Spl repair to external plaster and connected works at bldg No P-09 and Provn of widening of road and connected works at CHQ area at Mil Stn Gaya

Amount

Demolition of Brickwork, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as spd.

M & L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as spd.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M & L coloured external ditigal ceramic tiles in vertical surfaces 600 x 300 x 10 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 as backing for tiles incl taking down cement plaster complete all as specified and as directed.

M & L Plain cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as spd and directed by EIC

M & L for mild steel TMT bars 10mm dia and over cut to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire not less than 0.9mm dia.

S & F for mild steel TMT bars 6mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length bent to shape as reqd. incluing cranking, bending and binding with MS wire not less than 0.9mm dia complete.

Use & waste formwork to sides of pillars, posts, struts, piers, columns and stanchions complete.

Use & waste formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete

M & L for RCC type B1 1:2:4 as in columns, pillars, piers, posts and struts

M & L for RCC type B1 1:2:4 as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete

Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame).

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m ( without taking shutters from the frame).

M & L for powder coating anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete.

M & L for Granite (Z black or as approved by PMG) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing complete incl 10 mm thick screed bed in cement mortar 1:4 complete.

M & L for providing and fixing 12 mm thick toughened glass shutter door ans stainless steel fancy type handles (04 Nos), (floor spring 02 Nos) including grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of walls with suitable arrangement.

S & F 6mm thick figured glass, pin head type and glazing with rubber beading in squares or rectangle shape exc 0.5 sq. m in each pane complete all as specified and directed complete.

S&F of 1000 Lrts capacity white rotational Moulded ploythene water storage tank (cylinderical vertical with closed top) multilayered hoisted and fixed in position incl dismantling of existing tanks.

M & L Ball brass valves 25 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

S & F of 25 mm dia tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors including necessary chase cutting complete.

S & F of 20 mm dia tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors including necessary chase cutting complete.

S & F 110 mm dia bore PVC (SWR) bends any radius Make-Reliance, finolex, Supreme, Kisan, Prince all as specified and as directed.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC(SWR) 110mm Tee with access door Make-Reliance/finolex/ Supreme/ Kisan /Prince all as specified and as directed

S & F as in repairs 8.00mm thick wood grain colour PVC decorative sheet in strips including channel & angles feathered at the edges for fixing on solid decorative pvc wall lining, insulated pvc wall lining, and solid pvc partitions inclusive of solvent cement and fixing at site including necessary frame work for wall panelling and dismantling of existing wall panelling all as specified and directed by Engr-in-charge.

M&L for preparation of new or old plastered surfaces and applying 2.00 mm thick birla white putty/ JK white wall care putty and making the surfaces smooth & uniform complete all as specified and as directed.

M&L for Distempering two or more coats on new work with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Make : Asian Paints Royale or equivalent)

M&L for finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed. Make : Asian Paints Ultima Allura Graniza/Berger Paints Florentina Sand Stone

M&L for providing water proofing treatment over cleaned roof surfaces with super thermo APP modified water froofing membran comprssing of following for non-approachable roof:- (i) Removal of existing roof treatment and cleaning sweeping and washing and down with water to remove all dust etc from plastred roof surfaces/wall and filling of crack with sealing compound etc. (ii) Bitumen based primer conforming to IS 3384-1965 at 0.30 kg per sqm. (iii) One layer of super thermo APP modified water proofing membran with non polyster reinforcement of Make (M/S STP texsa Ltd/hyperplus membrane of M/S IWL India Ltd. M/S STP and Tikki Tar Ltd) 3mm thick and minimum weight @ 3.50 Kg/sqm laid with gas torch and fasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooving and making good with PCC gola 1:2:4 type B1 etc adhere to bitumen all as per manufacturer instructions.

Dismantling of machine pressed precast concrete interlocking paver block of any shape any size and laid dry or laid dry and pointed in any mortar complete all as specified and directed.

M & L machine pressed precast concrete interlocking paver block coloured rubber moulded any shape any size with grey cement and pigment any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation complete.

M & L 75mm thick cement concrete type C1, PCC (1:3:6) (40mm graded stone aggregate) as in plinth protection as directed by Engr -in -charge

M & L for machine pressed chequered cement concrete tiles 30cm x 30cm x 30mm thick with grey cement and pigment including 20 mm thick screed bed in cement mortar 1:4 complete.

S & F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc nd similar work conforming to Fe.290. Gde-E-165 complete all as directed & specified.

S & F of framed work as in ornamental structure including moulding, cuttings, and made to shape as directed with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars and similar work conforming to Fe.290. Gde-E-165 complete all as directed & specified.

S & F of Pre-painted (Red Colour) galvalume aluminum zinc coating GI based tile profile galvalum sheet 0.42mm thick of red colour as in roof covering/cladding to wall inlcuding cutting, moulding in shape fixed with self tapping screws as specified.

M&L for RCC 1:2:4 type B1 (using 20mm graded aggregate) in beams, cantilevers, bressumm ers, lintel over 1.5 mtr span complete all as specified and directed.

Use & waste formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves incl supports, overhangs, etc. also splays between floors and beams, etc.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete and kept in safe custody at a place directed by Engr-in-Charge for refixing the same all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Make : Excel Total/ Ultima Protek Lamino/Weather Coat Long Life 10

Surface excavation not exc 30 cm deep and averaging 15 cm in hard/dense soil complete all as specified.

Excavating over areas, n exc 1.5 m deep and getting out in hard/ dense soil.

Removing excavated material n.exc 50 m distance and depositing where directed at a level n exc 1.5m above the starting point in soil.

