Loading…
Loading…
Tender Value
₹15.4 Cr
EMD Value
₹9.2 L
Closing Date
13 Mar 2026, 3:00 pmClosed
GWCB:Development of Gondawali Goods Shed under Assistant Divisional Engineer Beohari Sub-division.
DRMW-JBP-26-2026
DRMW-JBP-26-2026
Open
18 Months
Shahdol, Madhya Pradesh
₹0
₹9.2 L
17 Feb 2026
17 Feb 2026
27 Feb 2026
Item- 1 All items are based on DSR-2021 item
S No. Item No Description of Item Unit Qty Rate Amount
2.0 EARTH WORK
Earth work in excavation by mechanical
means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5 m
2.6 in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth
lead upto 50 m and lift upto 1.5 m, as
directed by Engineer-in-charge.
2.25A Excavating, supplying and filling of local earth cum 50 368.65 18432.5
(including royalty) by mechanical transport
upto a lead of 5km also including ramming
and watering of the earth in layers not
exceeding 20 cm in trenches, plinth, sides of
foundation etc. complete.
4.0 CONCRETE WORK
4.1S CEMENT CONCRETE (CAST IN SITU)
Providing and laying in position cement
concrete of specified grade excluding the cost
of centering and shuttering - All work up to
derived from natural sources : 6 graded stone
aggregate 20 mm nominal size derived from
natural sources)
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
Providing and laying cement concrete in
retaining walls, return walls, walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
4.2 struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks,
plain window sills, fillets, sunken floor etc., up
to floor five level, excluding the cost of
centering, shuttering and finishing:
derived from natural sources : 4 graded stone
aggregate 20 mm nominal size derived from
natural sources)
Centering and shuttering including strutting,
propping etc. and removal of form work for :
5 4.3.1 Foundations, footings, bases for columns Sqm 15 307.95 4619.25
5.0 REINFORCED CEMENT CONCRETE
5.1S CAST IN SITU
Providing and laying in position specified
grade of reinforced cement concrete,
5.1 excluding the cost of centering, shuttering,
finishing and reinforcement - All work up to
derived from natural sources: 3 graded stone
aggregate 20 mm nominal size derived from
natural sources)
5.9S FORM WORK
Centering and shuttering including strutting,
propping etc. and removal of form for
5.9.1 Foundations, footings, bases of columns, etc. Sqm 20 307.95 6159
for mass concrete
5.9.3 Suspended floors, roofs, landings, balconies Sqm 40 766.55 30662
and access platform
5.9.5 Lintels, beams, plinth beams, girders, Sqm 35 608.35 21292.25
bressumers and cantilevers
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Sqm 20 804.25 16085
5.12S PRE-CAST RCC
5.12 Providing, hoisting and fixing above plinth cum 6 9673.5 58041
level up to floor five level precast reinforced
cement concrete work in string courses,
bands, copings, bed plates, anchor blocks,
plain window sills and the like, including the
11 cost of required centering, shuttering but ,
excluding cost of reinforcement with 1:1.5:3
(1 cement : 1.5 coarse sand(zone-III) derived
from natural sources : 3 graded stone
aggregate 20 mm nominal size derived from
natural sources).
5.22S STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in
position and binding all complete upto plinth
5.22.6 Thermo-Mechanically Treated bars of grade Kg 1700 89.65 152405
Fe-500D or more.
6.0 MASONRY WORK
6.26S EXPOSED BRICK WALL
Brick work with clay flyash F.P.S. (non
modular) brick of class designation 7.5 in
superstructure above plinth level up to floor
five level in :
9.0 WOOD AND P.V.C. WORK
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
Providing and fixing glazed shutters for doors,
windows and clerestory windows using 4 mm
thick float glass panes, (weight not less than
10 kg per sqm) fixing with ISI marked M.S.
pressed butt hinges bright finished of required
size with necessary screws.
Extra for providing heavy sheet float glass
panes instead of ordinary float glass in glazed
doors, windows and clerestory window
shutters. (Area of opening for glass panes
excluding portion inside rebate shall be
14 per sqm) instead of 4 mm thick. (weight not
less than 10 kg per sqm)
9.12 Extra for providing frosted glass panes 4 mm Sqm 5 148.5 742.5
thick (weight not less than 10 kg per sqm)
instead of ordinary float glass panes 4 mm
thick (weight not less than 10 kg per sqm) in
doors, windows and clerestory window
shutters. (Area of opening for glass panes
excluding portion inside rebate shall be
Providing and fixing 25 mm thick shutters for
cup board etc. :
Providing and fixing ISI marked flush door
shutters conforming to IS : 2202 (Part I) non-
decorative type, core of block board
9.21 construction with frame of 1st class hard
wood and well matched commercial 3 ply
veneering with vertical grains or cross bands
and face veneers on both faces of shutters:
9.21.2 30 mm thick including ISI marked Stainless Sqm 4 1881.95 7527.8
Steel butt hinges with necessary screws
Extra for Providing and fixing flush doors with
decorative veneering instead of non
decorative ISI marked flush door shutters
conforming to IS: 2202 (Part I)
9.40S MISCELLANEOUS-WOOD WORK
Providing and fixing fly proof galvanized M.S.
wire gauge to windows and clerestory
9.51 windows using wire gauge with average width
of aperture 1.4 mm in both directions with
wire of dia 0.63 mm all complete.
ANODISED ALUMINIUM FITTINGS (ALL
FITTINGS SHALL BE ISI MARKED)
Providing and fixing aluminium sliding door
bolts, ISI marked anodised (anodic coating not
9.96 less than grade AC 10 as per IS : 1868),
transparent or dyed to required colour or
shade, with nuts and screws etc. complete :
Providing and fixing aluminium handles, ISI
marked, anodised (anodic coating not less
9.100 than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or
shade, with necessary screws etc. complete :
10.0 STEEL WORK
Steel work welded in built up sections/ framed
work, including cutting, hoisting, fixing in
10.25 position and applying a priming coat of
approved steel primer using structural steel
etc. as required.
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
10.25.2 In gratings, frames, guard bar, ladder, railings, Kg 120 142.3 17076
brackets, gates and similar works
11.0 FLOORING
11.41S VITRIFIED FLOOR TILES
Providing and laying vitrified floor tiles in
different sizes (thickness to be specified by
the manufacturer) with water absorption less
than 0.08% and conforming to IS: 15622, of
approved make, in all colours and shades, laid
on 20mm thick cement mortar 1:4 (1 cement :
4 coarse sand), jointing with grey cement
slurry @ 3.3 kg/ sqm including grouting the
joints with white cement and matching
pigments etc., complete.
12.0 ROOFING
Providing, fixing and embedding sand cast
iron accessories for rain water pipes in the
masonry surrounded with 12 mm thick
cement mortar of the same mix, as that of
masonry (lead caulking will be paid for
Providing and fixing on wall face unplasticised
Rigid PVC rain water pipes conforming to IS :
13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap
for thermal expansion, (i) Single socketed
13.0 FINISHING
13.1S CEMENT PLASTER (IN FINE SAND)
13.1 12 mm cement plaster of mix :
13.25 Extra for plastering:
13.26 Providing and applying plaster of paris putty Sqm 150 214.3 32145
of 2 mm thickness over plastered surface to
prepare the surface even and smooth
Wall painting with acrylic emulsion paint of
13.60 approved brand and manufacture to give an
Painting with synthetic enamel paint of
13.61 approved brand and manufacture to give an
17.0 SANITARY INSTALLATIONS
Providing and fixing water closet squatting
pan (Indian type W.C. pan ) with 100 mm
sand cast Iron P or S trap, 10 litre low level
white P.V.C. flushing cistern, including flush
17.1 pipe, with manually controlled device (handle
lever) conforming to IS : 7231, with all fittings
and fixtures complete, including cutting and
making good the walls and floors wherever
17.1.1 White Vitreous china Orissa pattern W.C. pan Each 2 5781.35 11562.7
28 of size 580x440 mm with integral type foot
Providing and fixing wash basin with C.I.
brackets, 15 mm C.P. brass pillar taps, 32 mm
C.P. brass waste of standard pattern,
including painting of fittings and brackets,
cutting and making good the walls wherever
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
17.7.2 White Vitreous China Wash basin size Each 2 1913.75 3827.5
29 630x450 mm with a single 15 mm C.P. brass
Providing and fixing P.V.C. waste pipe for sink
17.28 or wash basin including P.V.C. waste fittings
17.28.1 Semi rigid pipe
18.0 WATER SUPPLY
18.7S C.P.V.C. PIPES
Providing and fixing G.I. pipes complete with
18.12 G.I. fittings including trenching and refilling
etc.-External work
C.I. SLUICE VALVES/ FIRE HYDRANTS &
Providing and fixing G.I. Union in G.I. pipe
including cutting and threading the pipe and
making long screws etc. complete (New work)
18.48 Providing and placing on terrace (at all floor Litre 500 9.7 4850
levels) polyethylene water storage tank, IS :
12701 marked, with cover and suitable
locking arrangement and making necessary
holes for inlet, outlet and overflow pipes but
without fittings and the base support for tank.
18.54S PTMT FITTINGS
Providing and fixing PTMT bib cock of
approved quality and colour.
18.54.1 15mm nominal bore, 86 mm long, weighing Each 3 109.85 329.55
not less than 88 gms
Providing and fixing PTMT stop cock of
approved quality and colour.
18.55.1 15 mm nominal bore, 86 mm long, weighing Each 2 103.15 206.3
not less than 88 gms
Providing and fixing PTMT grating of approved
quality and colour.
18.58.1 Circular type
18.59S AIR VALVE & WATER METER (BULK TYPE)
Providing and fixing PTMT Ball cock of
approved quality, colour and make complete
with Epoxy coated aluminium rod with L.P./
H.P.H.D. plastic ball.
18.62.1 15 mm nominal bore, 105 mm long, weighing Each 1 161.55 161.55
not less than 138 gms
Providing and fixing unplasticised P.V.C.
18.74 connection pipe with PTMT Nuts, collar and
bush of approved quality and colour.
19.0 DRAINAGE
19.1S STONE WARE PIPES AND FITTINGS
Providing, laying and jointing glazed
stoneware pipes class SP-1 with stiff mixture
19.1 of cement mortar in the proportion of 1:1 (1
cement : 1 fine sand) including testing of
joints etc. complete :
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
21.0 ALUMINIUM WORK
Providing and fixing aluminium work for doors,
windows, ventilators and partitions with
extruded built up standard tubular sections/
appropriate Z sections and other sections of
approved make conforming to IS: 733 and IS:
1285, fixing with dash fasteners of required
dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and
sides with required EPDM rubber/ neoprene
gasket etc. Aluminium sections shall be
smooth, rust free, straight, mitred and jointed
mechanically wherever required including
cleat angle, Aluminium snap beading for
glazing / paneling, C.P. brass / stainless steel
screws, all complete as per architectural
drawings and the directions of Engineer-in-
charge. (Glazing, paneling and dash fasteners
to be paid for separately) :
21.1.1 For fixed portion
21.1.1.1 Anodised aluminium (anodised transparent or Kg 10 433.95 4339.5
43 dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15)
For shutters of doors, windows & ventilators
including providing and fixing hinges/ pivots
and making provision for fixing of fittings
wherever required including the cost of EPDM
rubber / neoprene gasket required (Fittings
shall be paid for separately)
21.1.2.1 Anodised aluminium (anodised transparent or Kg 10 531.8 5318
44 dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15)
Schedule Schedule F-GWCB-CGS room along with drinking water facility, toilet, urinal etc. 5.00m x 4.00m.
Item- 1 All items are based on DSR-2021 item
S No. Item No Description of Item Unit Qty Rate Amount
2.0 EARTH WORK
Earth work in excavation by mechanical
means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5 m
2.6 in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth
lead upto 50 m and lift upto 1.5 m, as
directed by Engineer-in-charge.
2.25A Excavating, supplying and filling of local earth cum 15 368.65 5529.75
(including royalty) by mechanical transport
upto a lead of 5km also including ramming
and watering of the earth in layers not
exceeding 20 cm in trenches, plinth, sides of
foundation etc. complete.
