Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹42.6 L+₹3.0 L (7.52%)Rejected-AOC 4 1 70 1 ROAD NO 11 SNEHAPURI NACHARAM HYDERABAD 500 076 | HYDERABAD | MEDCHAL MALKAJGIRI | TELANGANA | 500076 | L2 | Rejected-AOC rejected | |
| 3 | L3₹43.0 L+₹3.4 L (8.58%)Rejected-AOC | L3 | Rejected-AOC rejected | |
| 4 | L4₹43.5 L+₹3.9 L (9.90%)Rejected-AOC CHENNAI | L4 | Rejected-AOC rejected |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
2 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Tirunelveli
Garrison Engineer Naval Post Base Vijayanarayanam Tirunelveli -627119
REPAIR/MAINTENANCE TO ECHS BUILDING AT PALAYAMKOTTAI AND REPAIRS TO CERTAIN B/R WORKS AT PARUNDU UNDER GE TIRUNELVELI
2023_MES_621791_2
GE/TVL/8302/E8 of 2023-24
Open Tender
Civil Works
Item Rate
180 days
Ramnad
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Tirunelveli
₹86,000
Yes
26 Feb 2024
7 Dec 2023
4 Jan 2024
7 Dec 2023
2 Jan 2024
18 Dec 2023
Amount
Taking down cement plaster on brick or stone wall including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Rendering 15mm thick in (CM 1:4)on fair faces of brick work or concrete surfaces and to be finished even and smooth (without using extra lime or cement) including WPC @ 3% weight of cement complete all as specified and as directed Note :- WPC shall be measured and paid separately.
Supply only integral water proofing compound
Rendering 15mm thick in (CM 1:6)on fair faces of brick work or concrete surfaces and to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed
Material and labour preparing new plastered surfaces of wall, and applying two coats of oil bound distemper over a coat of alkaline resistant primer over a coat of 3mm wall care putty complete all as specified and as directed.
Material and labour Preparation of new plastered surface on wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed
Material and labour Complete removal of existing treatment including preparation of wall surfaces and applying two coats of oil bound distemper over a coat of alkaline resistant primer over a coat of 3mm wall care putty complete all as specified and as directed
Material and labour rendering 10 mm thick Cement plaster in cm 1:3 as in ceiling ,surfaces finished even & Smooth (without using extra cement) complete all as specified and as directed
Material and labour for preparing new plastered wall surfaces and applying three coat of white wash complete all as specified and as directed
Material and labour for preparation of old plastered or unplastered surfaces of ceiling and apply two coat of white wash complete all as specified and as directed
Material and labour Complete removal of existing treatment including preparation of wall surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed
Supply and fixing Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
Material and labour preparation of newly surface of iron/steel with two coat synthetic enamel paint over a coat of red oxide primer etc complete and all as specified and as directed
Demolition of reinforced cement concrete as in beams , columns and footings etc complete all as specified and as directed
Material and labour Pre cast cement concrete type B-1 (using 20mm graded aggregate) as in cover slab and similar nature of works including necessary form works complete all as specified and as directed
Material and labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
All as per item No.16 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
Material and labour for repair to existing Anodised aluminum door shutters of any size including necessary petty repair works, complete all as specified and as directed
Supply and fixing in repair double action floor spring hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty, complete all as specified and as directed
Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each etc complete all as specified and as directed.
Taking down shutters of any description but size exc 1 Sqm and not exceeding 2.0 Sqm each complete all as specified and as directed.
Supply and fixing locally fabricated plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and as directed
Supply and fixing solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, Supply and fixing in opening as per specification & drawing etc complete all as specified and as directed
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail & bottom rail on either side and as gap insert for top rail bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement Supply and fixing in the frame at site as per specification & drawing etc complete all as specified and as directed
Supply and fixing aluminium alloy anodised and fixed in 100mm complete all as specified and as directed
Supply and fixing Mild steel cold rolled 125mm Butt hinges, heavy weight, complete all as specified and as directed
Supply and fixing aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed
Supply and fixing aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed
Supply and fixing 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
Material and labour preparation of newly wooden based surface and applying two coat synthetic enamel paint over a coat of pink primer etc complete and all as specified and as directed
Material and labour preparation of old wooden based surface and applying two coat synthetic enamel paint complete and all as specified and as directed
Supply and fixing in repair 10 Ltrs capacity PVC low level flushing cistern, ISI marked of make specified with inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.
