Construction of Main gate and Guard room for Mechanical and Hospital Engineering Department, Kashmir

Amount

Site Cleaning/Site prepration: The job includes dismantling of existing damaged guard room, part of existing boundary wall on both sides of gate etc. The site needs to be cleaned and prepared for an even base for construction of the main gate and Guard room adjacent ot Main Gate. The debris whatsoever shall be shifted and disberse off upto a lead of 50 Mtrs as per the directions of site Engineer.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 2.5'X3'X3'X 3Nos.

Providing and Laying of Stone Soling (Hand Packed) in trenches including ramming, dressing, etc including leads, lifts, carriage upto site etc. 2.5'X3'X6" X 03 Nos.

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 2.5'X3'X4" X 03 Nos.

CAST-IN-SITU Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 2.5'X3'X2.5' X 03 Nos. (4" above ground).

Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 2'X2.5'X12'ht X 02 Nos.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 5.22.1 Mild steel and medium tensile steel bars. i) ⌀16mm: 06 Nos X 15' X 02 Nos. ii)⌀12mm: 06 Nos X 15' X 02 Nos. iii) ⌀ 08mm: 19 Nos X 10' X 02 Nos. For underground: i) ⌀10mm : 4'X05 NosX 02 nos. + 3.5'X06 Nos X 02 Nos.

Providing and fittment of of Verticalcolumn for main gate by way of providing, cutting, welding and fixing of MS Channel ISMC 200. The job includes providing, cutting, welding of 4 sections, and fixing the same vertically in cement concrete block as per the direction of site Engineer. The job also includes Providing and welding/fixing of Holdfast and allied accesories for proper allignment of the main gate. The job also includes providing and fixing of 03 Nos of MS C-Class 100mm dia vetical posts of length 27 Feet each.The minimum thickness of the pipe be 5mm. All the fittments need to be painted with 2 coats of Red oxide primer and 2 coats of Paint matching with the colour of the gate. i) ISMC 200 = 14' x 04 Nos = 56 Rft i.e17.07 Rmtr @ 24.3 Kg/mtr = 414.80 Kgs ii) MS Plate welded on bottom, 18" X 24" X 8mm thick = 17.5 Kgs iii) MS Plate welded on top 10"X18"X8mm thick X 02 Nos. = 14.6 iv) MS Clete 8mm thick = 3.40 Kgs v)25mmX02 inches Long MS NutBolt=01 kgs vi) 100mm dia, MS C-Class Pipe,05mm thick,27 Feet long:96.5Kgs ii) Hold Fast (03 Per Door Panel) : 15 Kgs

Centering and shuttering including strutting, propping etc. and removal of form work for: Columns, piers, abutments, pillars, posts and struts. i) 9'X 12' X02 Nos.

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) i) 9'X 12' X02 Nos.

Designer Wall TILES (Devri Stone) Providing and fixing Ist quality Designer Wall tiles, fine chizilled, with Devri stone conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. i) 9'X 12' X02 Nos.

Fabrication providing and fitting of Stainless Steel (304) main gate of size 18ftx 8ft--double panel and 9ftx8ft single panel with following details:

SS Sheet304 grade of 16gauge(1.59mm)-216Sft

SS Rectangular Pipe (3"x1.5")- (102 Rft)

SS Square Pipe (1")- (324 Rft)

Designed panel sheet using Laser Cutting in SS 304 of size 27 Sft.

Hinges, Aldrops, Handles & and other allied fittings.

SS Sheet 304 grade of 18 gauge (1.27 mm)-93 Sft (Casing for MS Channel)

Fabrication providing and fitting of Departmental Sign board of size 31 x 4 ft. The writings of symbols, numbers, letters and pictures shall be with following details:

Providing and fitting of High pressure laminate (HPL) (31'X4') sheet of thickness (6 mm), the colour shall be decided by the Engineer-in-Charge

Providing and fitting of MS Square Pipe of size 40x40x2.6mm (4'X11+5'X10+31'X2).