4.0 CONCRETE WORK
4.1S CEMENT CONCRETE (CAST IN SITU)
Providing and laying in position cement
concrete of specified grade excluding the cost
of centering and shuttering - All work up to
derived from natural sources : 6 graded stone
aggregate 20 mm nominal size derived from
natural sources)
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
Providing and laying cement concrete in
retaining walls, return walls, walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
4.2 struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks,
plain window sills, fillets, sunken floor etc., up
to floor five level, excluding the cost of
centering, shuttering and finishing:
derived from natural sources : 4 graded stone
aggregate 20 mm nominal size derived from
natural sources)
Centering and shuttering including strutting,
propping etc. and removal of form work for :
5 4.3.1 Foundations, footings, bases for columns Sqm 8 307.95 2463.6
5.0 REINFORCED CEMENT CONCRETE
5.1S CAST IN SITU
Providing and laying in position specified
grade of reinforced cement concrete,
5.1 excluding the cost of centering, shuttering,
finishing and reinforcement - All work up to
derived from natural sources: 3 graded stone
aggregate 20 mm nominal size derived from
natural sources)
5.4 Providing and laying up to floor five level cum 1 9801.75 9801.75
reinforced cement concrete in kerbs, steps
and the like excluding the cost of centering,
shuttering, finishing and reinforcement with
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)
derived from natural sources : 3 graded stone
aggregate 20 mm nominal size derived from
natural sources).
5.9S FORM WORK
Centering and shuttering including strutting,
propping etc. and removal of form for
5.9.1 Foundations, footings, bases of columns, etc. Sqm 12 307.95 3695.4
for mass concrete
5.9.3 Suspended floors, roofs, landings, balconies Sqm 20 766.55 15331
and access platform
5.9.5 Lintels, beams, plinth beams, girders, Sqm 15 608.35 9125.25
bressumers and cantilevers
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Sqm 12 804.25 9651
5.12S PRE-CAST RCC
5.12 Providing, hoisting and fixing above plinth cum 1 9673.5 9673.5
level up to floor five level precast reinforced
cement concrete work in string courses,
bands, copings, bed plates, anchor blocks,
plain window sills and the like, including the
12 cost of required centering, shuttering but ,
excluding cost of reinforcement with 1:1.5:3
(1 cement : 1.5 coarse sand(zone-III) derived
from natural sources : 3 graded stone
aggregate 20 mm nominal size derived from
natural sources).
5.22S STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in
position and binding all complete upto plinth
5.22.6 Thermo-Mechanically Treated bars of grade Kg 650 89.65 58272.5
Fe-500D or more.
6.0 MASONRY WORK
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
6.26S EXPOSED BRICK WALL
Brick work with clay flyash F.P.S. (non
modular) brick of class designation 7.5 in
superstructure above plinth level up to floor
five level in :
9.0 WOOD AND P.V.C. WORK
Providing and fixing glazed shutters for doors,
windows and clerestory windows using 4 mm
thick float glass panes, (weight not less than
10 kg per sqm) fixing with ISI marked M.S.
pressed butt hinges bright finished of required
size with necessary screws.
Extra for providing heavy sheet float glass
panes instead of ordinary float glass in glazed
doors, windows and clerestory window
shutters. (Area of opening for glass panes
excluding portion inside rebate shall be
15 per sqm) instead of 4 mm thick. (weight not
less than 10 kg per sqm)
9.12 Extra for providing frosted glass panes 4 mm Sqm 2 148.5 297
thick (weight not less than 10 kg per sqm)
instead of ordinary float glass panes 4 mm
thick (weight not less than 10 kg per sqm) in
doors, windows and clerestory window
shutters. (Area of opening for glass panes
excluding portion inside rebate shall be
Providing and fixing 25 mm thick shutters for
cup board etc. :
Providing and fixing ISI marked flush door
shutters conforming to IS : 2202 (Part I) non-
decorative type, core of block board
9.21 construction with frame of 1st class hard
wood and well matched commercial 3 ply
veneering with vertical grains or cross bands
and face veneers on both faces of shutters:
9.21.2 30 mm thick including ISI marked Stainless Sqm 2 1881.95 3763.9
Steel butt hinges with necessary screws
Extra for Providing and fixing flush doors with
decorative veneering instead of non
decorative ISI marked flush door shutters
conforming to IS: 2202 (Part I)
9.40S MISCELLANEOUS-WOOD WORK
Providing and fixing fly proof galvanized M.S.
wire gauge to windows and clerestory
9.51 windows using wire gauge with average width
of aperture 1.4 mm in both directions with
wire of dia 0.63 mm all complete.