Rolling and consolidating formation surfaces in cutting by 8 to 12 Tonne power Roller complete all as specified & as directed

M & L for Soling (or sub base) 200 mm spread thickness with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required.

M & L for 150mm thick (compacted thickness) in two layers 7.5cm each layer WBM with coarse aggregate of grading (63 to 40mm size) granite trap or basalt, spread, rolled and consolidated to gradient and camber required with power roller complete all as specified & as directed (Note : Each layer will be measured and paid seperately)

M & L for preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with broom and finally fanning the cleared surface with gunny bags to remove all loose dirt etc on unsurfaced water bound macadam complete all as specified & as directed

M & L for preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with broom and finally fanning the cleared surface with gunny bags to remove all loose dirt etc on black top surfaces complete all as specified & as directed

M & L for applying evenly a priming/tack coat with paving bitumen primer at 10 Kg per 10 Sqm complete all as specified & as directed.

M & L for applying evenly a priming/tack coat with paving bitumen primer at 5 Kg per 10 Sqm complete all as specified & as directed.

M & L for 50 mm thich Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness) with Paving bitumen 4.00% of any penetration complete.

M & L for Bituminous premix asphaltic dense concrete 40mm consolidated thickness with 5.50% binder content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified.

M & L for Bituminous premix asphaltic dense concrete 30mm consolidated thickness with 5.50% binder content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified.

M & L for Cement concrete Type C-1 1:3:6 as in providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work.

Laying of machine pressed precast concrete interlocking paver block of any shape any size (except tiles) with sand cushioning at same or other location with proper slope complete all as specified and directed.

M&L for one coat of glazed lacquer paint with epoxy resin and hardener (Make : Granotone) including prepration of old painted surfaces on brick, stone concrete, asbestos cement or plaster surface of any discription over 10cm girth not otherwise described.

M&L 450 mm dia RCC Hume pipe CL NP2 laid and jointed complete with collars complete.

M&L for PCC 1:4:8 cement concrete type C2 for bedding and Sides of Hume pipe complete all as specified and directed.

Material and labour for painting centre line arrow dashes letters etc not exc 10 cm wide on roads pavement with retro reflective thermoplastic roads marking paint not less than 2mm thick of approved make applied with machine as per manufacturers instruction including preparation of surfaces complete all as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete and kept in safe custody at a place directed by Engr-in-Charge for refixing the same all as specified and directed.

Dismantling of framed trusses n. exc 10 mtr in length and removing to place as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Labour only for fixing of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc nd similar work conforming to Fe.290. Gde-E-165 complete all as directed & specified.

S & F Pre- painted galvalume aluminum zinc coating (AZ 150) GI based corrugated steel sheet 0.50mm thick, coloured having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws at every alternate corrugations as specified and directed.

S & F pre-painted galvalume aluminum zinc coating (AZ 150) GI based plain steel sheet 0.5mm thick of any coloure in ridge having tensile strength of 550 Mpa fixed with self tapping screws as spd and directed by eng-in-charge etc.

M & L for applying two coat of synthetic enamel paint over one coat of red oxide primer incl preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described.

M & L for applying one coat of synthetic enamel paint incl preparation of old steel surfaces of any description, over 10cm in width or girth,not otherwise described

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of any size from surface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed FRLS multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC concealed conduit pipe medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with terminal boxes concealed on wall, with modular inner & outer cover for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed. Make of Wire : Havells/ Finolex/ Plaza Note: Rate of modular cover plates with frame and modular metal terminal flush boxes are paid seperately in respected items.

(a) One light/fan/bell point controlled by one switch 5 Amp single pole one way

(b) One socket outlet 5/3 pin 5 Amps controlled by one switch on the same board.

(c) One socket outlet 5/3 pin 5 Amps controlled by one switch on the independant board.

S & F modular switch piano type 10 Amps one way single pole 240 volts AC complete all as specified and directed.

S & F modular socket outlet 10 Amps 5 pin 240 Volts multi socket 2 pin+ 3 pin complete all as specified and directed.

S & F modular white cover plate with frame 3 module

S & F modular white cover plate with frame 6 module

S & F modular metal flush box for 3 module

S & F modular metal flush box for 6/8 module

S & F ceiling rose surface bakelite 65x50mm 2 to 3 terminal

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S & F in replacement decorative wall mounted LED light fixture suitable for and including 9/10 watt B22 base LED lamp watts, 230 volts with lamp holder all accessories internally pre wired and including necessary mounting arrangements and provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S & F Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc concealed in walls etc for laying of service wire of size 25 mm (external dia) complete all as specified and directed.

Supply and laying or fixing or passing in replacement through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed in service connections nominal cross section 10 Sqmm x 2 core solid conductor complete all as specified and directed.

S & F in replacement PVC Junction box of size 155mm x 210mm x 92mm outdoor type, IP-66 weather proof, factory made out of PVC sheet with integrated membranes / metric knockouts having locking arrangement with nuts & bolts & arrangement for incoming and outgoing cable/wire complete comprising of aluminium bus bar for phases & neutral, insulated with insulators, including colour coding complete all as specified and directed. Make: Hensal Cat Part No. DK 1616 G

S & F in replacement energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source and electronic driver complete with all accessories suitable for and including lamp warm white or RGB 100 watt including connecting with 4.0 Sqmm twin core aluminium cable from junction box to fitting passed through PVC conduit for making necessary electric connections. Make: Bajaj Cat Part No: 169834 BJFL 100W LED

M/S VIKAS CONSTRUCTION CO.

UMESH SINGH

M/S CHAUHAN CONSTRUCTION

BISHWNATH KUMAR BHARTI