Supply and fixing in repairs flush pipe of Polyethylene of low or high density or PVC 32mm dia for Low level cistern, basin & sink complete all as specified and as directed.
Supply and fixing in repair PVC (SWR) floor trap, plain with grating 75mm dia including jointing with solvent cement complete all as specified and as directed.
Supply and fixing in repair PTMT Shelf with Soap tray of minimum wt 300 gm fixed in wall with brass chromium plated screws in wooden/plastic cleats complete all as specified and as directed
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed.
Material and labour non skid ceramic tiles 7 to 8mm thick joint free (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed in CM 1 :4 etc complete all as specified and as directed
Material and labour for joint free Glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed
Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
Taking down shutters of size exceeding 1.5 sqm and not exceeding 3.0 Sqm including fixing X Ray lead sheet 1 to 5 mm thick to the shutter with necessary screws/nails and fixing arrangements , 5 Nos of 150mm heavy duty hinges, 1 Nos of Hydraulic door closer having suitable capacity to close the door automatically and 2 Nos of heavy duty door handles and refixing shutter in the same opening including necessary repairs complete all as specified and as directed.
Dismantling boarding's of any description fixed in any position with screws complete all as specified and as directed
Material and labour for pre-laminated particle board 18mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
Supply and fixing continuous (piano) hinges, 30 mm width of flap when open, mild steel, bright finish or electrogalvanised complete all as specified and directed.
Supply and Fixing of stainless steel Handle fancy type 100 mm size complete all as specified and directed.
Supply & fixing stainless steel hinge of size 65 mm self closing Italian patter suitable for cabinet and shelves opening / closing operation (fancy type) complete all as specified and directed
Material and labour for PVC edge lipping, 3/4mm thick fixed with nails for 18/19 mm thick pre-laminated particle board & shutters & etc, complete all as specified and as directed.
Supply & Fixing of Magnet of suitable size fixed for cabin leafs, drawers etc complete all as specified and directed Make : Royal or equivalent
Material and labour for second class hard wood plain fillets, square in section, clean sawn, secured with screws exc 13 & n. Exc 25 sq. cm complete all as specified and as directed.
Material and labour for Cutting holes in brick walls consisting of cement mortar for inserting hold fast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc half brick thick and not exc one brick thick complete all as specified and directed.
Supply and fixing GI Tubes 40mm dia medium grade with all fittings and fixed complete to wall or ceiling complete all as specified and directed.
Excavation in trenches n.exc.1.5 metre wide and n.exc 1.5 metre depth and getting out in soft/loose soil as in foundation complete all as specified and as directed.
Returning filling in trenches including spreading levelling watering and well ramming in layers not exc.25 cms in soil complete all as specified and as directed.
Removing excavated material / soil to a distance n.exc 50m away and depositing where as directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed.
Demolition of cement concrete in ground floor and pavings not exc 15 cm thick below or above GL complete all as specified and as directed.
Demolition and breaking up drain pipe salt glazed or AC or reinforced concrete and set in cement mortar 110/100mm dia complete all as specified and directed.
Supply and fix 200mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.
Material and Labour for PCC 1:3:6, type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm dia pipe complete all as specified and as directed.
Material and labour for PCC 1;3:6 type C-2 using 40mm graded aggregate as in surface channel and drains complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins arches, pillars etc all as specified and as directed.
Material and labour for rendering 15mm thick in (CM 1:4) with WPC on fair faces of brick work or concrete surfaces and to be finished fair and even complete all as specified and as directed. Note: WPC shall be measured paid separately.
Material and labour for rendering 10mm thick in (CM 1:6)on fair faces of brick work or concrete surfaces and to be finished fair and even complete all as specified and as directed.
Material and labour rendering 5mm thick Cement plaster in cm 1:3 as in ceiling , surfaces finished even & Smooth (without using extra cement) complete all as specified and as directed.
Material and labour for preparing newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and as directed.