ANODISED ALUMINIUM FITTINGS (ALL
FITTINGS SHALL BE ISI MARKED)
Providing and fixing aluminium sliding door
bolts, ISI marked anodised (anodic coating not
9.96 less than grade AC 10 as per IS : 1868),
transparent or dyed to required colour or
shade, with nuts and screws etc. complete :
Providing and fixing aluminium handles, ISI
marked, anodised (anodic coating not less
9.100 than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or
shade, with necessary screws etc. complete :
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
10.0 STEEL WORK
Steel work welded in built up sections/ framed
work, including cutting, hoisting, fixing in
10.25 position and applying a priming coat of
approved steel primer using structural steel
etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, Kg 100 142.3 14230
brackets, gates and similar works
11.0 FLOORING
11.41S VITRIFIED FLOOR TILES
Providing and laying vitrified floor tiles in
different sizes (thickness to be specified by
the manufacturer) with water absorption less
than 0.08% and conforming to IS: 15622, of
approved make, in all colours and shades, laid
on 20mm thick cement mortar 1:4 (1 cement :
4 coarse sand), jointing with grey cement
slurry @ 3.3 kg/ sqm including grouting the
joints with white cement and matching
pigments etc., complete.
12.0 ROOFING
Providing, fixing and embedding sand cast
iron accessories for rain water pipes in the
masonry surrounded with 12 mm thick
cement mortar of the same mix, as that of
masonry (lead caulking will be paid for
Providing and fixing on wall face unplasticised
Rigid PVC rain water pipes conforming to IS :
13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap
for thermal expansion, (i) Single socketed
13.0 FINISHING
13.1S CEMENT PLASTER (IN FINE SAND)
13.1 12 mm cement plaster of mix :
13.25 Extra for plastering:
13.26 Providing and applying plaster of paris putty Sqm 80 214.3 17144
of 2 mm thickness over plastered surface to
prepare the surface even and smooth
Wall painting with acrylic emulsion paint of
13.60 approved brand and manufacture to give an
Painting with synthetic enamel paint of
13.61 approved brand and manufacture to give an
17.0 SANITARY INSTALLATIONS
Providing and fixing water closet squatting
pan (Indian type W.C. pan ) with 100 mm
sand cast Iron P or S trap, 10 litre low level
white P.V.C. flushing cistern, including flush
17.1 pipe, with manually controlled device (handle
lever) conforming to IS : 7231, with all fittings
and fixtures complete, including cutting and
making good the walls and floors wherever
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
17.1.1 White Vitreous china Orissa pattern W.C. pan Each 1 5781.35 5781.35
29 of size 580x440 mm with integral type foot
Providing and fixing wash basin with C.I.
brackets, 15 mm C.P. brass pillar taps, 32 mm
C.P. brass waste of standard pattern,
including painting of fittings and brackets,
cutting and making good the walls wherever
17.7.2 White Vitreous China Wash basin size Each 2 1913.75 3827.5
30 630x450 mm with a single 15 mm C.P. brass
Providing and fixing P.V.C. waste pipe for sink
17.28 or wash basin including P.V.C. waste fittings
17.28.1 Semi rigid pipe
18.0 WATER SUPPLY
18.7S C.P.V.C. PIPES
Providing and fixing G.I. pipes complete with
18.12 G.I. fittings including trenching and refilling
etc.-External work
C.I. SLUICE VALVES/ FIRE HYDRANTS &
Providing and fixing G.I. Union in G.I. pipe
including cutting and threading the pipe and
making long screws etc. complete (New work)
18.48 Providing and placing on terrace (at all floor Litre 500 9.7 4850
levels) polyethylene water storage tank, IS :
12701 marked, with cover and suitable
locking arrangement and making necessary
holes for inlet, outlet and overflow pipes but
without fittings and the base support for tank.
18.54S PTMT FITTINGS
Providing and fixing PTMT bib cock of
approved quality and colour.
18.54.1 15mm nominal bore, 86 mm long, weighing Each 3 109.85 329.55
not less than 88 gms
Providing and fixing PTMT stop cock of
approved quality and colour.
18.55.1 15 mm nominal bore, 86 mm long, weighing Each 2 103.15 206.3
not less than 88 gms
Providing and fixing PTMT grating of approved
quality and colour.
18.58.1 Circular type
18.59S AIR VALVE & WATER METER (BULK TYPE)
Providing and fixing PTMT Ball cock of
approved quality, colour and make complete
with Epoxy coated aluminium rod with L.P./
H.P.H.D. plastic ball.
18.62.1 15 mm nominal bore, 105 mm long, weighing Each 1 161.55 161.55
not less than 138 gms
Providing and fixing unplasticised P.V.C.
18.74 connection pipe with PTMT Nuts, collar and
bush of approved quality and colour.
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
21.0 ALUMINIUM WORK
Providing and fixing aluminium work for doors,
windows, ventilators and partitions with
extruded built up standard tubular sections/
appropriate Z sections and other sections of
approved make conforming to IS: 733 and IS:
1285, fixing with dash fasteners of required
dia and size, including necessary filling up the
gaps at junctions, i.e. at top, bottom and
sides with required EPDM rubber/ neoprene
gasket etc. Aluminium sections shall be
smooth, rust free, straight, mitred and jointed
mechanically wherever required including
cleat angle, Aluminium snap beading for
glazing / paneling, C.P. brass / stainless steel
screws, all complete as per architectural
drawings and the directions of Engineer-in-
charge. (Glazing, paneling and dash fasteners
to be paid for separately) :
21.1.1 For fixed portion
21.1.1.1 Anodised aluminium (anodised transparent or Kg 8 433.95 3471.6
43 dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15)
For shutters of doors, windows & ventilators
including providing and fixing hinges/ pivots
and making provision for fixing of fittings
wherever required including the cost of EPDM
rubber / neoprene gasket required (Fittings
shall be paid for separately)
21.1.2.1 Anodised aluminium (anodised transparent or Kg 8 531.8 4254.4
44 dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15)
Schedule Schedule G-GWCB-Drinking water facility with pipe line.
Item- 1 All items are based on DSR-2021 item
S No. Item No Description of Item Unit Qty Rate Amount
2.0 EARTH WORK
Earth work in excavation by mechanical
means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5 m
2.6 in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth
lead upto 50 m and lift upto 1.5 m, as
directed by Engineer-in-charge.
4.0 CONCRETE WORK
4.1S CEMENT CONCRETE (CAST IN SITU)
Providing and laying cement concrete in
retaining walls, return walls, walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
4.2 struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks,
plain window sills, fillets, sunken floor etc., up
to floor five level, excluding the cost of
centering, shuttering and finishing:
derived from natural sources : 4 graded stone
aggregate 20 mm nominal size derived from
natural sources)
6.0 MASONRY WORK
6.26S EXPOSED BRICK WALL
Brick work with clay flyash F.P.S. (non
modular) brick of class designation 7.5 in
superstructure above plinth level up to floor
five level in :
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
10.0 STEEL WORK
Steel work welded in built up sections/ framed
work, including cutting, hoisting, fixing in
10.25 position and applying a priming coat of
approved steel primer using structural steel
etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, Kg 1200 142.3 170760
brackets, gates and similar works
12.0 ROOFING
Providing and fixing on wall face unplasticised
- PVC moulded fittings/ accessories for
unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including
jointing with seal ring conforming to IS : 5382,
leaving 10 mm gap for thermal expansion.
12.50 Providing and fixing precoated galvanised iron Sqm 80 671.55 53724
profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-
charge) 0.50 mm (+ 0.05 %) total coated
thickness with zinc coating 120 grams per
sqm as per IS: 277, in 240 mpa steel grade, 5-
7 microns epoxy primer on both side of the
sheet and polyester top coat 15-18 microns.
Sheet should have protective guard film of 25
5 microns minimum to avoid scratches during
transportation and should be supplied in
single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed
using self drilling /self tapping screws of size
(5.5x 55 mm) with EPDM seal, complete upto
any pitch in horizontal/ vertical or curved
surfaces, excluding the cost of purlins, rafters
and trusses and including cutting to size and
shape wherever required.
