15th Finance Commission Tied 2024-2025 Chlorination

Amount

Supply ,Erection , Testing and Commissioning of liquid bassed Chlorine Dosing System for Water Supply under following specifications. A.) PREPATION TANK & STORAGE TANK TYPE: 500 LITRES, Fiber Reinforced Plastics SIZE:(ID X HEIGHT X THK)mm STD LIFTING HOOK "SUITABLE LIFTING DEVICE SHALL BE PROVIDED ON SKID." USABLE CAPACITY:PREPARATION & STORAGE 525 LTR LIQUID / SOLUTION TO BE HANDLED: CHLORINE MATERIAL OF CONSTRUCTION: PP/LLDPE DESIGN PRESSURE ATM+FULL OF LIQUID TESTING: LEAKAGE TEST: WATER FILL UP QUANTITY: 01 NOS. B.) DOSING PUMP/TRANSFER PUMP MAKE : ROTOMACK/ACL/ROTOPUMP MODEL: MMDP-1 TYPE: MEACHANICAL DIAPHRAGM TYPE OFFERED CAPACITY 0-75 LPH SPM/RATIO 100/15:1 DIAPHRAGM PTFE FLOW CONTROL MANUALLY TURN DOWN RATIO 10:1 PUMP STANDARD MFG STD EFFICIENCY/ACCURACY 97% / +_3% SUCTION FLANGED TYPE DISCHARGE PRESSURE 4.0 KG/CM2 PRV SET PRESSURE 5.0 KG/CM2 CONNECTION SUCTION 15 NB CONNECTION DISCHARGE 15 NB MATERIAL OF WETTED PARTS PP QTY. 02 NOS. [ 1W + 1S ]

"C.) " PUMP DRIVE MOTOR MAKE: CGL/BBL TYPE: "SQUIRREL CAGE INDUCTION MOTOR IEC zone- IE 2" SUPPLY SYSTEM: 3 PH. INDUCTION, AC, 415V ± 10%, 50 HZ+_5% MOUNTING/DEG PROTECTION: B 3 (FOOT MOUNTED) / IP 55 NO OF POLES/ RPM: 4 POLES /1440 RPM INSULATION CLASS / TEMP RISE: CLASS F / LIMITED TO CLASS B METHOED OF COOLING: TEFC APPLICABLE STANDARDS: IS 325 RATING: 0.5 HP MOTOR FRAME TYPE: AS PER DIN / IEC 34-7 DUTY CLASS: S1: 100% CONTINUOUS OPERATION NOISE LEVEL(LESS THAN): 85 DB (A) AT A DISTANCE OF 1 MTR. QTY: 02 NOS. D.) MOTOR -PUMP SHAFT COUPLING MAKE: RATHI COUPLINGS/EQUIVALENT TYPE: LOVE JOY/SUITABLE FLEXIBLE COUPLING QTY: 01 NOS. E) FITTING AS PER ANSI 16.11 B MAKE : REPUTED & APPOVED ISO-9000 CERTIFIED SUPPLIER TYPE: 15 NB (SW) MATERIAL OF CONSTRUCTION : PP

F) FLANGES AS PER ANSI 16.5 B SIZE: 15 NB SWRF # 150 MATERIAL OF CONSTRUCTION: PP/UPVC INLET TERMINAL FLANGES/TANK FLANGES 15 NB SWRF # 150 OUTLET TERMINAL FLANGES/COMPANION FLANGES 15 NB SWRF # 150 QTY AT ACTUAL G) PULSATION DAMPNER TYPE VOLUME BOTTLE TYPE CAPACITY 1.5 LIT MOC PP/UPVC QTY 01 NOS H.) PRESSURE GAUGE WITH ISOLATION VALVE MAKE WAREE / WIKA/STD TYPE BOURDON SENSING TYPE MOUNTING DIRECT BOTTOM DIAL SIZE 100 MM MOC SS ACCURACY 0.02 RANGE 0 –14 KG/CM2 QTY 01 NO I.) NRV TYPE LIFT CHECK TYPE END CONNECTION 15 NB SW MOC PP/UPVC QTY 01 NOS