Material and labour for Preparation of old painted surfaces by washing, rubbing, brooming down or steel wire brushing or scraping down and applying one coat of White wash on ceiling complete all as specified and as directed.
Material and labour Preparation of old painted surfaces of wall and applying a coat of Oil bound distemper complete all as specified and as directed.
Material and labour preparation for complete removal of old painting and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over in camouflage pattern on walls complete all as specified and as directed.
Material and labour for Preparation of old painted surfaces by washing, rubbing, brooming down or steel wire brushing or scrapping down and applying one coat of cement base paint on walls complete all as specified and as directed.
Material and labour preparation of old decorated wooden surfaces of any description over 10cm in width of girth and applying one coat on synthetic enamel paint complete all as specified and as directed.
Material and labour preparation of old painted steel surfaces over 10 cm in width of girth and applying one coat on synthetic enamel paint complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Supply and fixing Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe 410 -W (GdeE- 250) quality A complete all as specified and as directed.
Material and labour Rubber sheet 2.5mm thk with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive of 3.5mm thick complete all as specified and as directed.
Supply and fixing angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths) of grade Fe 410 -W (GdeE- 250) quality A complete all as specified and as directed.
Supply and fixing Rolled sections as in main and cross beams, pole, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde-E-250) complete all as specified and as directed.
Material and labour for roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each and removing to or from stores etc complete all as specified and as directed.
Supply and fixing SS butt hinges 100mm long fixed complete all as specified and as directed.
Supply and fixing aluminum anodized barrel tower bolts of extruded section & fixed 200 mm long etc complete all as specified and as directed.
Supply and fixing aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed
Supply and fixing aluminum cast type sliding bolt 300 mm size including fixing bolt and sliding bolt, fixing plate etc complete all as specified and as directed
Supply and fixing factory made uPVC white colour Casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately)
Supply & fix 4.8 mm thick, sheet glass, ordinary quality and glazing in square in exc 0.5 sq.m in each pane etc complete all as specified and as directed
Material and Labour Non skid ceramic tile 7-8mm thick area exceeding 0.18 Sqm and not exceeding 0.38 Sqm size (Square or rectangular)colour tiles in floor etc, laid over and including Screed bed or bedding layer 15mm thick in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match with as in floors complete all as specified and directed.
Material and labour Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 in floors etc complete all as specified and as directed.
Material and labour Machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Material and labour Glazed ceramic tiles exc 350x250x7mm / 450x350x7mm thick coloured tiles in vertical surfaces etc set and jointed in neat cement slurry over 10mm thk 1:4 CM backing coat and pointed in coloured cement to match complete all as specified and directed.
Material and labour for brick work using sub class B bricks straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.
Supply and fixing in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples all as specified and as directed.
Material and labour for greasing and servicing and necessary repair including welding to steel rolling shutters gear/ manual operated type complete all as specified and as directed.
Dismantling of fencing wire mesh of any type n exe 4kg/sqm complete all as specified and as directed.
Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified and as directed.
Material and labour for plain cement concrete Type D-2 1:4:8 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.
Material and labour Cement concrete in foundations, filling and mass concrete, type B2 1:2:4 (40mm graded aggregate) complete all as specified and as directed.
Supply and fix mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Supply and fixing for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long but n exc 10cm long and 16 to 20mm Diameter of neck complete all as specified and directed.
Supply only chain link MS galvanised fencing aperture size 50 mm and wire of 8 swg (4 mm), with line wire any size or type complete all as specified and directed.
Fixing only chain link fencing, including line wires any mesh, size and type to any type of standards, rails, straining bolts, etc incl provision of binding wire complete all as specified and directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Naintial or similar pattern roof coverings complete all as specified and as directed.
Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.
Supply and fixing prepainted galvalume aluminium zinc coating GI based plain sheet 0.5mm thk of an colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft soil complete all as specified and as directed.
Material and labour for Hardcore using broken stone or boulders n exc 63 mm deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
Material and labour 75mm thk Cement concrete Type D2 1:4:8 (40 mm graded aggregate) in footpath/Hard standing complete all as specified and directed.
Providing and laying Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade withy grey cement and no pigment complete all as specified and as directed.