Providing and fitting of Aluminium Composite Pannel (ACP) sheet of thickness (3 mm with 0.2mm coil), the colour shall be decided by the Engineer-in-Charge. (31'X4' + 3"X70')

Providing and fittment of Granite Sheet of 20mm over the column.

Providing and fittment of Innaugration Stone/name plate. The job includes providing of Designer Granite plate of approximate size 2.5' X 2' with engraved golden writing as per directions of site Engineer. The fittment should give a fine finishing and clear bright engraving work.

Fabrication and fitting of alphabets made out of SS 304 with Goden shade over 010 grade acrylic fixed on HPL sheets. The words(acrylic and Steel words) shall be provide with background lighting arrangement. The design & style of the alphabets shall be approved by the Engineer in-charge. The size for alphabets shall be as below:

Alphabet size: 12" Height x 2" depth, width as per size of board and design/drawing.

Alphabet size: 6" Height x 2" depth, width as per size of board and design/Drawing.

Providing and ftting of 2.5 sqmm multistrand copper wire including PVC conduit

Construction of guard Room ( 12x10) Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil i) 36'X2.5'X2'

Providing and Laying of Stone Soling (Hand Packed) in trenches including ramming, dressing, etc inclusing leads, lifts, carriage upto site etc.complete work. i)36'X2'X6" ii) 8' X 6' X 2.5' iii) 8'x2'x6" (staircase and varenda)

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering With: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) i) 36'X2'X4" ii) 8'x2'x4"

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) 36' X 2' X 50"

DPC 4" thick :CAST-IN-SITU Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 41'X18"X4"

Flooring: CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (10.5' X 8.5' X 4") + (4' X 6' X 4" - Staircase)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement lime mortar 1:1:6 ( 1 cement : 1 lime putty : 6fine sand) (41' X 9'+ 12'x2.5)'x9"-(6'x4'+2'x3'+7'x2.5')x9"(Deductions on a/c of Doors and windows)

Doors and Windows: Providing and fittment of UPVC double Glaze argon filled doors, windows with mosquito net, clerestory windows and other frames, wrough framed and fixed in Position with hold fast lugs or with dash fasteners of required dia and length. 6'x4'+2'x3'+7'x2.5'

Slab 6" thick :CAST-IN-SITU Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) i) 14' X 10' X 6"

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars i) ⌀12mm- (27Nox10'forSlab) (44'X3Nofor DPC) ii)⌀10mm -(21 Nox14' for Slab) + (18" X 18 No for DPC) iii) ⌀12mm- 16'X 02 Nos (for Lintels)

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms

Cost on account of fittment of electrical wirings, switches etc as per the directions of concerned Engineer. The job includes providing, fittment of following items/electrical fittings:

Sevice line-4sqmm copper from nearest available LT Pole/source.

P & F of 06 Way MCB Box with ISI mark.

P&F of MCB's of 32AMPS, 16AMPS and 08 AMPS capacity…As per the site requirement and directions of site Engineer.

P&F of 2.5SQM copper wire, ISI marked, for heating circuit.

P&F of 1.5 SQM copper wire, ISI marked, for lighting circuit.

P&F of concealed roof lights 10-12 Watts.

P&F of Condute for heating and lighting pnts.

P&F of 16 Amps SS combine switches and socket, ISI marked with modular switch board of required size.

P&F of 6 Amps switches and socket, ISI marked with modular switch board of required size.

P&F of 12" Sweep Ceiling fan, ISI marked, along with fan regulator.

Providing and fittment of 50Watts waterproof exterior LED flood lights. The job includes providing and fittment of 50 Watts flood lights along with angular erection rod/support, duly welded to the sign board as per the directions of Engineer in-charge. All other accesories needed to complete the job like MCB etc are included in the job.

Carriage charges for sand and aggregate upto a lead of 20 Kms (approx) as per JKSOR-carriage of matyerial (code 1.1.5)

Carriage charges for Bricks upto a lead of 20 Kms (approx) as per JKSOR-carriage of matyerial (code 1.1.8)

SHEIKH IRSHAD AHMAD (BID ID -2191275)

S S CONSTRUCTIONS (BID ID -2162757)

M/S ABDULLAH IMPERIALS (BID ID -2193771)