J.) PRV TYPE SPRING LOADED CONNECTION 15NB 300# PRV SET PRESSURE 5.0 KG/CM2 MOC PP/UPVC QTY 01 NOS K.) STRAINER FLITRATION RATING 40 MESH SIZE 15 NB MOC PP/UPVC QTY 01 NO L.) LEVEL GUAGE 0.00 TYPE TRANSPARENT TUBULAR TYPE MOC PP END CONNECTION 15 NB 150# FLANGED QTY 1 NOS M.) BALL VALVE MAKE: ASTRAL/FINOLEX/STD TYPE: BALL VALVE FOR SUCTION & DISCHARGE MATERIAL OF CONSTRUCTION: PP/UPVC END CONNECTION: SW SIZE 15 NB SW # 150 QTY AT ACTUAL

N.) PIPING WITHIN THE SKID 0.00 SIZE / RATING OF PIPE: 15 NB SEAMLESS SCH40/80 SUCTION MOC: PP/UPVC DISCHARGE MOC: PP/UPVC O.) GASKETS MATERIAL OF CONSTRUCTION: SPIRAL WOUND GASKET CS OUTER INNER SS QTY AT ACTUAL P.) FASTNERS 0.00 MAKE STANDARD MATERIAL OF CONSTRUCTION: MS GALVANISED QTY AT ACTUAL Q.) SKID/BASE FRAME BASE FRAME A COMMON BASE FRAME FOR TANK, PUMP ANDLIFTING LUGS, SUPPORTS SHALL BE PROVIDED 0.00 TO AND ABOVE SCOPE OF SUPPLY STOOL FOR PUMP PUMP SHALL REST NOT LESS THEN 300MM FOUNDATION BOLT M-12 X 150 MM MATERIAL OF CONSTRUCTION CS ( IS : 2062 ) PRIMER/ZINC RICH EPOXY FINISH/HIGHBUILT EPOXY FRAME SHALL BE PAINTED WITH 2 COATS OF EPOXY PRIMER AND 2 COATS OF EPOXY PAINT, AGITATOR WITH CONTRAL PANEL SET 0.5 Hp - 01 No Characteristics On-Off MaxTorque(NM) 50NM TravelTime(sec)for90° 19seconds MotorPower(watt) 6watt RatedCurrent(amp.) 0.15amp. Lock(amp.) 0.22amp. PositiononPowerFailure StayPut/FailLast Featuresandfunctions 0.00 ActuatorManufacturingStd. IEC/EN15714-2

Motor ReversibleInductionmotorAccordingtoIEC60034-1 Duty S2-30min MethodofStarting DirectonLineStarting MainVoltage&Frequency 220VAC,50/60Hz Tolerance–Appliesforrated performance, duty cycle & speed is not guaranteed VoltageTolerance+/-10%FrequencyTolerance+/-5% InsulationClass ClassFwithtemperatureriserestrictedtoclassB Motorprotection Built-inthermalprotection Manualoperation Manualdriveforsetting&emergencyoperation,WrenchType Self-locking • "ProvidedbyHeavy-dutymetalgearsdrive, noadditionalbrake required." Electricalconnection Terminalconnection Threads for cable entries / Threads2*PG13.5\ cable gland Gland 1*PG13.5 Mechanicalswitchcompartment 0.00 Limitswitching Open/Close,(2)Operational&(2)Auxiliary Switchrating SPDT,16A1/2HP125/250VAC,0.6A125VDC,0.3A 250VDC; Switchmaterials Silver(AG) (Optional) Positionfeedbacksignal,analogue feedback Potentiometer(ohm)or4–20mA(electronicpositiontransmitter)2 wire system Mechanicalpositionindication Continuouspositionindicator,adjustableindicatordiscwitharrow. SpaceHeater Anti-condensation5-10W(Standard)30- 45 W (Low-Temp optional on request)

T. Features&serviceconditions 0.00 ValveAttachmentmounting AccordingtoENISO5210 BodyMaterial AluminumAlloy Enclosureprotection Weather proof Ambient temperature -10ºCto+55ºC ColourCode WhiteAluminumRAL-9006 Coating Doublelayerpowdercoating/DryPowderCoated Lifetime DesignlifeaccordingtoEN15714-2 U. ApplicableDirectives 0.00 ECMachinery- Accordingto2006/42/EC LowVoltage- Accordingto2006/95/EC EMC- Accordingto2004/105/EEC

Hariharan R Rudra Infra Tech (BID ID -1264043)