Material and labour sand filling under floors or in foundation incl watering and consolidation etc complete all as specified and as directed
Material and labour complete removal of old wall /ceiling surfaces of RCC Water storage tank having height more than 10 Mtr ,preparing the surface and applying two coat of weather proof exterior acrylic paint over a coat of primer in camouflage pattern including necessary scaffolding and safety equipments and writing in radium sticker as SAVE WATER SAVE LIFE complete all as specified and directed. Note: The quoted rate is deemed to be inclusive of cost of scaffolding. No extra payment shall be claimed by the contractor on account of using scaffolding.
Material and labour for Cleaning the internal and external surface of UG sump / Static water tank of capacity up to 10000 gallons by scrapping/brushing and removing all silt dust etc from walls, floors, clean with water and bleaching powder and applying one coat of lime wash to all internal surfaces and complete removal of sand,dust,dirt and other unwanted coatings from the exterior wall surfaces by suitable means and painting with weather proof paint to complete side wall and top surface of sump including writing particulars such as capacity of sump, date of cleaning and due date of cleaning etc using white paint on black back ground with height of letter to match with the existing size including painting to incoming and outgoing pipe lines and valves/valve chambers with approved colour (Pipe line exposed above surface) of any size complete all as directed.
Material and labour for Cleaning the internal and external surface of Shallow well of size 4.50 mtr dia. and 6 mtr depth by scrapping/brushing and removing all silt dust etc from walls, floors, clean with water and bleaching powder and applying one coat of lime wash to all internal surfaces and complete removal of sand,dust,dirt and other unwanted coatings from the exterior wall surfaces by suitable means and painting with weather proof paint to complete side wall of shallow well including writing particulars such as depth of shallow well, date of cleaning and due date of cleaning etc using white paint on black back ground with height of letter to match with the existing size including painting to pipe lines and valves with approved colour (Pipe line exposed above surface) of any size complete all as directed.
Material and labour for Cleaning the internal and external surface of deep Open well of size 7-10 mtr dia. and 10-15 mtr depth by scrapping/brushing and removing all silt dust etc from walls, floors, clean with water and bleaching powder and applying one coat of lime wash to all internal surfaces and complete removal of sand,dust,dirt and other unwanted coatings from the exterior wall surfaces by suitable means and painting with weather proof to complete side wall of shallow well including writing particulars such as depth of shallow well, date of cleaning and due date of cleaning etc using white paint on black back ground with height of letter to match with the existing size including painting to pipe lines and valves with approved colour (Pipe line exposed above surface) of any size complete all as directed.
Material and labour for Cleaning the internal surfaces of Over Head Tank at 10-15 m height / staging by scrapping down/brushing and removing all silt dirt, algae etc from walls, floors, washing/ cleaning with water and applying one coat of white wash to all internal surfaces of walls and ceilings complete including writing particulars such as capacity of OH tank, date of cleaning and due date of cleaning etc using white paint on black back ground with height of letter to match with the existing size including painting to incoming and outgoing pipe lines and valves/valve chambers with approved colour (Pipe line exposed above surface) of any size complete all as directed all as directed by Engineer-in-charge for 100000 Litres capacity.
Material and labour for Cleaning the internal surfaces of Over Head Tank at 15 m height / staging by scrapping down/brushing and removing all silt dirt, algae etc from walls, floors, washing/ cleaning with water and applying one coat of white wash to all internal surfaces of walls and ceilings complete including writing particulars such as capacity of OH tank, date of cleaning and due date of cleaning etc using white paint on black back ground with height of letter to match with the existing size including painting to incoming and outgoing pipe lines and valves/valve chambers with approved colour (Pipe line exposed above surface) of any size complete all as directed all as directed by Engineer-in-charge for 15000 Ltr capacity.
Note For Item No-107 to 112 1. T & P for dewatering UG Sump / Static Tank has to be arranged by the contractor. Rate quoted is inclusive of material and labour required for dewatering. Nothing extra shall be paid separately. 2. All the operations should be executed by trained workers and technicians, properly dressed along with gum boots, safety harness to work as per the direction of Engineer in charge. Contractor shall bring suitable fittings to connect cleanout pipe and suitable length pipe using cleanout facility if available and operational without damaging water tank. Nothing extra shall be paid separately. Contractor shall be responsible for complete cleaning, suction, disposal activity and thereafter. Any damages to water tank during cleaning operation shall be repaired by the Contractor with no cost to MES. Contractor shall ensure and implement safe working conditions for his laborers during execution , all necessary safety measures and harness shall be used before taking-up work. Suitable lighting and ventilation should be provided by the contractor before cleaning of covered tanks. Agency shall be solitary responsible for the lapses in the safety during the work and allied compensations. Nothing extra shall be paid separately, etc. complete as per direction of Engineer In-charge. 3. Water required for cleaning, washing of OHT, well static water tank shall be arranged by the contractor from outside agency at his own cost. 4. The unit rate quoted by the tenderer shall be deemed to include for all the above said connected works and nothing extra is admissible in this regard.
Supply and fixing rotational moulded polyethylene water storage tanks 500 Ltrs capacity (White colour), three layer (cylindrical or vertical with closed top) hoisted and fixed in position, including dismantling the existing one and removing to MES store yard, including Dismantling water tanks complete all as specified and as directed.
Supply and fixing in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
Supply and fixing in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms) complete all as specified and directed
Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed for the following sizes:-
(a) 15 mm dia bore
(b) 20 mm dia bore
Supplying, fixing, jointing and testing galvanised Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed to wall or laid in floor complete all as specified and as directed for the following sizes:-
(a) 15 mm dia bore
(b) 20 mm dia bore
Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern) white, incl. P or S Trap , connection to drain and flushing pipe including seat cover for pedestal pan complete all as specified and as directed.
Supply and fixing in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphonic pipe, PVC flushing pipe of size 32mm dia complete all as specified and directed.
Supply and fixing in repair PVC connections 150 mm size with PTMT nuts of length 450mm etc complete all as specified and as directed
Supply and fixing in repair 15mm bore Stop valves, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed concealed type and fancy type, chromium plated complete all as specified and as directed.
Supply and fixing in repair 15mm bore fancy type chromium plated bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed
Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia ‘D’ type 60 Cm long between flanges alluminium anodised all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
Supply and fixing 75mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floor etc complete all as specified and as directed.
Supply and fixing 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floor/wall etc complete all as specified and as directed.
Supply and fixing 110mm PVC (SWR) vent cowl complete all as specified and as directed
Supply and fix in repair PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and as directed.
Supply and fixing in repair for soap container of PTMT fixed with and incl chromium plated brass screws and wooden/plastic cleat complete all as specified and as directed.
Material and labour for 75mm thick cement concrete type C-2, ( 1:3:6) (40 mm graded aggregate) as in plinth protection finished even and smooth without using extra cement etc complete all as specified and as directed.
Material and labour for PCC 1:2:4 type B-1, (20 mm graded aggregate) as in Coping/padding/DPC complete all as specified and as directed.
Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position in repairs complete in all respect as specified.
Supply and fixing in repair Vitreous China Urinal, Half stall type, including waste coupling PTMT of suitable size white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and as directed.
M & L for Complete removal existing roof treatment from roof slab including taking down existing cement mortar, cleaning of the rubbishes and disposal of the same to a distance n exc 250 m. complete all as specified and as directed.
Material and labour for screed bed or bedding layer of mortar 20 mm thick in CM 1:3 with water proofing compound @ 3% of weight of cement and brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and as directed.
Material and labour for providing APP based membrane roof treatment in layers with the following course of treatment from bottom to top :- (a) Applying bituminous primer @ 0.30 Lit/Sqm over plastered surfaces of roof slab including parapet wall. (b) APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torch application complete all as specified. Polymeric membrane shall be taken to a height of 45 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (c) Applying two coats of bituminous Aluminium paints on top of APP membrane surfaces @ rate of 0.10 Lit/Sqm for each coat. Note: (i) The work in respect of water proofing treatment shall be carried out only by authorized / approved applicator of the manufacturers / firms of APP membrane. The contractor shall produce the evidence in support of work carried out by the authorized applicator as approved by manufacturers / firms before claiming payment. (ii) Laying APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions. (iii) A minimum overlap of 100 mm and 75 mm should be made at the end and side of the polymeric membrane respectively and sealed overlaps and joints as per manufacturers instructions. (iv) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge With Semi perforated 12mm thick micro regular edged GRG false ceiling tiles.
Taking down carefully copper/aluminium point wiring (light, fan, socket and power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc.
Point wiring with two single core 1100 V grade FRLSH insulated unsheathed cables of size 1.5 Sq mm multi-stranded Copper conductor FRLSH drawn through and including rigid PVC conduit and conduit accessories including concealed wiring including breaking of walls and making good to disturbed surfaces in wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm FRLSH multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed light/ fan/ Bell/ etc.
All as per Item No. 143 above, but using one 3 pin 5 Amps switch socket combination on the independent board with other switches, with cables 1.5 Sqmm size.
All as per Item No. 143 above, but using one 3 pin 5 Amps switch socket combination on the same board with other switches, with cables 1.5 Sqmm size.
All as per Item No. 143 above, but using 2.5 sqmm FRLSH single core multi stranded copper conductor cable concealed and make good disturbed surfaces and 2.5 Sqmm FRLSH copper earth wire cable drawn through 20 mm dia PVC conduit including provision of conduit and conduit accessories for One 5 pin, 15 Amps Multi purpose switch socket combination on independent board.
Supply and Fix in repairs Switch Piano, flush type, Single Pole, 230 Volts, AC, one-way 5 Amps with ISI mark complete all as specified and directed.
Supply & Fix in repairs Switch socket outlet, multipurpose, flush type, 3/5 Pin,AC, 230 Volts, 5 Amps complete all as specified and directed.
Supply & Fix in repairs switch socket outlet, multipurpose, flush type, 5 in 1, 5 A/16 Amps, AC, 230 Volts, complete all as specified and directed.
Supply and fixing in repairs Bell push, AC, 230 V flush type single pole, 5 Amps complete all as specified and directed.
Supply and Fix in repairs DING DONG bell AC 240 V single pole 50 Hz and connecting up complete all as specified and directed.
Supply and fixing in repairs electronic type fan regulator rotary step 100 watts complete all as specified and directed.
Supply and Fix in repairs Ceiling rose 3 terminals, surface Bakelite 65 x 50mm complete all as specified and directed.
Supply and Fix in repairs Sheet metal enclosures for DBs single pole 8 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement complete all as specified and directed. Make: Indo Asian Cat No. 811889 or equivalent as specified in PS
Supply and Fix in repairs Sheet metal enclosures, double door, MCB DB, 4 way, TPN, AC 415 Volts complete all as specified and directed.
Material and labour for SPN enclosure with two pin and earth plug and socket with 240 volts 20 Amp SP MCB, complete all as specified .
Supply and Fix in repairs MCB TPN, AC 415 Volts 40/63 Amps 10KA, 50Hz 'C' curve complete all as specified and directed.
Supply and Fix in repairs MCB SPN, AC 240 Volts 32 Amps 10KA, 50Hz 'C' curve complete all as specified and directed.
Supply and Fix in repairs MCB SP 240 V, 6A to 32 Amps 10KA, 50Hz 'C' curve 10KA, 50Hz 'C' curve complete all as specified and directed.
Taking down carefully sub main wiring of any description including batten / PVC conduit pipe on surface and making good disturbed surfaces to match existing all as specified and as directed.
Material and labour sub main wiring with two single core 1100 V grade FRLSH conforming to IS 694 PVC insulated unsheathed cables 6 Sq mm multi stranded copper conductor drawn through and incl. non metallic PVC rigid conduit and conduit accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 6 sqmm copper wire earth continuity conductor etc including taking down old sub main wiring complete all as specified and directed by Engr-in-Charge. Note : Two runs of 6 sqmm cable with one run 6.0 sqmm with one run of PVC conduit shall be measured as one run for payment.
Material and labour sub main wiring with two single core 1100 V grade FRLSH conforming to IS 694 PVC insulated unsheathed cables 4.0 Sq mm multi stranded copper conductor drawn through and incl. dia non metallic PVC rigid conduit and conduit accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 4.0 sqmm copper wire earth continuity conductor etc including taking down old sub main wiring complete all as specified and directed by Engr-in-Charge. Note : Two runs of 4.0 sqmm cable with one run 4.0 sqmm with one run of PVC conduit shall be measured as one run.
