | NO. | 31,780 ₹31,780 | 36,000 ₹36,000 | 20,000 ₹20,000 Lowest | 29,980 ₹29,980 |
Tender Value
₹21.8 L
EMD Value
₹50,420
Closing Date
9 Aug 2025, 9:00 amClosed
MANJEET DAHIYA
Municipal Corporation Rohtak
Estimate for upgradation of Park front of H/o 10 and near house of Ranbir Chillar Pardhan RWA and Rasing of Green belt boundry wall in sector-4 Ward No. 9 M.C. Rohtak. (Re-call)
2025_HRY_462328_1
2025B4F2370F 245E 4DC9 B266 B3A71794BD8C287ULB
Open Tender
Civil Works
Works
90 days
Rohtak
2 documents required · 2 mandatory
₹2,500
₹50,420
Yes
29 Aug 2025
1 Aug 2025
9 Aug 2025
1 Aug 2025
9 Aug 2025
1 Aug 2025
Amount
Submersible Pump
Recovery item (Bricks)
recovery (brick bats)
SS Designer Dustbin
Leg press (BOTH SIDE) 90 x20x75 inches Equipment made to meet EN 16630 ,Epoxy coating of 100 microns GI main post-of:114 mm Dia Pipe thk. - 3.5 - 7.5mm Self-lubricating German bearing and Reinforced foot pedals for extended life Non fading LLDPE and open ends of the pipe closed by GULLDPE caps High tensile steel with galvanized nut bolts are used for assembly. Self Explanatory stainless steel label fixed on equipment for ease of use. foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )
Seated Puller DIMENSIONS: - 1.9M (L) x 0.74M (W) x 1.92 (H). Seated puller equipment made up of “B” Class G.I. pipe. 100NB made from “B” Class G.I. pipe. Bottom support is of M.S. round plate of Ø 250 mm and 10mm thickness is welded. All linkages are made up of 25NB “B” class G.I. pipe. The handle frame is of 32NB “B” class G.I. pipe. The seat frame is of 32NB “B” class G.I. pipe, To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class. Welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 2mm thickness. Foundation cover Closing Cap is made from FRP Material with 0.7 mm Thickness. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and Powder coated 40 microns fixed in foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )
SHOULDER BUILDER DIMENSIONS: - 0.9M (L) x 0.9M (W) x 1.580M (H). Shoulder Builder Equipment made from “B” Class G.I. pipe of different NB.100mmNB made from “B” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter and 10mm thickness. The handle movement frame is of 25mm NB made from “B” Class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80mm NB”B”or “B” class welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 1.2 mm thickness and 20mm x 40mm CRC square pipe of 1.2mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø 25 mm of bright material. The bearing used is “6201zz” and “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nut bolts are used for assembly. The cerclips used for assembly is of A 24. The nylon bush is used for handle knob. The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )
CROSS TRAINER DIMENSIONS: - 1.32M (L) x 0.6M (W) x 1.75M. (H). Cross trainer equipment made from “B” Class G.I. Pipe of 80NB “B” Class G.I. Pipe with single bend pipe with 250mm radius. of M.S. round plate of Ø250 mm and 10mm thick. The Handle Frame is made up of 25NB “B” Class G.I. Pipe. M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 1.2mm thickness. To build structure bushes are used which are made from M.S.seamless pipe of 60mm OD. With 5 mm thickness. The footrests are made from casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 35mm, 25mm, and 17mm are made up from bright material. The Bearings used are of “6007” , “6205” and with 150 x 150 x 5 mm MS plate for nut bolting with stand. Powder coated 40 microns fixed in foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )
CHEST PRESS DIMENSIONS: - 2M (L) x 0.71M (W) x 2.15M. (H). Chest press equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The centerpipe is of 100NB made up of “B” Class G.I. pipe. The bottom welded with support of M.S. round plate of Ø250 mm and 10mm thickness. The connecting pipes are made up from 25NB “B” class G.I. pipe. The handle frame is made up from 32NB “B” class G.I. pipe. To build structure bushes are used which are made from MS seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Foundation cover Closing Cap is made from FRP Material with 0 The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )
Providing and Fixing of FRP Wave slide 3 mtr. Safe play area dimensions- 4000 x 900 ( in mm ) Frame Structure to be made in round tubular MS pipe (ISI) of 31mm o/d 65 x 20mm(2mm thick) for staircase with FRP platform with fibre mould slide. Curved railing Frame to be coated by phosporas with A-R treatment with minimum 40 microns layer of PP quality powder coating Foundation CC Mixture of 1: 1.5: 3 minimum 300mm Deep
Bidder Name
Amount
virender hooda contractor (GSTN-NA) BID ID -1312960
The Jaharveer Goga Ji Co-Op L&C Society Ltd. (GSTN-NA) BID ID -1312957
Chandra Construction Company (GSTN-NA) BID ID -1312983
The Adishwar Cooperative Labour and Construction Scoiety ltd (GSTN-NA) BID ID -1312969
The Adishwar Cooperative Labour and Construction Scoiety ltd (BID ID -1312969)
virender hooda contractor (BID ID -1312960)
The Jaharveer Goga Ji Co-Op L&C Society Ltd. (BID ID -1312957)
virender hooda contractor (BID ID -1312960)
The Adishwar Cooperative Labour and Construction Scoiety ltd (BID ID -1312969)
The Jaharveer Goga Ji Co-Op L&C Society Ltd. (BID ID -1312957)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .