Annual Maintenance Contract for Repair and Maintenance of Fire Fighting system at HMRBPL and PHDPL stations

Amount

Assistance in carrying out maintenance and inspection of fire extinguishers on monthly basis including pastings/ marking of maintenance date, cleaning, replacement of defective parts ( IOCL supplied), measuring weight and charges for labour, including oiling, greasing, testing as per direction of EIC inclusive of all tools &tackles, consumables, transportation, labour charges etc and measuring instruments for the same as directed by the EIC/ Site engineer and submitting the reports of the inspection as per HSE manual format (payment of spares not supplied by IOCL shall be made as per respective items)

For 10/9 KG. CAPACITY DCP extinguisher

For 75/70/50 KG. CAPACITY DCP extinguisher

For 4.5/5 KG. CAPACITY DCP extinguisher

For 2 KG. CAPACITY CO2 extinguisher

For 4.5 KG. CAPACITY CO2 extinguisher

For 6.8 KG. CAPACITY CO2 extinguisher

For 2 KG CAPACITY Clean agent extinguisher

Monthly: Checking, inspection, maintenance, greasing, cleaning, oiling etc. of Double headed hydrant valves alongwith all tools, tackles, manpower, material etc.

Checking, inspection, servicing, maintenance, greasing, cleaning, oiling, replacement of disc washer, blank cap if any including complete overhauling etc. of Double headed hydrant valves alongwith all tools, tackles, manpower, material etc. Payment for disc washer, coupling washer & blank cap shall be made separately.

Supplying and fitting of Hydrant Disc Washer as per directions of Engineer-in-Charge

Supplying and fitting of Fire Hydrant/ Fire Hose coupling washer

Supply and fitting of blank cap (as per IS 5290 , red colour with GI chain) suitable for 63 mm hydrant outlet as per direction of EIC

Supplying & fitting spindle assembly (Gunmetal)

Monthly maintenance of 750 GPM Monitors: Oiling & greasing through grease nipple provided on bearing, worm wheel and worm shaft, cleaning, performance checking for complete vertical and horizontal movement, nozzle movement, water throw, foam suction, ensuring proper tightning of flanges, clearing the debris around the nozzle etc as per approved procedure including tools & tackles, report submission complete as per direction of Site Engineer / EIC. Water resistant low friction synthetic grease, grease gun and all other consumable etc shall be arranged by vendor. After testing, AFFF jerry-can must be positioned and replinished near monitor including shifting, transportation etc.

Assistance in hydrotesting of fire fighting delivery hose of dia 63 mm on half-yearly basis (Type A and B ) by making arrangement of hydraulic pump, blind, shifting from plant area, building, drying etc as perapproved procedure along with CISF including tools & tackles, reportsubmission complete as per direction of Site Engineer / EIC.

Supply and installation of Clear PVC, Spiral wound hose (pick-up tube) of length 3 m length and dia 40 mm with SS jublee clamp for tightning suitable for existing connectors of 750 GPM Monitor

Supply and installation of SS strainer of dia 30mm with SS jublee clamp suitable for 40 mm pick up tube of 750 GPM Monitor

Supply and installation of SS drain valve size 15 mm/other Suitable for 750 GPM Monitor.

Hydrtest of DCP extinguishers, making out by pouring outside the cylinder, internal /external cleaning and repairingof various accessories such as cap assembly , discharge hose pipes, pressure gauge etc. by supplyling manpower gasket washer etc. Cylinder surface preparation / and application of one coat of red oxide primer bfollowing by two coat of synthetic enamel paints (fire red) ( Hydrotest proceudre will be same as briefed in IS 2190: 2010 )

For 50/70/75 KG. CAPACITY DCP extinguisher

For 10/9/5 KG. CAPACITY DCP extinguisher

Hydrostatic testing, inspection of safety valve and refilling of high pressure CO2 cylinder through CCE approved party and charging up to required pressure including taking delivery of the cylinder from the station and returning the same inclusive of all labour material ,transporation and all the other incidental expenses. The cylinder is to be returned back to the station within two week from the date of receiving from the station.