Supply and fixing wall mounted LED 20 watts, batten type fitting for surface and pendant application, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver with connector block etc complete with all accessories internally pre wired and necessary mounting arrangements with PVC block and connection from ceiling rose to fitting complete including dismantling the existing unserviceable fitting, complete all as specified and as directed.
Supply and fix in repairs LED light fitting surface mounted type 2 feet x 10W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.
Supply and fix in repairs LED Security light fitting 15 W LED (1800 Lumen) complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary suitable clamps & bracket GI Tubing medium grade 1mtr long bend into shape complete all as specified and as directed.
Supply and fixing Recess mounting flat panel 36 Watt LED fitting 2x2 feet with flat panel to enhance the, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, complete incl removal of old unsv fitting all as directed by Engineer-in-charge.
Taking down carefully Light fitting any type for reuse at same place including keeping in safe custody upto refixing, including refixing light fitting in same position complete connecting from ceiling rose to fitting with 2 core copper flexible cable/conductor all as per specified and directed by Engr-in-Charge.
Taking down ceiling fan, Exhaust Fan sealing cable end, dismantling blades and removing fan and blades to store and refixing after greasing and cleaning and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Supply and fix on load change over switch 415 volts in sheet metal enclose 4 pole of capacity 100 Amps all as specified and directed. Make: L & T Cat No. CO11000OSOO or equivalent as specified in PS
Supply, laying LT UG cable, 1100 volts grade, XLPE insulated and sheathed, armoured, multistranded, heavy duty electric cable with aluminium conductor laid in trenches, ducts, on poles, walls, through pipes concealed in walls or fixed with clamps etc complete for 4 core 16 Sqmm including identification tags over on cable glands on both side terminations where necessary complete all as specified and directed by Engr-in-Charge.
Supply, laying LT UG cable, 1100 volts grade, XLPE insulated and sheathed, armoured, multistranded, heavy duty electric cable with aluminium conductor laid in trenches, ducts, on poles, walls, through pipes concealed in walls or fixed with clamps etc complete for 4 core 25 Sqmm including identification tags over on cable glands on both side terminations where necessary complete all as specified and directed by Engr-in-Charge.
Excavation in trenches not exc. 1.5 m wide and not exc.1.5 m deep for laying of cable, pipe and for erecting of steel tubular swaged pole etc, and getting out in hard/dense soil complete all as specified and directed.
Supply, spreading and compacting of approved riddled earth in cable ducts / trenches for cable cushion on both top and bottom of cable, including ramming as specified and directed by Engineer-in-Charge. (Note :- Punned thickness only will be measured)
Supply and lay burnt bricks for cable protection of sub class 'B' standard size in trenches complete all as specified and directed
Supply and fix in trenches/walls steel water tubing galvanised light grade 40 mm dia pipe and connection including fitting like Tee, Bend, Socket, Elbow, Short pieces connectors, plugs, for cable protection complete all as specified
Supply installation, commissioning and testing of factory made out door LT distribution panel board cubical type pedestal mounted CPRI approved fabricated out door of MS 3.15 mm thick and angle iron 50mm x 50mm x 6mm frame complete with copper bus bar 4 wire 3 phase 500 Amps capacity mounted on porcelain insulator suitably spaced in totally enclosed chamber size of PVC insulated and sheathed copper cable complete including powder coated painting both internally and externally with two coats of synthetic enamel grey paint over a coat of red oxide primer comprising of the following:-
(a) MCCB 4 Pole 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA. As O/going (01 Nos)
(b) MCB 4 Pole 63 Amp, 50 Hz, 415 V with rupturing capacity 10 KA. As O/going (02 Nos)
(c) MCB 4 Pole 32 Amp, 50 Hz, 415 V with rupturing capacity 10 KA. As O/going (02 Nos)
(d) LED Indicating lamp RYB - Set of 3.-01 Nos
(e) LED Multifunction meter with CT - 01 No
Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanized earth wire 4mm dia connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 metre, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I
SIRITEL SYSTEMS PRIVATE LIMITED
ARUVI CONSTRUCTION
VVM CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .