Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical TECHNICALLY QUALIFIED |
| 2 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical No EMD or Fee received |
Tender Value
₹53.4 L
EMD Value
₹1.1 L
Closing Date
4 May 2026, 12:00 pmClosed
DIRECTOR SWACH PROJECT UDAIPUR
BADI ROAD HAWALA KHURD UDAIPUR
Major works at Nana Bhai Khant Boys Ashram Hostel Badgama Chikhali Distt Dungarpur
2026_SWACH_552511_18
03/2026-27
Open Tender
Civil Works
Percentage
180 days
UDAIPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
DIRECTOR SWACH PROJECT
₹1.1 L
Yes
12 May 2026
18 Apr 2026
4 May 2026
18 Apr 2026
4 May 2026
18 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repair of door, window shutters including cost of material and labour for change of damaged : Aldrop of mild Steel 12" long x12mm dia | - | Each | - | - |
| 2 | Steel Hinges For Wooden Chowkhat 4" size. | - | Each | - | - |
| 3 | Steel Handle 6" size | - | Each | - | - |
| 4 | Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. | - | Sqm | - | - |
| 5 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. | - | Sqm | - | - |
| 6 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. | - | Kg | - | - |
| 7 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 35 mm thick. Commercial Veneer both side | - | Sqm | - | - |
| 8 | Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. | - | Sqm | - | - |
| 9 | Providing and fixing of double leaf steel shutter for cupboard, the Sqm frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge | - | Sqm | - | - |
| 10 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated „J‟ or „L‟ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2.0mm thick (Wt. 3.3 Kg./Mtr. Sq.) | - | Sqm | - | - |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.11 MB
BOQ_984793.xls
BOQ • 0.57 MB
45TDBadgamaChikhaliDungarpur.pdf
Tender Documents • 4.87 MB
DATECORR.pdf
PDF • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .