PERIODICAL SERVICES TO MD AND OTM ACCN INSIDE HOSPITAL AREA AT 7 AFH KANPUR CANTT

Amount

M & L for preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surfaces and applying one coat of white wash complete all as specified and directed.

Ditto all as per item No 1 above but on ceiling surfaces.

M & L for preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surfaces and applying two coat of white wash complete all as specified and directed.

Ditto all as per item No 3 above but on ceiling surfaces.

M & L for applying 1 mm thick wall care putty on wall surfaces complete all as specified and directed.

M & L for preparation of old distempered surfaces of walls including corinces, pillars etc and applying one coat of oil bound distemper complete all as specified and directed.

M & L for preparation of old decorated plastered surfaces of wall and applying two coat of oil emulsion distemper complete all as specified and directed.

M & L for preparation of old decorated plastered surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

M & L for complete removal of existing treatment of wall and preparation of old decorated surfaces including 1 mm thick wall care putty and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M & L for preparation of old decorated wooden /wood based surface of any description exceeding 10 cm width or girth by washing down with solution of alkaline soap to remove all loose dirt and oily & grease spots and applying one coat of synthetic enamel paint complete all as specified and directed .

Ditto all as per item No.10 above but on steel surfaces

M & L for preparation of old decorated wooden /wood based surface of any description exceeding 10 cm width or girth by washing down with solution of alkaline soap to remove all loose dirt and oily & grease spots and applying two coat of synthetic enamel paint complete all as specified and directed .

Ditto all as per item No.12 above but on steel surfaces

M & L for preparing old decorated plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M & L for preparing old decorated plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed.

M & L for preparing the surfaces and applying one coats of apex ultima paint with anti algae weather proof, 100% acrylic emulsion with silicon additives that offers an anti algae and high performance exterior wall finish complete all as specified and directed.

M & L for two or more coat of luxury emulsion with silver ion technology recommended by Indian Health Association, which kills 99 % of infection causing bacteria on painted surface and improoves indoor air quality by reducing formaldehyde (a harm pollutants), over modified acrylic, water based alkali resistant primer with silicon additives, resist alkali upto PH 12.5 and moisture resistant upto 15% over base coat of 2 to 3 mm thick water resistant cement modified compound with special additives over a single coat of fibre reinforced powder on old/new surfaces including preparation of surfaces complete all as specified and directed. (Note : Painting will be done through an authorised applicators only after written approval of GE.)

M & L for removing/cleaning of existing painted surfaces of ACP board in wall, column, beam etc with help of hand held/long hand sander and preparing the surface smooth and applying 100% Acrylic paint on ACP board using spray Gun/ Roller, thickness of layer shall be 0.5 to 0.9 mm including necessary scaffolding complete all as specified and directed.

M & L for re-writing letters or figures (Block roman italic or Indian ) by using synthetic enamel paint of colour as approved not exceeding 30 cm height complete all as specified and directed.

M & L for French polish on wooden surfaces of any description width or girth including cleaning and preparing the surfaces and one coat of wood filler on old works complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick in CM ( 1:6 ) plaster on wall / concrete surfaces finish even and smooth without using extra cement and applying two coats of oil emulsion distemper over a coat of primer over and including 1 mm thick wall care putty after preparing of new plaster surfaces complete all as specified and directed.

M & L for rendering 15 mm thick in CM ( 1:4 ) on wall / concrete surfaces with mixing water proofing compound (@ 3% by weight of cement) surface finish even and smooth without using extra cement complete all as specified and directed.

M & L for 10 mm thick plaster in CM (1:3) on ceiling finished even and smooth without using extra cement and applying three coats of white wash after prepration of new plastered surfaces complete all as specified and directed.

M & L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.

M & L for preparing new plastered surface of wall and applying two coat of cement base paint over one coat cement primer complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets of any thickness, including cover complete all as specified and directed.

M & L for 16 mm thick and 600 mm x 600 mm size mineral fibre false ceiling system of pattern as required at site and model as approved by GE in writting including grid system using hot dipped galvanised steel section, exposed surface with pre-powder coated capping, main runner and cross runner and to comprise main tee/runner 15 mm x 38 mm size (load carring capacity 14 kg/sqm) spaced at @ 1200 mm from c/c securely fixed to the structural soffit and flush fitting 1200 mm long cross tee/runner to be interlocked between main runners @ 600 mm centre to centre from 1200 mm x 600 mm module, cut sub cross tee/runner 600 mm require independent support. Wall angle of size 19 mm x 19 mm, secured to the periphery of the wall at 450 mm maximum from centres. The above grid is suspended at every 1200 mm centre to centre in both direction and starting from wall at the distance 350 mm from wall by using 3.50 mm dia aqualine wire with suitable fasterners and hook clip complete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including side,corner,door finishes complete all as specified and directed.

S & F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor of any thickness, description and in any position not otherwise described for complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in flooring /paving / plinth protection,including finishing even & smooth without using extra cement, complete all as specified and directed

M & L for 25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for 20 mm thick granite stone work (type and colour as approved) rubbed and polished, edges rounded in cooking platforms, shelves and like jointing in CM (1:4) including pointing in white cement (1:2) using marble dust and with admixture of pigment to match the shade of granite over and including 15 mm thick screed bed in CM (1:6) including dismantling of old unserviceable stone slabs complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed.

M & L for 7 to 8 mm thick joint free nonskid ceramic tiles (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces, over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for 7 to 8 mm thick joint free glazed ceramic joint as on vertical surfaces of size 350 mm x 250 mm x 7 mm / 450 mm x 350 mm of approved colour and print / design set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

m/s sahu enterprises

Khalil Ahmed and Sons

M/s DKS Engineering Works

M/S KALI CHARAN PANDEY AND CO.

SAXENA BANDHU

M.M.V. CONSTRUCTIONS