For 6.8 KG. CAPACITY CO2 extinguisher

For 4.5 KG. CAPACITY CO2 extinguisher

For 2 KG. CAPACITY CO2 extinguisher

Aluminium Painting & Refilling of CO2 gas in cartridges for using in DCP extinguishers including all labour, transportation etc. complete as per specification and direction of EIC/Site-Engineer. (CO2 CARTRIDGE OF 120/ 200g MS)

REPLACEMENT OF DEFECTIVE PARTS BY SUPPLY AND FITTING OF ITEMS FOR 5 KG DCP EXTINGUISHER

Discharge hose with squeeze grip, hose should not burst or show leakage before 50 Kgf/cm2.

Safety clip (metal) with nylon thread

DCP extinguisher cap washer

Inner container

Cap Assembly Gun Metal

Discharge tube washer

REPLACEMENT OF DEFECTIVE PARTS BY SUPPLY AND FITTING OF ITEMS FOR 9 KG/10 KG DCP EXTINGUISHER

Discharge hose with squeeze grip, hose should not burst or show leakage before 50 Kgf/cm2.

Safety clip (metal) with nylon thread

DCP extinguisher cap washer

Inner container

Cap Assembly Gun Metal

Discharge tube washer

REPLACEMENT OF DEFECTIVE PARTS BY SUPPLY AND FITTING OF ITEMS 50/70/75KG DCP EXTINGUISHER

Discharge hose with clamps (6.5 mtr length). Hose should not burst or show leakage before a pressure of 50 Kgf/cm2.

Brass connection tube between CO2 cylinder & DCP cylinder with leather washer.

Cap washer

Trolley wheel set with required fittings

REPLACEMENT OF DEFECTIVE PARTS BY SUPPLY AND FITTING OF ITEMS FOR FOR CO2 EXTINGUISHERS

HDPE discharge horn for 2 Kg/4.5 kg CO2 extinguisher along with bend pipe fitting complete in all respect as per direction of EIC.

HDPE discharge horn for 6.8 Kg capacity CO2 extinguishers with fittings as per direction of EIC.

High pressure discharge hose for 4.5 Kg/ 6.8 Kg Co2 extinguisher with fittings as per direction of EIC.

Trolley wheel set for 6.8 Kg CO2 extinguisher along with handle complete with fittings as per direction of EIC.

Handle for 2 Kg /4.5 Kg CO2 extinguisher

Safety pin with nylon string for CO2 extinguisher (For all sizes)

Supply & fitting plastic safety pin holder in CO2 extinguisher.

Supply & fitting of rubber beeding of the complete one hose box (both doors) as per direction of EIC including removing of worn out rubber beeding, labour charges, tools & tackles etc. complete in all respect

Supply & fitting of glass of hose box (Both side of the box) inclusive of rubber beading wherever required complete in all respect inclusive of material, labour, consumables etc. (Rate inclusive of both glasses & rubber beading)

Supply and Fitting of new wind sock (fluoroscent in two colour), removing of old wind sock made out of synthetic cloth in flood light tower, buildings, upto height of 10 M, as per direction of site engineer/ EIC. Approval to be granted for wind sock prior to supply.

Erection and supply of stand post of wind sock (up to height 15 mtr.) in place of damaged stand post as per specification of IOC and EIC including tools and tackles, labour chargesets complete in all respect.

Maintenance/checking/Refilling of Fire buckets with stand supplied by contractor & canopy asper the direction and satisfaction of Site engg/ EIC.

Refilling of DCP Ext. 10/09/05 Kg. Cap. DCP to be provided by IOC.

Refilling of DCP Ext. 50/70/75 Kg. Cap.DCP to be provided by IOC.

Refilling & Hydrotesting of Breathing Apparatus set cylinders with dry compressed air up to a pressure of 300 bar as per OISD guidelines and as per the direction and satisfaction of Site engg/ EIC, inclusive of transporation handling charges,hydrtoesting from CCE approved party complete in all respect.

Replacement of broken glass broken of MCP ( Size 4.5"X 3.5") as per the direction and satisfaction of Site engg/ EIC.

Vishal Profin Pvt. ltd.