13.0 FINISHING
13.1S CEMENT PLASTER (IN FINE SAND)
13.1 12 mm cement plaster of mix :
Painting with synthetic enamel paint of
13.61 approved brand and manufacture to give an
18.0 WATER SUPPLY
18.7S C.P.V.C. PIPES
Providing and fixing G.I. pipes complete with
18.12 G.I. fittings including trenching and refilling
etc.-External work
18.15S BRASS FITTINGS
Providing and fixing gun metal gate valve with
C.I. wheel of approved quality (screwed end) :
C.I. SLUICE VALVES/ FIRE HYDRANTS &
Providing and fixing G.I. Union in G.I. pipe
including cutting and threading the pipe and
making long screws etc. complete (New work)
23.0 RAIN WATER HARVESTING & TUBEWELLS
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
Boring/drilling bore well of required dia for
casing/ strainer pipe, by suitable method
prescribed in IS: 2800 (part I), including
collecting samples from different strata,
preparing and submitting strata chart/ bore
log, including hire & running charges of all
equipments, tools, plants & machineries
required for the job, all complete as per
direction of Engineer-in-charge, upto 90
metre depth below ground level.
23.1.1 All types of soil
23.1.2 Rocky strata including Boulders
Boring/drilling bore well of required dia for
casing/ strainer pipe, by suitable method
prescribed in IS: 2800 (part I), including
collecting samples from different strata,
preparing and submitting strata chart/ bore
23.2 log, including hire & running charges of all
equipments, tools, plants & machineries
required for the job, all complete as per
direction of Engineer -in-charge, beyond 90
metre & upto 150 metre depth below ground
23.2.2 Rocky strata including Boulders
Supplying, assembling, lowering and fixing in
vertical position in bore well, unplasticized
PVC medium well casing (CM) pipe of required
23.3 dia, conforming to IS: 12818, including
required hire and labour charges, fittings &
accessories etc. all complete, for all depths,
as per direction of Engineer -in-charge.
Schedule Schedule H-GWCB-High level Dust Protection wall 1500mtr.
Item- 1 All items are based on DSR-2021 item
S No. Item No Description of Item Unit Qty Rate Amount
2.0 EARTH WORK
Earth work in excavation by mechanical
means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5 m
2.6 in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth
lead upto 50 m and lift upto 1.5 m, as
directed by Engineer-in-charge.
4.0 CONCRETE WORK
4.1S CEMENT CONCRETE (CAST IN SITU)
Providing and laying cement concrete in
retaining walls, return walls, walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
4.2 struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks,
plain window sills, fillets, sunken floor etc., up
to floor five level, excluding the cost of
centering, shuttering and finishing:
derived from natural sources : 4 graded stone
aggregate 20 mm nominal size derived from
natural sources)
10.0 STEEL WORK
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
Steel work welded in built up sections/ framed
work, including cutting, hoisting, fixing in
10.25 position and applying a priming coat of
approved steel primer using structural steel
etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, Kg 159500 142.3 22696850
brackets, gates and similar works
12.0 ROOFING
Providing and fixing on wall face unplasticised
- PVC moulded fittings/ accessories for
unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including
jointing with seal ring conforming to IS : 5382,
leaving 10 mm gap for thermal expansion.
12.50 Providing and fixing precoated galvanised iron Sqm 5850 671.55 3928567.5
profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-
charge) 0.50 mm (+ 0.05 %) total coated
thickness with zinc coating 120 grams per
sqm as per IS: 277, in 240 mpa steel grade, 5-
7 microns epoxy primer on both side of the
sheet and polyester top coat 15-18 microns.
Sheet should have protective guard film of 25
4 microns minimum to avoid scratches during
transportation and should be supplied in
single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed
using self drilling /self tapping screws of size
(5.5x 55 mm) with EPDM seal, complete upto
any pitch in horizontal/ vertical or curved
surfaces, excluding the cost of purlins, rafters
and trusses and including cutting to size and
shape wherever required.
13.0 FINISHING
Painting with synthetic enamel paint of
13.61 approved brand and manufacture to give an
Schedule Schedule I-GWCB-Sprinkling system with pipe line 1500 metere
Item- 1 All items are based on DSR-2021 item
S No. Item No Description of Item Unit Qty Rate Amount
2.0 EARTH WORK
Earth work in excavation by mechanical
means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5 m
2.6 in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth
lead upto 50 m and lift upto 1.5 m, as
directed by Engineer-in-charge.
4.0 CONCRETE WORK
4.1S CEMENT CONCRETE (CAST IN SITU)
Providing and laying cement concrete in
retaining walls, return walls, walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
4.2 struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks,
plain window sills, fillets, sunken floor etc., up
to floor five level, excluding the cost of
centering, shuttering and finishing:
derived from natural sources : 4 graded stone
aggregate 20 mm nominal size derived from
natural sources)
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
6.0 MASONRY WORK
6.26S EXPOSED BRICK WALL
Brick work with clay flyash F.P.S. (non
modular) brick of class designation 7.5 in
superstructure above plinth level up to floor
five level in :
10.0 STEEL WORK
Steel work welded in built up sections/ framed
work, including cutting, hoisting, fixing in
10.25 position and applying a priming coat of
approved steel primer using structural steel
etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, Kg 2200 142.3 313060
brackets, gates and similar works
12.0 ROOFING
Providing and fixing on wall face unplasticised
- PVC moulded fittings/ accessories for
unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including
jointing with seal ring conforming to IS : 5382,
leaving 10 mm gap for thermal expansion.
12.50 Providing and fixing precoated galvanised iron Sqm 80 671.55 53724
profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-
charge) 0.50 mm (+ 0.05 %) total coated
thickness with zinc coating 120 grams per
sqm as per IS: 277, in 240 mpa steel grade, 5-
7 microns epoxy primer on both side of the
sheet and polyester top coat 15-18 microns.
Sheet should have protective guard film of 25
5 microns minimum to avoid scratches during
transportation and should be supplied in
single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed
using self drilling /self tapping screws of size
(5.5x 55 mm) with EPDM seal, complete upto
any pitch in horizontal/ vertical or curved
surfaces, excluding the cost of purlins, rafters
and trusses and including cutting to size and
shape wherever required.
13.0 FINISHING
13.1S CEMENT PLASTER (IN FINE SAND)
13.1 12 mm cement plaster of mix :
Painting with synthetic enamel paint of
13.61 approved brand and manufacture to give an
18.0 WATER SUPPLY
18.7S C.P.V.C. PIPES
Providing and fixing G.I. pipes complete with
18.12 G.I. fittings including trenching and refilling
etc.-External work
18.15S BRASS FITTINGS
Providing and fixing gun metal gate valve with
C.I. wheel of approved quality (screwed end) :
C.I. SLUICE VALVES/ FIRE HYDRANTS &
JABALPUR DIVISION-ENGG/WEST CENTRAL RLY
Providing and fixing G.I. Union in G.I. pipe
including cutting and threading the pipe and
making long screws etc. complete (New work)
23.0 RAIN WATER HARVESTING & TUBEWELLS
Boring/drilling bore well of required dia for
casing/ strainer pipe, by suitable method
prescribed in IS: 2800 (part I), including
collecting samples from different strata,
preparing and submitting strata chart/ bore
log, including hire & running charges of all
equipments, tools, plants & machineries
required for the job, all complete as per
direction of Engineer-in-charge, upto 90
metre depth below ground level.
23.1.1 All types of soil
23.1.2 Rocky strata including Boulders
Boring/drilling bore well of required dia for
casing/ strainer pipe, by suitable method
prescribed in IS: 2800 (part I), including
collecting samples from different strata,
preparing and submitting strata chart/ bore
23.2 log, including hire & running charges of all
equipments, tools, plants & machineries
required for the job, all complete as per
direction of Engineer -in-charge, beyond 90
metre & upto 150 metre depth below ground
23.2.2 Rocky strata including Boulders
Supplying, assembling, lowering and fixing in
vertical position in bore well, unplasticized
PVC medium well casing (CM) pipe of required
23.3 dia, conforming to IS: 12818, including
required hire and labour charges, fittings &
accessories etc. all complete, for all depths,
as per direction of Engineer -in-charge.
Item Breakup - A-GWCB-Low level platform (724m x 25.00m)
Item Breakup - B-GWCB-Approach Road (C.C) 700.00m x 6.00m.
Item Breakup - C-GWCB-Provision of septic Tank/Soak Pit.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AnnexureVIB.pdf
ATTACHMENT
ACS8to10ofIRGCCApril2022.pdf
ATTACHMENT
Embletter.pdf
ATTACHMENT
Splcond.LetterofCredit.pdf
ATTACHMENT
Specialconditionofworkgondawalished.pdf
ATTACHMENT
TenderDocument.pdf
ATTACHMENT
Download all tender documents and submit your bid